Date: Sun, 9 Mar 2003 11:51:00 +0100 From: "Vincent Bruijnes" <bruijnes@xs4all.nl> To: freebsd-smp@freebsd.org Subject: supermicro+4.7-RELEASE-p7 Message-ID: <3e6b1c97$0$49114$e4fe514c@news.xs4all.nl>
next in thread | raw e-mail | index | archive | help
Dear readers,
I don't see my second cpu in 'top' so I was looking in dmesg and I saw the
following :
----------------------------------------------------------------------------
---------------
Rebooting...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE-p7 #0: Sat Mar 8 17:14:15 CET 2003
root@ams-ix.nlisp.nl:/usr/src/sys/compile/AMSIX
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.52-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
avail memory = 519065600 (506900K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc0341000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f5280
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 15 -> irq 2
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd800-0xd83f mem
0xfe900000-0xfe9fffff,0xfeade000-0xfeadefff irq 2 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:50:55
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <OHCI USB controller> at 15.2 irq 0
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin
2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
IP packet filtering initialized, divert disabled, rule-based forwarding
enabled, default to deny, logging disabled
----------------------------------------------------------------------------
---------------------
At this time I have 2 intel pentium 3 1 ghz , 370pin at 133 mhz fsb.
As I was trying to figure out what it could be I also ran mptable to check
something there
if there's something wong.
----------------------------------------------------------------------------
------------------------
============================================================================
===
MPTable, version 2.0.15
----------------------------------------------------------------------------
---
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000ff780
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0xb5
mode: Virtual Wire
----------------------------------------------------------------------------
---
MP Config Table Header:
physical address: 0x000f0cd0
signature: 'PCMP'
base table length: 248
version: 1.4
checksum: 0xa3
OEM ID: 'AMI '
Product ID: 'CNB30LE '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 24
local APIC address: 0xfee00000
extended table length: 180
extended table checksum: 7
----------------------------------------------------------------------------
---
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step
Flags
0 0x11 BSP, usable 6 8 10
0x387fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
4 0x11 usable 0xfec00000
5 0x11 usable 0xfec01000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
INT active-lo level 0 6:A 5 15
ExtINT active-hi edge 2 0 4 0
INT active-hi edge 2 1 4 1
INT active-hi edge 2 0 4 2
INT active-hi edge 2 3 4 3
INT active-hi edge 2 4 4 4
INT active-hi edge 2 5 4 5
INT active-hi edge 2 6 4 6
INT active-hi edge 2 7 4 7
INT active-hi edge 2 8 4 8
INT active-hi edge 2 9 4 9
INT active-hi edge 2 10 4 10
INT active-hi edge 2 12 4 12
INT active-hi edge 2 13 4 13
INT active-hi edge 2 14 4 14
INT active-hi edge 2 15 4 15
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 2 0 255 0
NMI active-hi edge 0 0:A 255 1
----------------------------------------------------------------------------
---
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0xd000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x100
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfe800000
address range: 0x300000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0xfe600000
address range: 0x100000
--
System Address Space
bus ID: 1 address type: I/O address
address base: 0xe000
address range: 0x1000
--
System Address Space
bus ID: 1 address type: memory address
address base: 0xfeb00000
address range: 0x100000
--
System Address Space
bus ID: 1 address type: prefetch address
address base: 0xfe700000
address range: 0x100000
--
Bus Heirarchy
bus ID: 2 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 1 address modifier: subtract
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: subtract
predefined range: 0x00000001
--
Compatibility Bus Address
bus ID: 1 address modifier: subtract
predefined range: 0x00000001
============================================================================
===
What can I try to do to this problem.. I think the problem came when I
loaded the fail-safe defaults from
the motherboard but I am not completely sure about it.. Anyone got a
suggestion for me?
Thank you very much
Vincent Bruijnes
bruijnes@xs4all.nl
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3e6b1c97$0$49114$e4fe514c>