Date: Sun, 18 Aug 2002 03:27:36 -0400 From: Kent Hauser <kent@tfd.com> To: stable@freebsd.org Subject: Internal modem/SCSI controller conflict Message-ID: <3D5F4C68.2020101@tfd.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------090902070304010209070500 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hi, My machine locks up tight whenever I access my internal modem. The modem is a standard modem (which works when the scsi controller is removed) and the scsi controller is an Adaptec 29160 with a DAT drive attached. Whenever I type "tip dial" (from /etc/remote: dial:dv=/dev/cuaa4:br#38400:pa=none:) the box immed locks. Mouse doesn't work. Alt-ctrl-del doesn't work. However, tape drive works fine. Any thoughts? dmesg attached. Thanks. Kent --------------090902070304010209070500 Content-Type: text/plain; name="messages" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="messages" Aug 18 03:04:19 chapel-hill /kernel: Copyright (c) 1992-2002 The FreeBSD Project. Aug 18 03:04:19 chapel-hill /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Aug 18 03:04:19 chapel-hill /kernel: The Regents of the University of California. All rights reserved. Aug 18 03:04:19 chapel-hill /kernel: FreeBSD 4.6-STABLE #0: Fri Aug 16 03:47:35 EDT 2002 Aug 18 03:04:19 chapel-hill /kernel: kent@chapel-hill.tfd.com:/usr/obj/usr/src/sys/CH Aug 18 03:04:19 chapel-hill /kernel: Timecounter "i8254" frequency 1193182 Hz Aug 18 03:04:19 chapel-hill /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (696.41-MHz 686-class CPU) Aug 18 03:04:19 chapel-hill /kernel: Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Aug 18 03:04:19 chapel-hill /kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Aug 18 03:04:19 chapel-hill /kernel: real memory = 134217728 (131072K bytes) Aug 18 03:04:19 chapel-hill /kernel: avail memory = 125464576 (122524K bytes) Aug 18 03:04:19 chapel-hill /kernel: Preloaded elf kernel "kernel" at 0xc0504000. Aug 18 03:04:19 chapel-hill /kernel: Preloaded elf module "snd_emu10k1.ko" at 0xc050409c. Aug 18 03:04:19 chapel-hill /kernel: Preloaded elf module "snd_pcm.ko" at 0xc0504140. Aug 18 03:04:19 chapel-hill /kernel: Pentium Pro MTRR support enabled Aug 18 03:04:19 chapel-hill /kernel: md0: Malloc disk Aug 18 03:04:19 chapel-hill /kernel: Using $PIR table, 11 entries at 0xc00fdf10 Aug 18 03:04:19 chapel-hill /kernel: npx0: <math processor> on motherboard Aug 18 03:04:19 chapel-hill /kernel: npx0: INT 16 interface Aug 18 03:04:19 chapel-hill /kernel: pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard Aug 18 03:04:19 chapel-hill /kernel: pci0: <PCI bus> on pcib0 Aug 18 03:04:19 chapel-hill /kernel: pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 Aug 18 03:04:19 chapel-hill /kernel: pci1: <PCI bus> on pcib1 Aug 18 03:04:19 chapel-hill /kernel: pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11 Aug 18 03:04:19 chapel-hill /kernel: isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 Aug 18 03:04:19 chapel-hill /kernel: isa0: <ISA bus> on isab0 Aug 18 03:04:19 chapel-hill /kernel: atapci0: <Intel PIIX4 ATA33 controller> port 0x1800-0x180f at device 7.1 on pci0 Aug 18 03:04:19 chapel-hill /kernel: ata0: at 0x1f0 irq 14 on atapci0 Aug 18 03:04:19 chapel-hill /kernel: ata1: at 0x170 irq 15 on atapci0 Aug 18 03:04:19 chapel-hill /kernel: uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x14c0-0x14df irq 9 at device 7.2 on pci0 Aug 18 03:04:19 chapel-hill /kernel: usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 Aug 18 03:04:19 chapel-hill /kernel: usb0: USB revision 1.0 Aug 18 03:04:19 chapel-hill /kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Aug 18 03:04:19 chapel-hill /kernel: uhub0: 2 ports with 2 removable, self powered Aug 18 03:04:19 chapel-hill /kernel: chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at device 7.3 on pci0 Aug 18 03:04:19 chapel-hill /kernel: atapci1: <Promise ATA66 controller> port 0x1480-0x14bf,0x1810-0x1813,0x1818-0x181f,0x1814-0x1817,0x1820-0x1827 mem 0xf4000000-0xf401ffff irq 5 at device 13.0 on pci0 Aug 18 03:04:19 chapel-hill /kernel: ata2: at 0x1820 on atapci1 Aug 18 03:04:19 chapel-hill /kernel: ata3: at 0x1818 on atapci1 Aug 18 03:04:19 chapel-hill /kernel: ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xf4020000-0xf4020fff irq 11 at device 14.0 on