Skip site navigation (1)Skip section navigation (2) 
Date:      Sun, 17 Dec 2000 00:56:13 -0800
From:      "Shon Smith" <shonthomas@earthlink.net>
To:        <freebsd-questions@FreeBSD.ORG>
Subject:   Config / Support for PCI ethernet device
Message-ID:  <001001c06807$352a5380$0200a8c0@beckett>
index | next in thread | raw e-mail 

[-- Attachment #1 --]
Hello,
I've read that my PCI  ethernet card is supposed to be supported.  I have
the Netgear FA311TX PCI Adapter.  I am trying to rebuild the kernel in order
to support the PCI card, but on the configuration file (where you are
supposed to un-comment out the name of your device prior to rebuilding the
kernel) I can't find the name of my device.
The question is:  How do I add support for my PCI card?

any help is much appreciated.
shon

In case it helps, the output of dmesg is below:

____________________________________________________________________________
____________________________

Last login: Sat Dec 16 18:27:43 2000 from 192.168.0.2
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 4.2-RELEASE (NIETZSCHE) #0: Sun Dec 17 00:42:53 PST 2000

Budda at the console.
stsmith /usr/home/stsmith-->su
Password:
nietzsche# dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Sun Dec 17 00:42:53 PST 2000
    stsmith@nietzsche.earthlink.net:/usr/obj/usr/src/sys/NIETZSCHE
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 534548291 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (534.55-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5

Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
real memory  = 134135808 (130992K bytes)
avail memory = 127770624 (124776K bytes)
Preloaded elf kernel "kernel" at 0xc02c6000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8605)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 5
pci0: <VIA 83C572 USB controller> at 4.3 irq 5
sio0: <3COM PCI FaxModem> port 0xb800-0xb807 irq 10 at device 14.0 on pci0
sio0: moving to sio4
sio4: type 16550A
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb400-0xb47f mem
0xdf800000-0xdf80007f irq 12 at device 15.0 on pci0
xl0: command never completed!
xl0: command never completed!
xl0: Ethernet address: 00:01:03:1f:71:8b
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x100b, dev=0x0020) at 16.0 irq 5
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ad0: 9797MB <QUANTUM FIREBALLP LM10.2> [19906/16/63] at ata0-master UDMA66
acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s1a


[-- Attachment #2 --]
x>"
IPM.Microsoft Mail.Note1
8,l*#&)+.6p%win modem drivers support on freebsdqc$=XԑxͰSMTP:SHONTHOMAS@EARTHLINK.NET@F-h
K̠W€<^@eHELLO,IVEREADTHATMYPCIETHERNETCARDISSUPPOSEDTOBESUPPORTEDIHAVETHENETGEARFA311TXPCIADAPTERIAMTRYINGTO			MLZFu/d
rcpg1252`n033Och
set0 }
i ;	o0
vIwkd4`cPcA Hel	,

I've ad t@my PCI  0h0 c  suppo qo b s 	.@0qtgPFA311TXAda0amrygbur k  e, u@ nfigp-i"1"l (w{ y`$zun-m0"n of$2@c px37)n'@"&k'Tq
Ps#3:@Hoddp ?plp2mhc0sh 0
I w0@1s!&1p"'dPA0	w-0
_789:;=_0
L40@	^g-@D 16@ 8:27:43 A#pa@ 92.@08.0.'PPpygh@(c)A80!UC3C6C8C9C91DD9@F,Re0 'U4p'C@a~AP0B  r2vF	BSD 4B -RELEASE#NIETZSCHE)#0?3%?7 A@2:b5@PST@0
Bu.Pa "s7,2Gm4p1/uXsr/3/R5-->pP40 n:0z#5BOCSA-@,KjP`jt2B7n9CCD8ZE2EFGHIJ/K?LJMN^R5@Ug.Ipnk.:RXobjRRcS@ys/M,5q%Q "i804"@Pe,nc]@`2 zklTM`{lf@4llEn7CPU-P%iuII/r Xe \/C@"1(p.P55-Mn@ A6%`q)^fOB=lG	35llIpv0x665@S2v5^fFPtpF=x0@`3f9 <Fq,VME,D{pO@{po,R{A{pMC{pCXDХLP|0TR|aG|A|MOV|qT{3DpMMX,FX|P>A `[@v1p 5[@8# 0WK ysuPpg@ p0624p 6<Y6`@'e"dlx0c02c6A2rY} 	#1m	=-M@	@(skUpxe<R'Qr>""`rINO`@1UQfep2 b_-?bd/CRCf #.=P'u=D`05)'1B51ANV0`PVp_0n 	0h
 'sҚ!irqmVIA lCt-ISxL@=qs0eE~AxP"sђ x0d[@0-'q[1e10"15כQ@xpcj3C5``SBLAyUO_oc@гo@OBMFaxMqmb$ePyO`@D^U-`px`50AxlAa3cE 5C-?ErisPLH4+af!ARQn y5.%pp`ǒP0	!s.Ab-q-e0PP:0:7P80$i`RMs1ukyvq@M Ѡ 0$`WΤ;,b41~-FD`*a":o0bs%kn-4 zqa!'zaA)@0yPRϒߐfp BEC x`u0 tzBz5,Rtqn TOFIFO!ЁSb3Oᶍ-K3tpl̰`eЉkb$Key#l0fD`6hvgsVGA㻈 0Sâp4b  ,-ÑQUSg ړ-1@@@ uQQU4za0ŷ8=ӾϷq2#@ΛQO`eZ7M<QUAU``LBALLP LM@B [E6/@0/63]PҬ-cq
UDM0ecCDRQ<TOxSHI
LpQXM-6@2BS2	r`^dl12sA4uib/1s1a0
B F F FR% FT8.5& F/ F0 F2 FA F6B F7C F8ǀ Fɀ F F FK̠WK̠Wz8+*VPSTPRX.DLLNITA7nC:\Program Files\Microsoft Office\Office\Personal Folders(1).pst
471000000004BA6CCA0ABF3D311911100CC57C1000004522300Hp
help

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001001c06807$352a5380$0200a8c0>