Date: Sun, 22 Feb 1998 11:02:39 +0100 From: Andreas Klemm <andreas@klemm.gtn.com> To: gibbs@plutotech.com Cc: scsi@FreeBSD.ORG Subject: cam driver: Timedout SCP handeled by another timeout Message-ID: <19980222110239.52637@klemm.gtn.com>
index | next in thread | raw e-mail
Hi Justin !
First of all, thanks for your work in the cam driver it really
looks very promising and it solved the write append error with
my TDC 4222, 'though I still don't have amanda running, but
that's another story ;-)
I made the following observations with the cam driver (980103 Snapshot)
on a -current from exactly that date:
On system halt or reboot it happens, that the following
message is printed on the console multiple times:
Timedout SCB handeled by another timeout.
Timedout SCB handeled by another timeout.
Timedout SCB handeled by another timeout.
...
When the system comes up, then about 10 or 20 files will be deleted
from fsck -p. I think these are only tmp files.
My machine is a SMP machine.
I have two SCSI controllers:
T- ahc0 - ID 0 - IBM DORS 32160
ahc0 - ID 4 - TDC 4222
ahc0 - ID 6 - CD-ROM - T
T- ahc1 - ID 1 - IBM DORS 32160 ccd 0
ahc1 - ID 2 - IBM DORS 32160 -T - 3
Here what dmesg tells about my system:
Additionally I have strange problems with my Tandberg SCSI streamer.
mt status only tells one density.
Present Mode: Density = 0x00 Blocksize = 512 bytes
---------available modes---------
Mode 0: Density = 0x00 Blocksize = 512 bytes
Mode 1: Density = 0x00 Blocksize = 512 bytes
Mode 2: Density = 0x00 Blocksize = 512 bytes
Mode 3: Density = 0x00 Blocksize = 512 bytes
Sometimes a dump doesn't finish.
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Wed Feb 18 23:07:53 CET 1998
root@titan.klemm.gtn.com:/home/data/sys.bisdn/compile/BISDNSMP
CPU: Pentium Pro (686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 83886080 (81920K bytes)
avail memory = 78897152 (77048K bytes)
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
vx0: <3COM 3C900 Etherlink XL PCI> rev 0x00 int a irq 19 on pci0.11.0
utp/aui/bnc[*utp*] address 00:60:97:aa:3a:db
vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 18 on pci0.12.0
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 17 on pci0.13.0
ahc0: aic7880 Single Channel, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec 2940 SCSI adapter> rev 0x03 int a irq 16 on pci0.14.0
ahc1: aic7870 Single Channel, SCSI Id=7, 16/255 SCBs
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <4 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 10 maddr 0xd0000 msize 16384 on isa
ed0: address 00:00:c0:5a:98:2a, type WD8013EPC (16 bit)
sio0 at 0x3f8-0x3ff irq 4 flags 0x20 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
mss_probe: no address supplied, try default 0x530
sb_probe: no address supplied, try defaults (0x220,0x240)
pcm0 at 0x220 irq 5 drq 1 flags 0x15 on isa
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
tel0 at 0xd80 irq 9 on isa
tel0: card type Teles S0/16.3
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
joy0 at 0x201 on isa
joy0: joystick
APIC_IO: routing 8254 via 8259 on pin 0
ccd0-3: Concatenated disk drivers
IP packet filtering initialized, divert enabled, default to accept, logging limited to 100 packets/entry
SMP: AP CPU #1 Launched!
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <TANDBERG TDC 4222 =07:> Removable Sequential Access SCSI2 device
sa0: Serial Number SN42200227
sa0: 4.464MB/s transfers (4.464MHz, offset 8)
changing root device to sd0a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI2 device
da0: Serial Number 5U6G6557
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da1 at ahc1 bus 0 target 1 lun 0
da1: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI2 device
da1: Serial Number 5U2N3906
da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da2 at ahc1 bus 0 target 2 lun 0
da2: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI2 device
da2: Serial Number 5U312691
da2: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
WARNING: / was not properly dismounted.
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI2 device
cd0: 10.0MB/s transfers (10.0MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
vx0: selected bnc. (link1)
Assigned: TEI = 0xd9 = 108
(da0:ahc0:0:0:0): tagged openings now 32
(da1:ahc1:0:1:0): tagged openings now 32
(da2:ahc1:0:2:0): tagged openings now 32
(sa0:ahc0:0:4:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0
SEQADDR == 0x8
(sa0:ahc0:0:4:0): Queueing a BDR SCB
(sa0:ahc0:0:4:0): Bus Device Reset Message Sent
Bus Device Reset Completed.
(sa0:ahc0:0:4:0): no longer in timeout
ahc0: Bus Device Reset delivered. 1 SCBs aborted
(sa0:ahc0:0:4:0): REWIND. CDB: 1 1 0 0 0 0
(sa0:ahc0:0:4:0): UNIT ATTENTION asc:29,0
(sa0:ahc0:0:4:0): Power on, reset, or bus device reset occurred
My kernel config file
machine "i386"
cpu "I686_CPU"
ident BISDNSMP
maxusers 64
# SMP Stuff
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
options USER_LDT # for Wine
#Debugging
options DDB
options KTRACE #kernel tracing
options SHOW_BUSYBUFS # busy buffers on shutdown ?
