Date: Mon, 22 Mar 2004 17:05:23 +0100 From: Artur Meski <apm@cifrid.net> To: bluetooth@freebsd.org Subject: Bluetooth, HCI timeout. Message-ID: <86y8psvpdo.fsf@menkar.cifrid.net>
index | next in thread | raw e-mail
[-- Attachment #1 --] I can't make my bluetooth Microstar dongle work neither with FreeBSD -CURRENT (2004/03/22) nor with 5.2.1-RELEASE. As far as I remember it has been working fine with 5.1-RELEASE (but with another PC). I don't know what can have an impact on it. See attached file for 'rc.bluetooth start ubt0' command "output" (http://artur.black.pl/bluetooth.txt). [-- Attachment #2 --] # /usr/local/etc/rc.bluetooth start ubt0 ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3 , OCF=0x3. Timeout ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) complete_command: ubt0hci - no pending command, state=0x1 ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x4 , OCF=0x9. Timeout ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) complete_command: ubt0hci - no pending command, state=0x1 BD_ADDR: 00:10:dc:4b:b6:64 ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x4 , OCF=0x3. Timeout ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) complete_command: ubt0hci - no pending command, state=0x1 Features: 0xff 0xff 0xf 00 00 00 00 00 <3-Slot> <5-Slot> <Encryption> <Slot offset> <Timing accuracy> <Switch> <Hold mode> <Sniff mode> <Park mode> <RSSI> <Channel quality> <SCO link> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD> <Paging scheme> <Power control> <Transparent SCO data> ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x4 , OCF=0x5. Timeout ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) complete_command: ubt0hci - no pending command, state=0x1 Max. ACL packet size: 192 bytes Number of ACL packets: 8 Max. SCO packet size: 64 bytes Number of SCO packets: 8 ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3 , OCF=0x1a. Timeout ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) complete_command: ubt0hci - no pending command, state=0x1 ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3 , OCF=0x24. Timeout ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) complete_command: ubt0hci - no pending command, state=0x1 ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3 , OCF=0x13. Timeout ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) complete_command: ubt0hci - no pending command, state=0x1 Could not execute command "initialize". Device not configured [-- Attachment #3 --]help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86y8psvpdo.fsf>