Date: Sun, 9 Jul 2000 11:42:16 +0000 From: Jean-Francois Boisvieux <jfb@penfret.boisvieux.com> To: freebsd-alpha@freebsd.org Cc: pour Ponthieu <jfb@wemsdiet.com> Subject: Problem installing freeBSD on XP1000 Message-ID: <20000709114216.A5076@penfret.boisvieux.com>
next in thread | raw e-mail | index | archive | help
I've an XP1000 (667 Mhz, 512 Mo memory, 4 disk one of which is free) running linux (suse 6.3) quit satisfactorily. The first disk is plan to install freebsd, I've downloaded the last image.iso of free and try to boot with it everithing seems to go nicely execpt that after the apparition of a red screen which (I think) presents options, I have a kernel panic and a reboot with the following message "panic going nowhere without my init" I'am aware of the scsi hose problem and I've installed my scsi controller on upper PCI slots. I've tried to find info and I can't find anything useful. I've also tried to boot netbsd but then it says that it sees only 1 disk which prevent me to go further since I don't want to break my linux installation can you help or give me pointer since I'm sure that free runs on xp1000, and I want to use it as a server. Thanks for help -- in case I join you the linux dmesg ___ BEGIN LOG : 65536 (order 6, 512k) POSIX conformance testing by UNIFIX Alpha PCI BIOS32 revision 0.04 PCI: Probing PCI hardware SMC37c669 Super I/O Controller found @ 0x3f0 Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 524288 bhash 65536) Starting kswapd v 1.5 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 hda: Compaq CRD-8322B, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Floppy drive(s): fd0 is 2.88M FDC 0 is a post-1991 82077 sym53c8xx: at PCI bus 0, device 12, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c895 detected sym53c895-0: rev=0x01, base=0xe020000, io_port=0x8800, irq=36 sym53c895-0: NCR clock is 40037KHz, 40218KHz sym53c895-0: ID 7, Fast-40, Parity Checking sym53c895-0: on-chip RAM at 0xe021000 sym53c895-0: restart (scsi reset). sym53c895-0: Downloading SCSI SCRIPTS. sym53c895-0: SCSI bus mode change from 80 to 80. sym53c895-0: restart (scsi mode change). sym53c895-0: Downloading SCSI SCRIPTS. ncr53c8xx: at PCI bus 0, device 12, function 0 ncr53c8xx: IO region 0x8800 to 0x887f is in use scsi0 : sym53c8xx - version 1.3g scsi1 : SCSI host adapter emulation for IDE ATAPI devices scsi : 2 hosts. Vendor: COMPAQ Model: BD009222C7 Rev: B016 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: SEAGATE Model: ST39102LW Rev: 8320 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Vendor: SEAGATE Model: ST39102LW Rev: 8320 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdc at scsi0, channel 0, id 3, lun 0 Vendor: SEAGATE Model: ST318203LW Rev: 0002 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdd at scsi0, channel 0, id 4, lun 0 sym53c895-0-<0,0>: tagged command queue depth set to 8 sym53c895-0-<1,0>: tagged command queue depth set to 8 sym53c895-0-<3,0>: tagged command queue depth set to 8 sym53c895-0-<4,0>: tagged command queue depth set to 8 Vendor: COMPAQ Model: CRD-8322B Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 Vendor: COMPAQ Model: CRD-8322B Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 1 Vendor: COMPAQ Model: CRD-8322B Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr2 at scsi1, channel 0, id 0, lun 2 Vendor: COMPAQ Model: CRD-8322B Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr3 at scsi1, channel 0, id 0, lun 3 Vendor: COMPAQ Model: CRD-8322B Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr4 at scsi1, channel 0, id 0, lun 4 Vendor: COMPAQ Model: CRD-8322B Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr5 at scsi1, channel 0, id 0, lun 5 Vendor: COMPAQ Model: CRD-8322B Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr6 at scsi1, channel 0, id 0, lun 6 Vendor: COMPAQ Model: CRD-8322B Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr7 at