Date: Sun, 15 Aug 2004 15:39:36 +0100 (BST) From: Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> To: FreeBSD-gnats-submit@FreeBSD.org Subject: docs/70485: Update to release installation notes Message-ID: <200408151439.i7FEda6I028668@buffy.york.ac.uk> Resent-Message-ID: <200408151500.i7FF0R1j089274@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 70485
>Category: docs
>Synopsis: Update to release installation notes
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-doc
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: doc-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Aug 15 15:00:27 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Gavin Atkinson
>Release: FreeBSD 5.2-CURRENT i386
>Organization:
>Environment:
System: FreeBSD buffy.york.ac.uk 5.2-CURRENT FreeBSD 5.2-CURRENT #6: Thu Aug 12 20:22:58 BST 2004 root@buffy.york.ac.uk:/usr/obj/usr/src/sys/GENERIC i386
>Description:
The release installation notes are very out of date. Updating
these is listed as a "must resolve" on the todo list for 5.3-RELEASE.
The included patch:
- Update document to 5-CURRENT reality, including accounting
for changes in floppy layout and CD format. Some of it was
out of date when 2.2.8 was released...
- Bump up the minimum spec required from info found on
mailing lists.
- Make examples work on 5-CURRENT, add extra ones where
this may sacrifice cross-OS compatibility. Clarify other
examples.
- Add more up-to-date questions to the Q&A section, though
I'm not convinced the ones already here really belong here.
Update existing ones anyway.
- Reword some sentances ("i recommend" -> "you should" etc)
- Update size of ports collection to better match reality
An update to the other half of the installation notes, the
troubleshooting section, can be found in docs/66980.
bin/70279 and bin/70245 should also be considered for
committing so that the install notes are fully correct.
Note someone with more doc experience probably should check
this diff before it is committed, although it has survived a
"make release" and the resulting docs do seem correct.
>How-To-Repeat:
Try installing FreeBSD by following the current install notes.
>Fix:
(Patch also available at http://www.devrandom.co.uk/installnotes.diff)
Index: release/doc/en_US.ISO8859-1/installation/common/install.sgml
===================================================================
RCS file: /usr/cvs/src/release/doc/en_US.ISO8859-1/installation/common/install.sgml,v
retrieving revision 1.26
diff -u -r1.26 install.sgml
--- release/doc/en_US.ISO8859-1/installation/common/install.sgml 7 Jul 2004 13:11:59 -0000 1.26
+++ release/doc/en_US.ISO8859-1/installation/common/install.sgml 15 Aug 2004 14:32:14 -0000
@@ -77,10 +77,10 @@
<!-- i386/pc98 text starts here -->
- <para arch="i386,pc98">&os; for the &arch.print; requires a 386 or better
- processor to run (sorry, there is no support for 286 processors)
- and at least 5 megs of RAM to install and 4 megs of RAM to
- run. You will need at least 100MB of free hard drive space for the
+ <para arch="i386,pc98">&os; for the &arch.print; requires a 486 or better
+ processor to install and run (although &os; can run on 386 processors with
+ a custom kernel) and at least 8 megs of RAM to install and 7 megs to
+ run. You will need at least 150MB of free hard drive space for the
most minimal installation. See below for ways of shrinking
existing DOS partitions in order to install &os;.</para>
@@ -139,7 +139,7 @@
<title>Floppy Disk Image Instructions</title>
<para arch="i386,alpha,pc98">Depending on how you choose to install &os;, you may need to
- create a set of floppy disks (usually two) to begin the installation
+ create a set of floppy disks (usually three) to begin the installation
process. This section briefly describes how to create these disks,
either from a CDROM installation or from the Internet. Note that in
the common case of installing &os; from CDROM, on a machine that
@@ -148,23 +148,20 @@
<para arch="i386,alpha">For most CDROM or network installations, all you need to
copy onto actual floppies from the <filename>floppies/</filename> directory are the
- <filename>kern.flp</filename> and <filename>mfsroot.flp</filename>
- images (for 1.44MB floppies). Depending on your hardware, you may
- also need to make the third <filename>drivers.flp</filename> image
- to provide necessary device drivers.</para>
+ <filename>boot.flp</filename> and <filename>kernX.flp</filename>
+ images (for 1.44MB floppies).</para>
<para arch="pc98">For a normal CDROM or network installation, all you need
to copy onto actual floppies from the <filename>floppies/</filename>
- directory are the <filename>kern.flp</filename> and <filename>mfsroot.flp</filename>
- images (for 1.44MB floppies) or <filename>kern-small.flp</filename> and
- <filename>mfsroot-small.flp</filename> images (for 1.2MB floppies).</para>
+ directory are the <filename>boot.flp</filename> and <filename>kernX.flp</filename>
+ images (for 1.44MB floppies) or <filename>boot-small.flp</filename> and
+ <filename>kern-small.flp</filename> images (for 1.2MB floppies).</para>
<para arch="i386,alpha,pc98">Getting these images over the network is easy. Simply fetch
the
- <replaceable>release</replaceable><filename>/floppies/kern.flp</filename>,
- <replaceable>release</replaceable><filename>/floppies/mfsroot.flp</filename>,
- and
- <replaceable>release</replaceable><filename>/floppies/drivers.flp</filename>
+ <replaceable>release</replaceable><filename>/floppies/boot.flp</filename>,
+ and all of the
+ <replaceable>release</replaceable><filename>/floppies/kernX.flp</filename>
files from <ulink
url="&release.url;"></ulink>
or one of the many mirrors listed at <ulink
@@ -173,16 +170,18 @@
<ulink url="http://mirrorlist.FreeBSD.org/"></ulink>; Web pages.
