Date: Sun, 26 Jul 1998 13:10:53 -0700 From: "Russell L. Carter" <rcarter@pinyon.org> To: hardware@FreeBSD.ORG Subject: 53C810 + Micropolis 3243NT quarrel Message-ID: <199807262010.NAA03721@psf.Pinyon.ORG>
next in thread | raw e-mail | index | archive | help
Hi there (Stefan, probably... :-) I've been trying hard
to get a make world through with the appended configuration,
what appears to be the problem is something up with the
53c810 and a Micropolis 3243 NT. Under heavy disk load,
like building the world or untarring src onto the same
drive I get a hard hang, with the drive light solid on,
and the console message:
ncr0: timeout ccb=f0751c00
I see from the archives that the 3243 sucks big rocks!
My problem looks entertaining because I see no mention
of the "M_DISCONNECT" curiosity.
So is there any voodoo I can do to civilize this drive?
I've got my three fan case all ready to keep it cool...
Cheers,
Russell
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-980520-SNAP #0: Thu May 21 17:29:22 GMT 1998
jkh@bento.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz cost 5300 ns
CPU: Pentium (99.87-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x526 Stepping=6
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 66060288 (64512K bytes)
avail memory = 61370368 (59932K bytes)
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1039 device=5597)> rev 0x02 on pci0.0.0
chip1: <SiS 85c503> rev 0x01 on pci0.1.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0xd0 int a irq 11 on
pci0.1.1
ncr0: <ncr 53c810 fast10 scsi> rev 0x01 int a irq 12 on pci0.9.0
ncr0: waiting for scsi devices to settle
scbus0 at ncr0 bus 0
sd0 at scbus0 target 2 lun 0
sd0: <MICROP 3243NT x43h> type 0 fixed SCSI 2
sd0: Direct-Access
sd0: 10.0 MB/s (100 ns, offset 8)
sd0: M_DISCONNECT received, but datapointer not saved:
data=4b4d94 save=4b56b0 goal=4b56d4.
4095MB (8388315 512 byte sectors)
de0: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 10 on pci0.10.0
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:40:05:50:5e:e6
vga0: <SiS model 0200 VGA-compatible display device> rev 0x65 on pci0.19.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 at 0x378-0x37f on isa
lpt1 not probed due to I/O address conflict with lpt0 at 0x378
mse0 not found at 0x23c
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
bt0 not found at 0x330
uha0 not found at 0x330
aha0 not found at 0x330
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found at 0xffff
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium F00F detected, installing workaround
struct nfsmount bloated (> 512bytes)
Try reducing NFS_MUIDHASHSIZ
changing root device to sd0s1a
WARNING: / was not properly dismounted.
de0: enabling 100baseTX port
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199807262010.NAA03721>