Date: Sun, 3 Dec 2000 11:27:00 -0500 From: Barry Lustig <barry@lustig.com> To: gerti-freebsds@BITart.com Cc: stable@freebsd.org, mobile@freebsd.org Subject: Re: Boot problem with 4.2-STABLE on VAIO z505-LE Message-ID: <20001203162701.10239.qmail@devious.lustig.com> In-Reply-To: <20001202154922.8753.qmail@camelot.bitart.com> References: <20001201211336.8019.qmail@devious.lustig.com> <20001202154922.8753.qmail@camelot.bitart.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 2 Dec 2000, Gerd Knops wrote: > Looks like the Sony USB Memory Stick Slot is causing trouble. I have an > external USB Memory Stick Adapter working just fine, no idea why the > internal one is failing. Do you happen to have a memory stick in there? > I've done a bit more research on this. The problem is with the USB floppy drive. The 4.2-RELEASE generic kernel has no problems probing for it (it works with the floppy attached or unattached at boot). I tried removing "device umass" from the kernel config file and loading umass via kldload. That works. I then tried adding a umass_load="YES" to /boot/loader.conf, that also works. It won't work though, when I compile it into the kernel. barry > ok boot -v > SMAP type=01 base=00000000 00000000 len=00000000 0009f800 > SMAP type=02 base=00000000 0009f800 len=00000000 00000800 > SMAP type=02 base=00000000 000e8400 len=00000000 00017c00 > SMAP type=01 base=00000000 00100000 len=00000000 0bef0000 > SMAP type=03 base=00000000 0bff0000 len=00000000 0000f800 > SMAP type=04 base=00000000 0bfff800 len=00000000 00000800 > SMAP type=02 base=00000000 fff80000 len=00000000 00080000 > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 The Regents of the University of California. All rights > reserved. FreeBSD 4.2-STABLE #7: Fri Dec 1 14:08:28 EST 2000 > barry@vaio.lustig.com:/usr/src/sys/compile/VAIO > Calibrating clock(s) ... TSC clock: 645193534 Hz, i8254 clock: > 1193167 Hz CLK_USE_I8254_CALIBRATION not specified - using default > frequency Timecounter "i8254" frequency 1193182 Hz > CLK_USE_TSC_CALIBRATION not specified - using old calibration method > CPU: Pentium III/Pentium III Xeon/Celeron (645.21-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x683 Stepping = 3 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 201261056 (196544K bytes) Physical memory chunk(s): > 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00408000 - 0x0bfe7fff, > 197001216 bytes (48096 pages) avail memory = 191856640 (187360K bytes) > bios32: Found BIOS32 Service Directory header at 0xc00f6c10 > bios32: Entry = 0xfd890 (c00fd890) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0x11e > pnpbios: Found PnP BIOS data at 0xc00f6c40 > pnpbios: Entry = f0000:b431 Rev = 1.0 > pnpbios: Event flag at 400 > Other BIOS signatures found: > ACPI: 000f6bb0 > Preloaded elf kernel "kernel" at 0xc03e2000. > Pentium Pro MTRR support enabled > md0: Malloc disk > Creating DISK md0 > Math emulator present > pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) > apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected > at v1.2 npx0: <math processor> on motherboard > npx0: INT 16 interface > pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard > found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, > hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 > map[10]: type 1, range 32, base 40000000, size 24 > found-> vendor=0x8086, dev=0x7191, revid=0x03 > class=06-04-00, hdrtype=0x01, mfdev=0 > subordinatebus=1 secondarybus=1 > found-> vendor=0x8086, dev=0x7110, revid=0x02 > class=06-01-00, hdrtype=0x00, mfdev=1 > subordinatebus=0 secondarybus=0 > found-> vendor=0x8086, dev=0x7111, revid=0x01 > class=01-01-80, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > map[20]: type 1, range 32, base 0000fc90, size 4 > found-> vendor=0x8086, dev=0x7112, revid=0x01 > class=0c-03-00, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=d, irq=9 > map[20]: type 1, range 32, base 0000fca0, size 5 > found-> vendor=0x8086, dev=0x7113, revid=0x03 > class=06-80-00, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > map[90]: type 1, range 32, base 00001040, size 4 > found-> vendor=0x104d, dev=0x8039, revid=0x02 > class=0c-00-10, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=a, irq=9 > map[10]: type 1, range 32, base fedf7000, size 11 > map[14]: type 1, range 32, base fedf7c00, size 9 > found-> vendor=0x1073, dev=0x0010, revid=0x02 > class=04-01-00, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=a, irq=9 > map[10]: type 1, range 32, base fedf8000, size 15 > map[14]: type 1, range 32, base 0000fcc0, size 6 > map[18]: type 3, range 32, base 0000fc8c, size 2 > found-> vendor=0x14f1, dev=0x2443, revid=0x01 > class=07-80-00, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=a, irq=9 > map[10]: type 1, range 32, base fede0000, size 16 > map[14]: type 3, range 32, base 0000fc38, size 3 > found-> vendor=0x8086, dev=0x1229, revid=0x08 > class=02-00-00, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=a, irq=9 > map[10]: type 1, range 32, base fedf6000, size 12 > map[14]: type 1, range 32, base 0000fc40, size 6 > map[18]: type 1, range 32, base fec00000, size 20 > found-> vendor=0x1180, dev=0x0475, revid=0x80 > class=06-07-00, hdrtype=0x02, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=a, irq=255 > pci0: <PCI bus> on pcib0 > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on > pci0 found-> vendor=0x1002, dev=0x4c4d, revid=0x64 > class=03-00-00, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=a, irq=9 > map[10]: type 1, range 32, base fd000000, size 24 > map[14]: type 1, range 32, base 0000e800, size 8 > map[18]: type 1, range 32, base febff000, size 12 > pci1: <PCI bus> on pcib1 > pci1: <ATI Mobility-1 graphics accelerator> (vendor=0x1002, > dev=0x4c4d) at 0.0 irq 9 isab0: <Intel 82371AB PCI to ISA bridge> at > device 7.0 on pci0 isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device > 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfc90 > ata0: mask=03 status0=50 status1=00 > ata0: mask=03 ostat0=50 ostat2=00 > ata0-master: ATAPI probe a=00 b=00 > ata0-slave: ATAPI probe a=00 b=00 > ata0: mask=03 status0=50 status1=00 > ata0-master: ATA probe a=01 b=a5 > ata0: devices=01 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfc98 > ata1: mask=03 status0=00 status1=00 > ata1: mask=03 ostat0=00 ostat2=00 > ata1-master: ATAPI probe a=00 b=00 > ata1-slave: ATAPI probe a=00 b=00 > ata1: mask=03 status0=00 status1=00 > ata1: devices=00 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf > irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB > controller> on uhci0 usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhub1: Philips Semiconductors product 0x1122, class 9/0, rev > 1.10/1.10, addr 2 uhub1: 3 ports with 3 removable, self powered > umass0: Sony USB Memory Stick Slot, rev 1.10/1.31, addr 3 > umass0:0:0:-1: Attached to scbus0 as device 0 > intpm0: <Intel 82371AB Power management controller> port > 0x1040-0x104f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 1040 > intpm0: intr IRQ 9 enabled revision 0 > using shared irq9. > smbus0: <System Management Bus> on intsmb0 > smb0: <SMBus general purpose I/O> on smbus0 > intpm0: PM I/O mapped 8000 > chip1: <Sony CXD3222 FireWire Host Controller> mem > 0xfedf7c00-0xfedf7dff,0xfedf7000-0xfedf77ff irq 9 at device 8.0 on > pci0 pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff > mem 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0 ds1: setmap > (1000, 3de4), nseg=1, error=0 pcm0: ac97 codec id 0x414b4d02 > pcm0: ac97 codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit > master volume, AKM 3D Audio pcm0: ac97 primary codec extended > features AMAP pcm: setmap 11000, 1000; 0xc9dbe000 -> 11000 > pcm: setmap 21000, 1000; 0xc9dce000 -> 21000 > pcm: setmap 31000, 1000; 0xc9dde000 -> 31000 > pcm: setmap 41000, 1000; 0xc9dee000 -> 41000 > pcm: setmap 51000, 1000; 0xc9dfe000 -> 51000 > pcm: setmap 61000, 1000; 0xc9e0e000 -> 61000 > pci0: <unknown card> (vendor=0x14f1, dev=0x2443) at 10.0 irq 9 > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfc40-0xfc7f mem > 0xfec00000-0xfecfffff,0xfedf6000-0xfedf6fff irq 9 at device 11.0 on > pci0 fxp0: Ethernet address 08:00:46:0d:8b:a9 > bpf: fxp0 attached > pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 12.0 on pci0 > pcic-pci0: Legacy address set to 0x3e0 > PCI Config space: > 00: 04751180 