</para>
- <para arch="i386,alpha">Get two blank, freshly formatted floppies and image copy
- <filename>kern.flp</filename> onto one and <filename>mfsroot.flp</filename> onto the other. These images are
+ <para arch="i386,alpha">Get approximately three blank, freshly formatted floppies and image copy
+ <filename>boot.flp</filename> onto one and the <filename>kernX.flp</filename> files
+ onto the others. These images are
<emphasis>not</emphasis> DOS files. You cannot simply copy them to a DOS or UFS floppy
as regular files, you need to <quote>image</quote> copy them to the floppy with
<filename>fdimage.exe</filename> under DOS (see the
<filename>tools</filename> directory on your CDROM or &os; FTP
mirror) or the &man.dd.1; command in UNIX.</para>
- <para arch="pc98">Get two blank, freshly formatted floppies and image copy
- <filename>kern.flp</filename> onto one and <filename>mfsroot.flp</filename> onto the other. These images are
+ <para arch="pc98">Get approximately three blank, freshly formatted floppies and image copy
+ <filename>boot.flp</filename> onto one and the <filename>kernX.flp</filename> files
+ onto the others. These images are
<emphasis>not</emphasis> DOS files. You cannot simply copy them to a DOS or UFS floppy
as regular files, you need to <quote>image</quote> copy them to the floppy with
<filename>rawrite.exe</filename> under DOS (see the
@@ -192,39 +191,34 @@
<para arch="i386,alpha,pc98">For example, to create the kernel floppy image from DOS, you'd
do something like this:</para>
- <screen arch="i386,alpha"><prompt>C></prompt> <userinput>fdimage kern.flp a:</userinput></screen>
+ <screen arch="i386,alpha"><prompt>C></prompt> <userinput>fdimage boot.flp a:</userinput></screen>
<screen arch="pc98"><prompt>A></prompt> <userinput>rawrite</userinput></screen>
- <para arch="i386,alpha">Assuming that you'd copied <filename>fdimage.exe</filename> and <filename>kern.flp</filename> into a directory
- somewhere. You would do the same for <filename>mfsroot.flp</filename>, of course.</para>
+ <para arch="i386,alpha">Assuming that you'd copied <filename>fdimage.exe</filename> and <filename>boot.flp</filename> into a directory
+ somewhere. You would do the same for the <filename>kernX.flp</filename> files, of course.</para>
- <para arch="pc98">Assuming that you'd copied <filename>rawrite.exe</filename> and <filename>kern.flp</filename> into a directory
- somewhere. You would do the same for <filename>mfsroot.flp</filename>, of course.</para>
+ <para arch="pc98">Assuming that you'd copied <filename>rawrite.exe</filename> and <filename>boot.flp</filename> into a directory
+ somewhere. You would do the same for the <filename>kernX.flp</filename> files, of course.</para>
<para arch="i386,alpha,pc98">If you're creating the boot floppy from a UNIX machine, you
may find that:</para>
- <screen arch="i386,alpha">&prompt.root; <userinput>dd if=floppies/kern.flp of=/dev/rfd0</userinput></screen>
- <screen arch="pc98">&prompt.root; <userinput>dd if=floppies/kern.flp of=/dev/rfd0.1440</userinput></screen>
+ <screen arch="i386,alpha">&prompt.root; <userinput>dd if=floppies/boot.flp of=/dev/rfd0</userinput></screen>
+ <screen arch="pc98">&prompt.root; <userinput>dd if=floppies/boot.flp of=/dev/rfd0.1440</userinput></screen>
+
+ <para arch="i386,alpha">or</para>
+
+ <screen arch="i386,alpha">&prompt.root; <userinput>dd if=floppies/boot.flp of=/dev/fd0</userinput></screen>
<para arch="i386,alpha,pc98">or</para>
