Date: Sun, 15 Jul 2001 16:24:55 +0200 (CEST) From: Administrator IPA <administrator@klima.physik.uni-mainz.de> To: FUJITA Kazutoshi <fujita@soum.co.jp> Cc: <freebsd-smp@FreeBSD.ORG> Subject: Re: SMP kernel hungs up on ASUS CUV4X-D Message-ID: <Pine.BSF.4.33.0107151621470.17342-200000@klima.physik.uni-mainz.de> In-Reply-To: <20010714095232C.fujita@soum.co.jp>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
On Sat, 14 Jul 2001, FUJITA Kazutoshi wrote:
Hello. Just read this today, hope the problem has been solved.
we also use such a mainboard with two 800EB CPUs and we also use
a TYAN 2500 mainboard. As with the cvsupdate from around July, 1st,
SMP got some kind 'flaky' status and it crashed not even on this
specific maonboard, for instance at our institute on __ALL__ SMP
boxes (and each one has a different main PCB.
This problem seems to be solved with now and all systems run
'stable'. The only thing we did in the kernel configs was: remove
the MFS filesystem and doing some tweakings with default data and
textsegemnt size as recommended in a prior thread ...
> Hi, smp people.
>
> I've got ASUS CUVX-D motherboard (VIA 694XDP Chipset) which has
> dual Socket 370.
>
> I tried 4.3-STABLE(cvsuped Jul 13) SMP kernel, but often hungs up.
> It does not accept keyboard, mouse and network input or connection.
> I have no messages in log(such as /var/log/messages).
>
> I also tried with 5.0-CURRENT, but the result was same.
>
> Any suggestions ?
>
>
> Regards,
>
--
MfG
O. Hartmann
ohartman@klima.physik.uni-mainz.de
----------------------------------------------------------------
IT-Administration des Institut fuer Physik der Atmosphaere (IPA)
----------------------------------------------------------------
Johannes Gutenberg Universitaet Mainz
Becherweg 21
55099 Mainz
Tel: +496131/3924662 (Maschinensaal)
Tel: +496131/3924144
FAX: +496131/3923532
[-- Attachment #2 --]
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f54d0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x7d
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f50c4
signature: 'PCMP'
base table length: 276
version: 1.4
checksum: 0x8e
OEM ID: 'OEM00000'
Product ID: 'PROD00000000'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 26
local APIC address: 0xfee00000
extended table length: 124
extended table checksum: 167
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
3 0x11 BSP, usable 6 8 6 0x387fbff
0 0x11 AP, usable 6 8 6 0x387fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 2 0 2 0
INT conforms conforms 2 1 2 1
INT conforms conforms 2 0 2 2
INT conforms conforms 2 3 2 3
INT conforms conforms 2 4 2 4
INT conforms conforms 2 6 2 6
INT conforms conforms 2 7 2 7
INT conforms conforms 2 8 2 8
INT conforms conforms 2 12 2 12
INT conforms conforms 2 14 2 14
INT conforms conforms 2 15 2 15
INT active-lo level 1 0:A 2 16
INT active-lo level 2 0 2 0
INT active-lo level 0 4:D 2 18
INT active-lo level 0 9:A 2 19
INT active-lo level 0 10:A 2 18
INT active-lo level 0 11:A 2 17
INT active-lo level 0 13:A 2 19
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 2 0 255 0
NMI active-hi edge 2 0 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x20000000
address range: 0xcfec0000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0xefec0000
address range: 0xf8140000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xe8000000
address range: 0x18000000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
Bus Heirarchy
bus ID: 2 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
-------------------------------------------------------------------------------
dmesg output:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Fri Jul 13 18:37:05 JST 2001
fujita@vanilla.soum.co.jp:/usr/obj/usr/src/sys/VANILLA
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1004.52-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
sio0: gdb debugging port
avail memory = 518193152 (506048K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc046a000.
ccd0-3: Concatenated disk drivers
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 18 -> irq 2
IOAPIC #0 intpin 19 -> irq 5
IOAPIC #0 intpin 17 -> irq 9
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
IOAPIC #0 intpin 16 -> irq 10
pci1: <PCI bus> on pcib2
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 2 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 2 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
sym0: <875> port 0xb800-0xb8ff mem 0xed000000-0xed000fff,0xed800000-0xed8000ff irq 5 at device 9.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
pcm0: <Creative EMU10K1> port 0xb400-0xb41f irq 2 at device 10.0 on pci0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xa800-0xa8ff mem 0xec800000-0xec8000ff irq 9 at device 11.0 on pci0
vr0: Ethernet address: 00:90:99:22:e0:14
miibus0: <MII bus> on vr0
acphy0: <AC101 10/100 media interface> on miibus0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xec000000-0xec00007f irq 5 at device 13.0 on pci0
xl0: Ethernet address: 00:04:76:6e:1f:81
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xcb7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x80 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcf0: can't reserve irq, polled mode.
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
iic0: <I2C general purpose I/O> on iicbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master UDMA100
ata1-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad2: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata1-master UDMA33
acd0: CDROM <ATAPI CDROM> at ata1-slave using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s4a
===============================================================================
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0107151621470.17342-200000>