02100007 06070080 00020000 > 10: 00000000 020000dc 00000000 00000000 > 20: 00000000 00000000 00000000 00000000 > 30: 00000000 00000000 00000000 078001ff > 40: 8082104d 000003e1 00000000 00000000 > 50: 00000000 00000000 00000000 00000000 > 60: 00000000 00000000 00000000 00000000 > 70: 00000000 00000000 00000000 00000000 > 80: 00020001 00000000 04630463 30000000 > 90: 00000000 00000000 00000000 00000000 > Cardbus Socket registers: > 00: f000ff53: f000ff53: f000e2c3: f000ff53: > 10: f000ff53: f000ff54: f000a1af: f000ff53: > ExCa registers: > 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 > 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe > 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e > 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 > Trying Read_Port at 203 > Trying Read_Port at 243 > Trying Read_Port at 283 > Trying Read_Port at 2c3 > Trying Read_Port at 303 > Trying Read_Port at 343 > Trying Read_Port at 383 > Trying Read_Port at 3c3 > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > fdc0: direction bit not set > fdc0: cmd 3 failed at out byte 1 of 3 > fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbdc: RESET_KBD return code:00fa > kbdc: RESET_KBD status:00aa > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 > psm0: current command byte:0047 > kbdc: TEST_AUX_PORT status:0000 > kbdc: RESET_AUX return code:00fa > kbdc: RESET_AUX status:00aa > kbdc: RESET_AUX ID:0000 > psm: status 00 02 64 > psm: status 00 00 64 > psm: status 00 03 64 > psm: status 00 03 64 > psm: data 08 00 00 > psm: status 73 02 0a > psm: data 08 00 00 > psm: status 00 02 64 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model GlidePoint, device ID 0-00, 2 buttons > psm0: config:00000000, flags:00000000, packet size:3 > psm0: syncmask:c0, syncbits:00 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f > fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 > fb0: init mode:24, bios mode:3, current mode:24 > fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k > vga0: vga: WARNING: video mode switching is not fully supported on > this adapter VGA parameters upon power-up > 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 > b4 1f 00 4f 0d 0e 00 00 01 e0 91 87 8f 28 1f 8f > b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > VGA parameters in BIOS for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > EGA/VGA parameters to be used for mode 24 > 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 > b4 1f 00 4f 0d 0e 00 00 01 e0 91 87 8f 28 1f 8f > b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x100> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > pcic0: <Intel i82365> at port 0x3e0 iomem 0xd4000 irq 10 on isa0 > pcic0: management irq 10 > stat is 33 > pccard0: <PC Card bus -- kludge version> on pcic0 > pcic1: not probed (disabled) > sio0: irq maps: 0x1 0x11 0x1 0x1 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > isa_probe_children: probing PnP devices > BIOS Geometries: > 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors > 0 accounted for > Device configuration finished. > bpf: lo0 attached > bpf: ppp0 attached > new masks: bio 68c200, tty 631212, net 671212 > bpf: sl0 attached > bpf: faith0 attached > bpf: gif0 attached > bpf: gif1 attached > bpf: gif2 attached > bpf: gif3 attached > BRIDGE 990810, have 9 interfaces > -- index 1 type 6 phy 0 addrl 6 addr 08.00.46.0d.8b.a9 > IPsec: Initialized Security Association Processing. > ata0-master: success setting UDMA2 on PIIX4 chip > Creating DISK ad0 > Creating DISK wd0 > ad0: <FUJITSU MHK2120AT/D834> ATA-5 disk at ata0-master > ad0: 11513MB (23579136 sectors), 23392 cyls, 16 heads, 63 S/T, 512 > B/S ad0: 16 secs/int, 1 depth queue, UDMA33 > ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 > ad0: 11513MB <FUJITSU MHK2120AT> [23392/16/63] at ata0-master UDMA33 > panic: rcmdlen = -1070593560 < 12, buffer too small > > syncing disks... > > > > CONFIGURATION FILE: > > barry@gate$ cat VAIO > > $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20 2000/10/31 > 23:16:07 n_hibma Exp $ > > machine i386 > cpu I586_CPU > cpu I686_CPU > ident VAIO > maxusers 64 > > makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options