- <screen arch="i386,alpha">&prompt.root; <userinput>dd if=floppies/kern.flp of=/dev/floppy</userinput></screen>
- <screen arch="pc98">&prompt.root; <userinput>dd if=floppies/kern-small.flp of=/dev/rfd0.1200</userinput></screen>
+ <screen arch="i386,alpha">&prompt.root; <userinput>dd if=floppies/boot.flp of=/dev/floppy</userinput></screen>
+ <screen arch="pc98">&prompt.root; <userinput>dd if=floppies/boot-small.flp of=/dev/rfd0.1200</userinput></screen>
<para arch="i386,alpha,pc98">work well, depending on your hardware and operating system
environment (different versions of UNIX have different names
for the floppy drive).</para>
- <para arch="alpha">If you're on an alpha machine that can network-boot its
- floppy images or you have a 2.88MB or LS-120 floppy capable of
- taking a 2.88MB image on an x86 machine, you may wish to use
- the single (but twice as large) <filename>boot.flp</filename> image.
- It contains the contents of <filename>kern.flp</filename> and <filename>mfsroot.flp</filename> on
- a single floppy. This file should also be used as the
- boot file for those mastering <quote>El Torito</quote> bootable CD images. See
- the &man.mkisofs.8; command for more information.</para>
-
<para arch="amd64">Floppy disk based install is not supported
on &os;/&arch;.</para>
</sect2>
@@ -240,19 +234,15 @@
installation from it:
<itemizedlist>
<listitem>
- <para>If your system supports bootable CDROM media
- (usually an option which can be selectively enabled in the
- controller's setup menu or in the PC BIOS for some
- systems) and you have it enabled, &os; supports the
- <quote>El Torito</quote> bootable CD standard. Simply
- put the installation CD in your CDROM drive and boot the
- system to begin installation.</para>
+ <para>If your system supports the <quote>CDBOOT</quote> standard for
+ bootable CDROM media and you have booting from CD enabled,
+ simply put the &os; installation CD in your CDROM drive and
+ boot the system to begin installation.</para>
</listitem>
<listitem>
<para>Build a set of &os; boot floppies from the
<filename>floppies/</filename> directory in every &os;
- distribution. Either simply use the
- <filename>makeflp.bat</filename> script from DOS or read
+ distribution. Read
<xref linkend="floppies"> for more information on creating
the bootable floppies under different operating systems.
Then you simply boot from the first floppy and you should
@@ -280,26 +270,26 @@
<para arch="i386">If you don't have a CDROM (or your computer does not
support booting from CDROM) and would like to simply install
- over the net using PPP, SLIP or a dedicated connection.
- You should start the installation by building
+ over the net using PPP, SLIP or a dedicated connection,
+ you should start the installation by building
a set of &os; boot floppies from the files
- <filename>floppies/kern.flp</filename> and
- <filename>floppies/mfsroot.flp</filename> using the instructions
+ <filename>floppies/boot.flp</filename> and
+ <filename>floppies/kernX.flp</filename> using the instructions
found in <xref linkend="floppies">. Restart your computer using
- the <filename>kern.flp</filename> disk; when prompted, insert
- the <filename>mfsroot.flp</filename> disk. Then, please go to
+ the <filename>boot.flp</filename> disk; when prompted, insert
+ the other disks as required. Then, please go to
<xref linkend="ftpnfs"> for additional tips on installing
via FTP or NFS.</para>
<para arch="pc98">If you don't have a CDROM and would like to
- simply install over the net using PPP, SLIP or a dedicated connection.