pci0 Aug 18 03:04:19 chapel-hill /kernel: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Aug 18 03:04:19 chapel-hill /kernel: pcm0: <Creative EMU10K1> port 0x14e0-0x14ff irq 10 at device 15.0 on pci0 Aug 18 03:04:19 chapel-hill /kernel: xl0: <3Com 3c900B-TPC Etherlink XL> port 0x1400-0x147f mem 0xf4021000-0xf402107f irq 9 at device 16.0 on pci0 Aug 18 03:04:19 chapel-hill /kernel: xl0: Ethernet address: 00:50:da:17:a0:3a Aug 18 03:04:19 chapel-hill /kernel: xl0: selecting 10baseT transceiver, half duplex Aug 18 03:04:19 chapel-hill /kernel: sio0: <3COM PCI FaxModem> port 0x1830-0x1837 irq 5 at device 17.0 on pci0 Aug 18 03:04:19 chapel-hill /kernel: sio0: moving to sio4 Aug 18 03:04:19 chapel-hill /kernel: sio4: type 16550A Aug 18 03:04:19 chapel-hill /kernel: orm0: <Option ROMs> at iomem 0xc0000-0xc97ff,0xc9800-0xcafff,0xe4000-0xeffff on isa0 Aug 18 03:04:19 chapel-hill /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Aug 18 03:04:19 chapel-hill /kernel: fdc0: FIFO enabled, 8 bytes threshold Aug 18 03:04:19 chapel-hill /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Aug 18 03:04:19 chapel-hill /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Aug 18 03:04:19 chapel-hill /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Aug 18 03:04:19 chapel-hill /kernel: kbd0 at atkbd0 Aug 18 03:04:19 chapel-hill /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Aug 18 03:04:19 chapel-hill /kernel: psm0: model IntelliMouse, device ID 3 Aug 18 03:04:19 chapel-hill /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Aug 18 03:04:19 chapel-hill /kernel: sc0: <System console> at flags 0x100 on isa0 Aug 18 03:04:19 chapel-hill /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Aug 18 03:04:19 chapel-hill /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Aug 18 03:04:19 chapel-hill /kernel: sio0: type 16550A Aug 18 03:04:19 chapel-hill /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Aug 18 03:04:19 chapel-hill /kernel: sio1: type 16550A Aug 18 03:04:19 chapel-hill /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Aug 18 03:04:19 chapel-hill /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode Aug 18 03:04:19 chapel-hill /kernel: ppc0: FIFO with 16/16/8 bytes threshold Aug 18 03:04:19 chapel-hill /kernel: plip0: <PLIP network interface> on ppbus0 Aug 18 03:04:19 chapel-hill /kernel: lpt0: <Printer> on ppbus0 Aug 18 03:04:19 chapel-hill /kernel: lpt0: Interrupt-driven port Aug 18 03:04:19 chapel-hill /kernel: ppi0: <Parallel I/O> on ppbus0 Aug 18 03:04:19 chapel-hill /kernel: IPsec: Initialized Security Association Processing. Aug 18 03:04:19 chapel-hill /kernel: ad4: 26105MB <IBM-DPTA-372730> [53040/16/63] at ata2-master UDMA66 Aug 18 03:04:19 chapel-hill /kernel: acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-114 0117> at ata0-master PIO4 Aug 18 03:04:19 chapel-hill /kernel: acd1: CD-RW <R/RW 4x4x24> at ata0-slave PIO4 Aug 18 03:04:19 chapel-hill /kernel: Waiting 2 seconds for SCSI devices to settle Aug 18 03:04:19 chapel-hill /kernel: sa0 at ahc0 bus 0 target 4 lun 0 Aug 18 03:04:19 chapel-hill /kernel: sa0: <SONY SDT-10000 0110> Removable Sequential Access SCSI-2 device Aug 18 03:04:19 chapel-hill /kernel: sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) Aug 18 03:04:19 chapel-hill /kernel: Mounting root from ufs:/dev/ad4s2a Aug 18 03:04:20 chapel-hill named[76]: starting (/etc/namedb/named.conf). named 8.3.3-REL Fri Aug 16 03:13:04 EDT 2002 kent@chapel-hill.tfd.com:/usr/obj/usr/src/usr.sbin/named Aug 18 03:04:20 chapel-hill named[76]: limit files set to fdlimit (1024) Aug 18 03:04:20 chapel-hill named[77]: Ready to answer queries. Aug 18 03:04:20 chapel-hill ntpd[80]: ntpd 4.1.0-a Fri Aug 16 03:12:39 EDT 2002 (1) Aug 18 03:04:20 chapel-hill ntpd[80]: kernel time discipline status 2040 Aug 18 03:04:20 chapel-hill lpd[92]: lpd startup: logging=0 Aug 18 03:04:22 chapel-hill ppp[56]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492 Aug 18 03:04:24 chapel-hill /kernel: WARNING: pseudo-random number generator used for IPsec processing Aug 18 03:09:49 chapel-hill ntpd[80]: time reset 1.275074 s Aug 18 03:09:49 chapel-hill ntpd[80]: kernel time discipline status change 2041 --------------090902070304010209070500-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D5F4C68.2020101>