INET6 #IPv6 communications protocols options FFS #Berkeley > Fast Filesystem options FFS_ROOT #FFS usable as root device [keep > this!] options SOFTUPDATES #Enable FFS soft updates support options > MFS #Memory Filesystem options MD_ROOT #MD is a potential root device > options NFS #Network Filesystem options NFS_ROOT #NFS usable as root > device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 > ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, > CD9660 required options PROCFS #Process filesystem options COMPAT_43 > Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay > (in ms) before probing SCSI options UCONSOLE #Allow users to grab the > console options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options P1003_1B #Posix P1003_1B real-time extensions options > _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad > replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev > options IPSEC #IP security options IPSEC_ESP #IP security (crypto; > define w/ IPSEC) options INVARIANT_SUPPORT > options INVARIANTS > options DDB > options DDB_UNATTENDED > options BREAK_TO_DEBUGGER > options BRIDGE #For vmware > > To make an SMP kernel, the next two are needed > options SMP # Symmetric MultiProcessor Kernel options APIC_IO # > Symmetric (APIC) I/O > > device isa > device eisa > device pci > > Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > > ATA and ATAPI devices > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering > options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > > SCSI peripherals (needed for USB umass driver) > device scbus # SCSI bus (required) > device da # Direct Access (disks) > device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct SCSI access) > > atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > splash screen/screen saver > pseudo-device splash > > syscons is the default console driver, resembling an SCO console > device sc0 at isa? flags 0x100 > options SC_PIXEL_MODE > options SC_NORM_ATTR="(FG_LIGHTGREY|BG_BLACK)" > options SC_NORM_REV_ATTR="(FG_BLACK|BG_LIGHTGREY)" > options SC_KERNEL_CONS_ATTR="(FG_WHITE|BG_RED)" > options SC_KERNEL_CONS_REV_ATTR="(FG_RED|BG_BLACK)" > > Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > Power management support (see LINT for more options) > device apm0 at nexus? flags 0x20 # Advanced Power Management > > PCCARD (PCMCIA) support > device card > device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd4000 > device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable > > Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > > device fxp # Intel EtherExpress PRO/100B (82557, 82558) device wi > device an > > Pseudo devices - the number indicates how many units to allocated. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > pseudo-device sl 1 # Kernel SLIP > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > pseudo-device gif 4 # IPv6 and IPv4 tunneling > pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > > The `bpf' pseudo-device enables the Berkeley Packet Filter. > Be aware of the administrative consequences of enabling this! > pseudo-device bpf #Berkeley packet filter > > USB support > device uhci # UHCI PCI->USB interface > device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > device ugen # Generic > device uhid # "Human Interface Devices" > device ukbd # Keyboard > device ulpt # Printer > device umass # Disks/Mass storage - Requires scbus and da device ums > Mouse device uscanner # Scanners > > > SMB bus > > System Management Bus support provided by the 'smbus' device. > > Supported devices: > smb standard io > > Supported interfaces: > iicsmb I2C to SMB bridge with any iicbus interface > bktr brooktree848 I2C hardware interface > intpm Intel PIIX4 Power Management Unit > alpm Acer Aladdin-IV/V/Pro2 Power Management Unit > > device smbus # Bus support, required for smb below. device intpm > device alpm > > device smb > > device iicbus #Bus support, required for ic/iic/iicsmb below. device > iicbb device ic > device iic > device iicsmb # smb over i2c bridge > > pcm: Luigi's sound driver > device pcm > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001203162701.10239.qmail>