scsi1, channel 0, id 0, lun 7 scsi : detected 8 SCSI cdroms 4 SCSI disks total. sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray Uniform CDROM driver Revision: 2.56 sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray sr2: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray sr3: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray sr4: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray sr5: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray sr6: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray sr7: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray sda: Spinning up disk...<6>sym53c895-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 31) ....................ready SCSI device sda: hdwr sector= 512 bytes. Sectors= 17773524 [8678 MB] [8.7 GB] sym53c895-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] sym53c895-0-<3,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdc: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] sym53c895-0-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdd: hdwr sector= 512 bytes. Sectors= 35566480 [17366 MB] [17.4 GB] 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html eth0: 3Com 3c905B Cyclone 100baseTx at 0x10000a000, 00:10:5a:64:69:b1, IRQ 28 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 786d. MII transceiver found at address 0, status 786d. Enabling bus-master transmits and whole-frame receives. tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov eth1: Digital DS21143 Tulip rev 65 at 0x100009000, 00:00:F8:71:59:0B, IRQ 45. eth1: EEPROM default media type Autosense. eth1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. eth1: Index #1 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block. eth1: Index #2 - Media AUI (#2) described by a 21142 Serial PHY (2) block. eth1: Index #3 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) block. eth1: Index #4 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. eth1: Index #5 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4) block. Partition check: sda: sda1 sda2 sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdc: sdc1 sdc2 sdc3 sdd: sdd1 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 152k freed Adding Swap: 1023984k swap-space (priority -1) <sc 224(3ffc00041e0,3ffc0000ad0,f)><sc 224(3ffc00042a0,3ffc0000ad0,f)><sc 224(3ffc0004360,3ffc0000ad0,f)><sc 224(3ffc00044e0,3ffc0000ad0,f)><sc 224(3ffc0004660,3ffc0000ad0,f)><sc 224(3ffc00047e0,3ffc0000ad0,f)><sc 224(3ffc0004960,3ffc0000ad0,f)><sc 224(3ffc0004ae0,3ffc0000ad0,f)><sc 224(3ffc0004c60,3ffc0000ad0,f)><sc 224(3ffc0004de0,3ffc0000ad0,f)><sc 224(3ffc0004ea0,3ffc0000ad0,f)><sc 224(3ffc0005080,3ffc0000ad0,f)><sc 224(3ffc0005200,3ffc0000ad0,f)>set_program_attributes(12000000 d8c000 14000000 46ad10) <sc 0(84,64,11ffff710)><sc 53(8,64,11ffff710)><sc 0(17,521c,11ffff710)><sc 53(8,521c,11ffff710)><sc 224(3ffc00041e0,3ffc0000ad0,f)><sc 224(3ffc00042a0,3ffc0000ad0,f)><sc 224(3ffc0004360,3ffc0000ad0,f)><sc 224(3ffc00044e0,3ffc0000ad0,f)><sc 224(3ffc0004660,3ffc0000ad0,f)><sc 224(3ffc00047e0,3ffc0000ad0,f)><sc 224(3ffc0004960,3ffc0000ad0,f)><sc 224(3ffc0004ae0,3ffc0000ad0,f)><sc 224(3ffc0004c60,3ffc0000ad0,f)><sc 224(3ffc0004de0,3ffc0000ad0,f)><sc 224(3ffc0004ea0,3ffc0000ad0,f)><sc 224(3ffc0005080,3ffc0000ad0,f)><sc 224(3ffc0005200,3ffc0000ad0,f)>set_program_attributes(12000000 d8c000 14000000 46ad10) <sc 0(84,64,11ffff718)><sc 53(8,64,11ffff718)><sc 0(17,521c,11ffff718)><sc 53(8,521c,11ffff718)><sc 224(11fffdcd0,3ffc0000ad0,132c0)><sc 224(146f97c0,3ffc0000ad0,132c0)><sc 224(146f97c0,3ffc0000ad0,132c0)><sc 224(146f97c0,3ffc0000ad0,132c0)><sc 224(146f9880,3ffc0000ad0,132c0)><sc 224(146f9880,3ffc0000ad0,132c0)><sc 224(14761a80,3ffc0000ad0,132c0)><sc 224(11fffcb70,3ffc0000ad0,132c0)><sc 0(a0,11fffd668,11fffd488)><sc 0(a0,11fffc6c8,11fffc4e8)> --- END LOG thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000709114216.A5076>