Date: Sun, 14 May 2000 05:40:05 -0700 (PDT) From: Brian Candler <B.Candler@pobox.com> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/18536: ex0 driver seems not to initialise 82595FX card reliably Message-ID: <200005141240.FAA31269@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/18536; it has been noted by GNATS.
From: Brian Candler <B.Candler@pobox.com>
To: freebsd-gnats-submit@FreeBSD.org, B.Candler@pobox.com
Cc:
Subject: Re: kern/18536: ex0 driver seems not to initialise 82595FX card reliably
Date: Sun, 14 May 2000 13:34:00 +0100
FYI: I have now merged in dev/ex/* from FreeBSD-current, updated
conf/files to reflect the new file
if_ex_isa.c, recompiled, and it still does the same:
13:31:37.884399 B 0:a0:c9:12:51:b8 sap 12 > Broadcast sap c9 I
(s=40,r=92,P) len=42
0806 0001 0800 0604 0001 00a0 c912 51b8
d4f0 c2a2 0000 0000 0000 d4f0 c2ae 7e7e
7e7e 7e7e 7e7e 7e7e 7e7e
13:31:38.884763 B 0:a0:c9:12:51:b8 sap 12 > Broadcast sap c9 I
(s=40,r=92,P) len=42
0806 0001 0800 0604 0001 00a0 c912 51b8
d4f0 c2a2 0000 0000 0000 d4f0 c2ae 7e7e
7e7e 7e7e 7e7e 7e7e 7e7e
13:31:39.894420 B 0:a0:c9:12:51:b8 sap 12 > Broadcast sap c9 I
(s=40,r=92,P) len=42
0806 0001 0800 0604 0001 00a0 c912 51b8
d4f0 c2a2 0000 0000 0000 d4f0 c2ae 7e7e
7e7e 7e7e 7e7e 7e7e 7e7e
Here is the output of 'dmesg' after a 'boot -v'.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-RELEASE #4: Sun May 14 14:19:47 BST 2000
root@karma.linnet.org:/usr/src/sys/compile/KARMA
Calibrating clock(s) ... i8254 clock: 1193673 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Am5x86 Write-Through (486-class CPU)
Origin = "AuthenticAMD" Id = 0x4e4 Stepping = 4
Features=0x1<FPU>
real memory = 33554432 (32768K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0035d000 - 0x01ff7fff, 29995008 bytes (7323 pages)
config> di psm0
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 29315072 (28628K bytes)
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0344000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03440a8.
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0xffffffff
pci_open(2): mode 2 enable port (0x0cf8) is 0xff
npx0: <math processor> on motherboard
npx0: INT 16 interface
isa0: <ISA bus> on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
ex: Found card at 0x210!
ex: Adding board at 0x210, irq 9
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: ECP SPP ECP+EPP SPP
ppc_detect_fifo: PWord not supported
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
ex: ex_isa_probe() found card at 0x210
ex0: <Intel Pro/10+> at port 0x210-0x21f irq 9 on isa0
ex0: Manual config, 16-bit bus, board id 0x202, stepping 0x0
ex0: Ethernet address 00:a0:c9:12:51:b8
bpf: ex0 attached
isa_probe_children: probing PnP devices
BIOS Geometries:
0:026c7f3f 0..620=621 cylinders, 0..127=128 heads, 1..63=63 sectors
1:01300311 0..304=305 cylinders, 0..3=4 heads, 1..17=17 sectors
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 40084040, tty 4003009a, net 4007029a
bpf: lo0 attached
ad0: <FUJITSU M1638TAU/5044> ATA-0 disk at ata0 as master
ad0: 2452MB (5021856 sectors), 4982 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, BIOSPIO
ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0
Creating DISK ad0
Creating DISK wd0
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x6, start 63, end = 161279, size 161217 : OK
ad0s2: type 0xa5, start 161280, end = 5015807, size 4854528 : OK
start_init: trying /sbin/init
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200005141240.FAA31269>