Date: Sun, 6 Jan 2002 12:10:32 -0800 From: "Jeff Shevlen" <jshevlen@passedpawn.com> To: <freebsd-newbies@FreeBSD.ORG> Subject: XFree86 V3.3.6 -VS- SiS 5998 / 6326 Message-ID: <019b01c196ee$322a7270$b300a8c0@wenk>
next in thread | raw e-mail | index | archive | help
I'm XFree but there's still trouble I can't fathom. I'm running FBSD 4.4 and trying to load the X environment only (no KDE, Gnome, ...). On startx the monitor pops, then there's a brief glimpse of X (about a second), then the big disappointment - nothing. A couple of days ago I had KDE running passibly, but now, trying to run just the X environment, xserver fails. I'm confused. I've been through the XFree documentation on http://www.xfree86.org/3.3.6/SiS3.html, and played around with the options listed there, but still no X. One interesting option btw is the (**) SVGA: Option "xaa_benchmark" -- see below -- which dumps the extra benchmarking data to the bottom of the startx dump (starting at "CPU to framebuffer ..."). I don't know if this benchmark data is useful. My questions could be summarized as follows: 1. Why does X work with KDE, but not without? this seems a little counter-intuitive 2. At the end of the startx dump, what does "^M" mean? curious 3. Anyone tried Xfree version 4.x? I'm going to try Gnome, WindowMaker and Blackbox next, but I thought I'd try and get some answers regarding X first. startx --------- XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: xx November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.4-RELEASE i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1), GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic Using syscons driver with X support (version 2.0) (using VT number 9) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: model: "pc104" (**) XKB: layout: "us" (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: IntelliMouse, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms) (**) SVGA: Graphics device ID: "SiS 5598 onboard AGP" (**) SVGA: Monitor ID: "Spectre D51 Monitor" (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/us r/X11R6/lib/X11/font s/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/ Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/ usr/X11R6/lib/X11/fonts/100dpi/" (--) SVGA: PCI: SiS 6326 rev 11, Memory @ 0xdf000000, MMIO @ 0xdfef0000, I/O @ 0xcc00 Using XFree86 SiS driver version 3.0.0 (--) SVGA: using programmable clocks. (--) SVGA: chipset: sis6326 (**) SVGA: videoram: 4096k (**) SVGA: Option "xaa_benchmark" (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 175.500 MHz (**) SVGA: Mode "800x600": mode clock = 69.650 (--) SVGA: Virtual resolution set to 800x600 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: Using Linear Frame Buffer at 0x0df000000, Size 4MB (--) SVGA: SIS: Memory mapped I/O selected at 0x0dfef0000 (**) SVGA: Using hardware cursor (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: 8x8 color expand pattern fill (--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext, polytext) (--) SVGA: XAA: Using 6 128x128 areas for pixmap caching (--) SVGA: XAA: Caching tiles and stipples (--) SVGA: XAA: Horizontal and vertical lines and segments CPU to framebuffer 66.50 Mpix/sec (66.50 MB/s) 10x1 solid rectangle fill 42.20 Mpix/sec (42.20 MB/s) 40x40 solid rectangle fill 307.92 Mpix/sec (307.92 MB/s) 400x400 solid rectangle fill 421.01 Mpix/sec (421.01 MB/s) 10x10 screen copy 33.19 Mpix/sec (33.19 MB/s) 40x40 screen copy 92.17 Mpix/sec (92.17 MB/s) 400x400 screen copy 122.35 Mpix/sec (122.35 MB/s) 400x400 aligned screen copy (scroll) 123.73 Mpix/sec (123.73 MB/s) 10x10 8x8 color expand pattern fill 12.78 Mpix/sec (12.78 MB/s) 400x400 8x8 color expand pattern fill 419.14 Mpix/sec (419.14 MB/s) 416x400 scanline screen-to-screen color expand 197.78 Mpix/sec (197.78 MB/s) 10x10 screen-to-screen color expand 30.72 Mpix/sec (30.72 MB/s) ^M waiting for X server to shut down ^M ------------- XF86Config slices ------------- # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "SiS 5598 onboard AGP" VendorName "SiS" BoardName "5598" VideoRam 8192 # Option "no_accel" # Use this if acceleration is causing problems # Option "fifo_moderate" # Option "fifo_conserv" # Option "fifo_aggresive" # Option "fast_vram" # Option "pci_burst_on" Option "xaa_benchmark" # DON'T use with "ext_eng_queue" !!! # Option "ext_eng_queue" # Turbo-queue. This can cause drawing # errors, but gives some accel # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Colour SVGA server Section "Screen" Driver "svga" # Use Device "Generic VGA" for Standard VGA 320x200x256 #Device "Generic VGA" Device "SiS 5598 onboard AGP" Monitor "Spectre D51 Monitor" Subsection "Display" Depth 8 # Omit the Modes line for the "Generic VGA" device Modes "800x600" ViewPort 0 0 # Use Virtual 320 200 for Generic VGA EndSubsection Subsection "Display" Depth 16 Modes "800x600" "1024x768" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "800x600" "1024x768" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "800x600" ViewPort 0 0 EndSubsection EndSection To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-newbies" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?019b01c196ee$322a7270$b300a8c0>