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
# Networking
options INET #InterNETworking
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #print information about dropped packets
options "IPFIREWALL_VERBOSE_LIMIT=100" #limit verbosity
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
options IPDIVERT #divert sockets
# filesystems
options FFS #Berkeley Fast Filesystem
options QUOTA #enable disk quotas
options NFS #Network File System
options MFS #Memory File System
options PROCFS #Process filesystem
options MSDOSFS #MS DOS File System
options "CD9660" #ISO 9660 filesystem
options NSWAPDEV=3 #Allow this many swap-devices.
options FDESC #File descriptor filesystem
options UMAPFS #UID map filesystem
# misc options
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options SYSVSHM,SYSVSEM,SYSVMSG #shared memory (X11)
options "MD5"
options COMPAT_LINUX # Linux Binary compatibility
#options "VM86"
config kernel root on da1
# ISA and PCI BUS support
controller isa0
controller pci0
# PnP Support
controller pnp0
# Floppy Disk Controller
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
# AHA 2940 PCI Controller
controller ahc0
# SCSI Devices
controller scbus0
device da0 # Harddisk 0 - DOS/FreeBSD SMP
device da1 # Harddisk 1 - FreeBSD Boot
device da2 # Harddisk 2 - FreeBSD local
device worm0 at scbus? # SCSI worm
device sa0 # TDC 4222
device cd0 # TOSHIBA XM-5701TA 3136
options AHC_TAGENABLE # tagged command queueing
options AHC_ALLOW_MEMIO
options AHC_SCBPAGING_ENABLE
options SCSI_REPORT_GEOMETRY
# SCO compatible system console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
options MAXCONS=4 # number of virtual consoles
options SC_HISTORY_SIZE=200 # number of history buffer lines
# floating point unit
device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr
# serial devices on mainboard
# `flags' for serial drivers that support consoles (only for sio now):
# 0x10 enable console support for this unit. The other console flags
# are ignored unless this is set. Enabling console support does
# not make the unit the preferred console - boot with -h or set
# the 0x20 flag for that. Currently, at most one unit can have
# console support; the first one (in config file order) with
# this flag set is preferred. Setting this flag for sio0 gives
# the old behaviour.
# 0x20 force this unit to be the console (unless there is another
# higher priority console). This replaces the COMCONSOLE option.
# 0x40 reserve this unit for low level console operations. Do not
#
device sio0 at isa? port "IO_COM1" tty irq 4 flags 0x20 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to DDB,
#if available.
options CONSPEED=38400 #default speed for serial console
#(default 9600)
# parallel device on mainboard
device lpt0 at isa? port? tty irq 7 vector lptintr
# PS/2 mouse on mainboard
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
options "PSM_ACCEL=1" # PS/2 mouse acceleration
# Joystick
device joy0 at isa? port "IO_GAME"
# Network 3COM PCI
device vx0
device ed0 at isa? port 0x280 net irq 10 iomem 0xd0000 vector edintr
# Soundblaster 16
# SoundBlaster DSP driver - for SB, SB Pro, SB16, PAS(emulating SB)
# SoundBlaster 16 DSP driver - for SB16 - requires sb0 device
# SoundBlaster 16 MIDI - for SB16 - requires sb0 device
# Yamaha OPL-2/OPL-3 FM - for SB, SB Pro, SB16, PAS
# controller snd0
# device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr
# device sbxvi0 at isa? port? irq? drq 5 conflicts
# device sbmidi0 at isa? port 0x330 irq? conflicts
# device opl0 at isa? port 0x388 conflicts
# pcm: PCM audio through various sound cards.
device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x15 vector pcmintr
# Pseudo devices
pseudo-device loop
pseudo-device ether
pseudo-device vn 1 #Vnode driver (turns a file into a dev.)
pseudo-device tun 1 #user mode ppp
pseudo-device bpfilter 4 #Berkeley packet filter
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
pseudo-device ccd 4 #Concatenated disk driver
pseudo-device ppp 1 #Point-to-point protocol
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
options PPP_FILTER #enable bpf filtering (needs bpfilter)
# BISDN
options IPI_VJ # Van Jacobsen header compression support
#options "IPI_DIPA=3" # send ip accounting packets every 3 seconds
options TELES_HAS_MEMCPYB # bisdn 0.97
# Teles S0/16.3 ###################################################### IRQ 9 ##
controller tel0 at isa? port 0xd80 net irq 9 vector telintr
pseudo-device disdn
pseudo-device isdn
pseudo-device ipi 4
pseudo-device ispy 4
pseudo-device itel 2
--
Andreas Klemm
powered by ,,symmetric multiprocessor FreeBSD''
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980222110239.52637>