Date: Sun, 31 Mar 2002 15:11:08 +0200 From: John Angelmo <john@veidit.net> To: mobile@freebsd.org Subject: Symbol Spectrum24 PC-Card Message-ID: <3CA70AEC.2050405@veidit.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hello
I have a problem with my Symbol Spectrum 24 PC-Card
I get this error on boot (or when the card is inserted):
wi0: <WaveLAN/IEEE 802.11> at port 0x280-0x2c7 iomem 0xd4000-0xd43ff irq
5 flags 0x10000 slot 0 on pccard0
wi0: 802.11 address: 00:a0:f8:90:37:44
wi0: using RF:PRISM2 MAC:HFA3841, Firmware: 1.1 variant 2
wi0: timeout in wi_cmd 0; event status 0
wi0: timeout in wi_cmd 0; event status 0
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: init failed
wi0: timeout in wi_seek to fce0/0; last status 8021
wi0: timeout in wi_seek to fc07/0; last status 8021
wi0: timeout in wi_seek to fc81/0; last status 8021
wi0: timeout in wi_seek to fc00/0; last status 8021
wi0: timeout in wi_seek to fc83/0; last status 8021
wi0: timeout in wi_seek to fc84/0; last status 8021
wi0: timeout in wi_seek to fc06/0; last status 8021
wi0: timeout in wi_seek to fc09/0; last status 8021
wi0: timeout in wi_seek to fc0c/0; last status 8021
wi0: timeout in wi_seek to fc04/0; last status 8021
wi0: timeout in wi_seek to fc02/0; last status 8021
wi0: timeout in wi_seek to fc03/0; last status 8021
wi0: timeout in wi_seek to fc0e/0; last status 8021
wi0: timeout in wi_seek to fc01/0; last status 8021
wi0: timeout in wi_seek to fc28/0; last status 8021
wi0: timeout in wi_seek to fc23/0; last status 8021
wi0: timeout in wi_seek to fc24/0; last status 8021
wi0: timeout in wi_seek to fc85/0; last status 8021
wi0: timeout in wi_seek to fc80/0; last status 8021
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: wi_cmd: busy bit won't clear.
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed
wi0: wi_cmd: busy bit won't clear.
I added my dmesg to this mail and pccard.conf looks like this:
card "Symbol Technologies" "LA4111 Spectrum24 Wireless LAN PC Card"
config auto "wi" ? 0x10000
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Thanks in advance
/John
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #2: Sat Mar 30 10:24:19 CET 2002
root@freebsd.telia.com:/usr/obj/usr/src/sys/Linn
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (847.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 132579328 (129472K bytes)
config> di sio1
config> di sio0
config> di ppc0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 125620224 (122676K bytes)
Preloaded elf kernel "kernel" at 0xc035b000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035b09c.
Preloaded elf module "agp.ko" at 0xc035b0ec.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fdf60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 5 at device 2.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pcic0: <O2micro 6933 PCI-Cardbus Bridge> mem 0xf4300000-0xf4300fff irq 5 at device 2.0 on pci1
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <O2micro 6933 PCI-Cardbus Bridge> mem 0xf4301000-0xf4301fff irq 10 at device 2.1 on pci1
pcic1: Warning: O2micro OZ68xx chips may not work
pccard1: <PC Card bus (classic)> on pcic1
rl0: <RealTek 8139 10/100BaseTX> port 0xee00-0xeeff mem 0xf4302000-0xf43020ff irq 5 at device 6.0 on pci1
rl0: Ethernet address: 00:90:96:19:6b:b2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f irq 7 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x1840-0x185f irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Mouse, rev 1.00/1.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 10
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xce7ff,0xdc000-0xdffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ad0: 9590MB <TOSHIBA MK1016GAP> [19485/16/63] at ata0-master UDMA66
acd0: CDROM <QSI CD-ROM SCR-242> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
pccard: card removed, slot 0
pccard: card inserted, slot 0
wi0: <WaveLAN/IEEE 802.11> at port 0x280-0x2c7 iomem 0xd4000-0xd43ff irq 5 flags 0x10000 slot 0 on pccard0
wi0: 802.11 address: 00:a0:f8:90:37:44
wi0: using RF:PRISM2 MAC:HFA3841, Firmware: 1.1 variant 2
wi0: timeout in wi_cmd 0; event status 0
wi0: timeout in wi_cmd 0; event status 0
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: init failed
wi0: timeout in wi_seek to fce0/0; last status 8021
wi0: timeout in wi_seek to fc07/0; last status 8021
wi0: timeout in wi_seek to fc81/0; last status 8021
wi0: timeout in wi_seek to fc00/0; last status 8021
wi0: timeout in wi_seek to fc83/0; last status 8021
wi0: timeout in wi_seek to fc84/0; last status 8021
wi0: timeout in wi_seek to fc06/0; last status 8021
wi0: timeout in wi_seek to fc09/0; last status 8021
wi0: timeout in wi_seek to fc0c/0; last status 8021
wi0: timeout in wi_seek to fc04/0; last status 8021
wi0: timeout in wi_seek to fc02/0; last status 8021
wi0: timeout in wi_seek to fc03/0; last status 8021
wi0: timeout in wi_seek to fc0e/0; last status 8021
wi0: timeout in wi_seek to fc01/0; last status 8021
wi0: timeout in wi_seek to fc28/0; last status 8021
wi0: timeout in wi_seek to fc23/0; last status 8021
wi0: timeout in wi_seek to fc24/0; last status 8021
wi0: timeout in wi_seek to fc85/0; last status 8021
wi0: timeout in wi_seek to fc80/0; last status 8021
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: wi_cmd: busy bit won't clear.
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed
wi0: wi_cmd: busy bit won't clear.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CA70AEC.2050405>