Date: Mon, 14 Apr 1997 09:18:48 -0400 From: John Robert LoVerso <loverso@opengroup.org> To: mobile@freebsd.org Subject: 3c562 Message-ID: <199704141318.JAA14216@postman.osf.org>
index | next in thread | raw e-mail
[-- Attachment #1 --]
I have a laptop (using PAO-960831 with 2.1.5; it'll be upgraded later this
week) with which I've been successfully using a 3c589c. However, I also
have two different 3c562s, one with a 28.8 and one with a 33.3 modem. The
later, newer one claims to be a "3c562c".
I understand that there is no support yet for duplicating IRQs for
multifunction cards. I just want to get FreeBSD to use *either* the
modem *or* the Ethernet controller on the 562. Perferrably the Ethernet,
as it would allow me to give up the 589 (to someone else here who needs it).
Can anyone help me? Enclosed are the "pccardc dumpcis" output from all
three cards.
Thanks,
John
[-- Attachment #2 --]
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 66
000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69
010: 6f 6e 00 33 43 35 36 32 43 2f 33 43 35 36 33 43
020: 00 45 74 68 65 72 4c 69 6e 6b 20 49 49 49 00 4c
030: 41 4e 2b 4d 6f 64 65 6d 20 50 43 20 43 61 72 64
040: 00 ff
Version = 4.1, Manuf = [3Com Corporation],card vers = [3C562C/3C563C]
Addit. info = [EtherLink III],[LAN+Modem PC Card]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 62 05
PCMCIA ID = 0x101, OEM ID = 0x562
Tuple #4, code = 0x12 (Long link to common memory), length = 4
000: 00 00 00 00
Long link to common memory, address 0x0
Tuple #5, code = 0x1a (Configuration map), length = 6
000: 05 09 80 10 ff 03
Reg len = 2, config register addr = 0x1080, last config = 0x9
Registers: XXXXXXXX XX------
Tuple #6, code = 0x1b (Configuration entry), length = 15
000: c9 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff
Config index = 0x9(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 5.0 x 100 us
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 09 01 71 55 26 26 54
Config index = 0x9
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2 x 100mA
Max current average over 10 ms: 2 x 100mA
Power down supply current: 5 x 1mA
Tuple #8, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #9, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #10, code = 0x10 (Checksum), length = 5
000: 81 ff 89 00 00
Checksum from offset -127, length 137, value is 0x0
Tuple #11, code = 0xff (Terminator), length = 112
000: 00 13 03 43 49 53 21 02 06 00 1a 06 05 07 80 10
010: ff 03 1b 0f c7 01 1d 71 55 35 55 54 e0 72 5d 64
020: 30 ff ff 1b 07 07 01 71 55 26 26 54 ff 13 03 43
030: 49 53 21 02 02 01 22 04 00 02 0f 5c 22 09 01 1f
040: 3f 00 04 00 00 04 00 22 0c 02 06 00 2f 1f 03 03
050: 17 02 00 00 ff 22 08 13 06 00 1f 00 00 00 ff 22
060: 08 23 06 00 1f 00 01 00 ff 1a 06 05 27 00 10 ff
[-- Attachment #3 --]
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 58
000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69
010: 6f 6e 00 33 43 35 36 32 00 45 74 68 65 72 4c 69
020: 6e 6b 20 49 49 49 00 4c 41 4e 2b 4d 6f 64 65 6d
030: 20 50 43 20 43 61 72 64 00 ff
Version = 4.1, Manuf = [3Com Corporation],card vers = [3C562]
Addit. info = [EtherLink III],[LAN+Modem PC Card]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 62 05
PCMCIA ID = 0x101, OEM ID = 0x562
Tuple #4, code = 0x12 (Long link to common memory), length = 4
000: 00 00 00 00
Long link to common memory, address 0x0
Tuple #5, code = 0x1a (Configuration map), length = 6
000: 05 09 80 10 ff 03
Reg len = 2, config register addr = 0x1080, last config = 0x9
Registers: XXXXXXXX XX------
Tuple #6, code = 0x1b (Configuration entry), length = 15
000: c9 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff
Config index = 0x9(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 5.0 x 100 us
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 09 01 71 55 26 26 54
Config index = 0x9
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2 x 100mA
Max current average over 10 ms: 2 x 100mA
Power down supply current: 5 x 1mA
Tuple #8, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #9, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #10, code = 0x10 (Checksum), length = 5
000: 89 ff 80 00 00
Checksum from offset -119, length 128, value is 0x0
Tuple #11, code = 0xff (Terminator), length = 66
000: 13 03 43 49 53 21 02 06 00 1a 06 05 09 80 10 ff
010: 03 1b 0f c9 01 1d 71 55 35 55 54 e0 72 5d 64 30
020: ff ff 1b 07 09 01 71 55 26 26 54 ff 13 03 43 49
030: 53 21 02 02 01 22 04 00 02 0f 5c 22 09 01 1f 3f
040: 00 04
[-- Attachment #4 --]
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 89 05
PCMCIA ID = 0x101, OEM ID = 0x589
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 57
000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69
010: 6f 6e 00 33 43 35 38 39 00 54 50 2f 42 4e 43 20
020: 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20 32 61
030: 00 30 30 30 30 30 32 00 ff
Version = 4.1, Manuf = [3Com Corporation],card vers = [3C589]
Addit. info = [TP/BNC LAN Card Ver. 2a],[000002]
Tuple #6, code = 0x1a (Configuration map), length = 6
000: 02 03 00 00 01 03
Reg len = 3, config register addr = 0x10000, last config = 0x3
Registers: XX------
Tuple #7, code = 0x1b (Configuration entry), length = 15
000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 5.0 x 100 us
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 03 01 71 55 26 26 54
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2 x 100mA
Max current average over 10 ms: 2 x 100mA
Power down supply current: 5 x 1mA
Tuple #9, code = 0x19 (JEDEC descr for attribute memory), length = 3
000: 00 00 ff
Tuple #10, code = 0x14 (No link), length = 0
Tuple #11, code = 0x10 (Checksum), length = 5
000: 89 ff 80 00 00
Checksum from offset -119, length 128, value is 0x0
Tuple #12, code = 0xff (Terminator), length = 218
000: 00 03 00 00 00 00 00 00 43 32 20 54 45 41 4d 2d
010: 45 61 72 6c 20 41 6c 64 72 69 64 67 65 2c 20 52
020: 65 78 20 41 6c 6c 65 72 73 2c 20 52 75 73 73 65
030: 6c 6c 20 43 68 61 6e 67 2c 20 44 61 76 69 64 20
040: 43 68 69 68 2c 20 48 65 72 6d 61 6e 20 4c 61 6f
050: 2c 20 47 65 6e 65 20 4c 69 6e 2c 20 4c 69 61 6e
060: 67 20 4c 69 6e 2c 20 48 69 65 6e 20 4e 67 75 79
070: 65 6e 2c 20 4b 61 70 20 53 6f 68 2c 20 47 61 72
080: 79 20 57 61 6e 67 00 ff ff ff ff ff ff ff ff ff
090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0d0: ff ff ff ff ff ff ff ff ff ff
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199704141318.JAA14216>