- You should start the installation by building
+ simply install over the net using PPP, SLIP or a dedicated connection,
+ you should start the installation by building
a set of &os; boot floppies from the files
- <filename>floppies/kern.flp</filename> and
- <filename>floppies/mfsroot.flp</filename> using the instructions
+ <filename>floppies/boot.flp</filename> and
+ <filename>floppies/kernX.flp</filename> using the instructions
found in <xref linkend="floppies">. Restart your computer using
- the <filename>kern.flp</filename> disk; when prompted, insert
- the <filename>mfsroot.flp</filename> disk. Then, please go to
+ the <filename>boot.flp</filename> disk; when prompted, insert
+ the other disks as required. Then, please go to
<xref linkend="ftpnfs"> for additional tips on installing
via FTP or NFS.</para>
@@ -316,18 +306,18 @@
<para arch="alpha">Alternatively you can boot the installation
from floppy disk. You should start the installation by building
- a set of &os; boot floppies from the files
- <filename>floppies/kern.flp</filename> and
- <filename>floppies/mfsroot.flp</filename> using the instructions
+ a set of &os; boot floppies from the
+ <filename>floppies/boot.flp</filename> and
+ <filename>floppies/kernX.flp</filename> files using the instructions
found in <xref linkend="floppies">. From the SRM console prompt
(<literal>>>></literal>), just insert the
- <filename>kern.flp</filename> floppy and type the following
+ <filename>boot.flp</filename> floppy and type the following
command to start the installation:</para>
<screen arch="alpha">>>><userinput>boot dva0</userinput></screen>
- <para arch="alpha">Insert the <filename>mfsroot.flp</filename>
- floppy when prompted and you will end up at the first screen of
+ <para arch="alpha">Insert the other floppies when prompted and
+ you will end up at the first screen of
the install program.</para>
<!-- sparc64 text starts here -->
@@ -462,7 +452,8 @@
<listitem>
<para>If you would be able to FTP install &os; directly
from the CDROM drive in some &os; machine, it's quite
- easy: You simply add the following line to the password file
+ easy: You ensure an FTP server is running and then
+ simply add the following line to the password file
(using the &man.vipw.8; command):</para>
<screen>ftp:*:99:99::0:0:FTP:/cdrom:/sbin/nologin</screen>;
@@ -545,17 +536,15 @@
floppy, as the following sequence of commands
illustrates:</para>
- <screen>&prompt.root; <userinput>fdformat -f 1440 fd0.1440</userinput>
-&prompt.root; <userinput>disklabel -w -r fd0.1440 floppy3</userinput>
-&prompt.root; <userinput>newfs -t 2 -u 18 -l 1 -i 65536 /dev/fd0</userinput></screen>
+ <screen>&prompt.root; <userinput>fdformat -f 1440 fd0</userinput>
+&prompt.root; <userinput>disklabel -w fd0 floppy3</userinput>
+&prompt.root; <userinput>newfs -i 65536 /dev/fd0</userinput></screen>
<para>After you've formatted the floppies for DOS or UFS, you'll
- need to copy the files onto them. The distribution files are
- split into chunks conveniently sized so that 5 of them will fit
- on a conventional 1.44MB floppy. Go through all your floppies,
- packing as many files as will fit on each one, until you've got
- all the distributions you want packed up in this fashion. Each
- distribution should go into its own subdirectory on the floppy,
+ need to copy the files onto them.
+ The distribution files are sized so that a floppy disk will hold
+ a single file.
+ Each distribution should go into its own subdirectory on the floppy,
e.g.: <filename>a:\bin\bin.inf</filename>, <filename>a:\bin\bin.aa</filename>, <filename>a:\bin\bin.ab</filename>, ...</para>
<important>
@@ -565,8 +554,7 @@
when fetching and concatenating the distribution. When
putting distributions onto floppies, the
<filename>distname.inf</filename> file <emphasis>must</emphasis> occupy the first
- floppy of each distribution set. This is also covered in
- <filename>README.TXT</filename>.</para>
+ floppy of each distribution set.</para>
</important>
<para>Once you come to the Media screen of the install, select
@@ -618,7 +606,7 @@
this:</para>
<screen>&prompt.root; <userinput>cd <replaceable>/where/you/have/your/dists</replaceable></userinput>
-&prompt.root; <userinput>tar cvf /dev/rsa0 <replaceable>dist1</replaceable> .. <replaceable>dist2</replaceable></userinput></screen>
+&prompt.root; <userinput>tar cvf /dev/sa0 <replaceable>dist1</replaceable> .. <replaceable>dist2</replaceable></userinput></screen>
<para>When you go to do the installation, you should also make
sure that you leave enough room in some temporary directory
@@ -654,8 +642,8 @@
between two computers. The link must be hard-wired because
the SLIP installation doesn't currently offer a dialing
capability. If you need to dial out with a modem or otherwise
- dialog with the link before connecting to it, then I recommend
- that the PPP utility be used instead.</para>
+ dialog with the link before connecting to it, then the PPP
+ utility should be used instead.</para>
<para>If you're using PPP, make sure that you have your
Internet Service Provider's IP address and DNS information
@@ -699,7 +687,7 @@
<sect4>
<title>Ethernet</title>
- <para>&os; supports many common Ethernet cards; a table
+ <para>&os; supports most common Ethernet cards; a table
of supported cards is
provided as part of the &os; Hardware Notes (see
<filename>HARDWARE.TXT</filename> in
@@ -741,7 +729,7 @@
<para>If this server supports only <quote>privileged port</quote> access (this is
generally the default for Sun and Linux workstations), you
- will need to set this option in the Options menu before
+ may need to set this option in the Options menu before
installation can proceed.</para>
<para>If you have a poor quality Ethernet card which suffers from very
@@ -842,19 +830,21 @@
</step>
<step>
<para>If you don't get any output on your serial console,
- plug the keyboard in again and wait for some beeps. If you
- are booting from the CDROM, proceed to <xref
- linkend="hitspace"> as soon as you
+ plug the keyboard in again. If you are booting from the
+ CDROM, proceed to <xref linkend="hitspace"> as soon as you
hear the beep.</para>
</step>
<step>
- <para>For a floppy boot, the first beep means to remove the
- <filename>kern.flp</filename> floppy and insert the
- <filename>mfsroot.flp</filename> floppy, after
- which you should press <keycap>Enter</keycap> and wait for another beep.</para>
+ <para>If booting from floppies, when access to the disk stops, insert
+ the first of the <filename>kernX.flp</filename> disks and press
+ <keycap>Enter</keycap>. When access to this disk finishes, insert
+ the next <filename>kernX.flp</filename> disk and press <keycap>Enter</keycap>,
+ and repeat until all <filename>kernX.flp</filename> disks have been
+ inserted. When disk activity finishes, reinsert the <filename>boot.flp</filename>
+ floppy disk and press <keycap>Enter</keycap>.</para>
</step>
<step id="hitspace">
- <para>Hit the space bar, then enter</para>
+ <para>Once a beep is heard, hit the number <keycap>6</keycap>, then enter</para>
<screen><userinput>boot -h</userinput></screen>
@@ -965,7 +955,10 @@
<answer>
<para>Ongoing work with BSDI's &man.doscmd.1; utility will
suffice in many cases, though
- it still has some rough edges. If you're interested in
+ it still has some rough edges. The
+ <filename role="package">emulators/doscmd</filename> port/package
+ can be found in the &os; Ports Collection.
+ If you're interested in
working on this, please send mail to the &a.emulation;
and indicate that you're interested in joining this ongoing
effort!</para>
@@ -976,6 +969,38 @@
X Window System (XFree86) to operate.</para>
</answer>
</qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>Can I run µsoft.windows; applications under &os;?</para>
+ </question>
+
+ <answer>
+ <para>There are several ports/packages in the &os; Ports Collection
+ which can enable the use of many &windows; applications.
+ The <filename role="package">emulators/wine</filename> port/package
+ provides a compatibility layer on top of &os; which allow many
+ &windows; applications to be run within X Windows (XFree86).
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>Can I run other Operating Systems under &os;?</para>
+ </question>
+
+ <answer>
+ <para>Again, there are several ports/packages in the &os; Ports Collection
+ which simulate "virtual machines" and allow other operating systems to run
+ on top of &os;.
+ The <filename role="package">emulators/bochs</filename> port/package
+ allows µsoft.windows;, Linux and even other copies of &os; to be run within a
+ window on the &os; desktop.
+ The <filename role="package">emulators/vmware2</filename> and
+ <filename role="package">emulators/vmware3</filename> ports/packages
+ allow the commercial VMware virtual machine software to be run on &os;.</para>
+ </answer>
+ </qandaentry>
</qandaset>
<qandaset arch="alpha">
Index: release/doc/en_US.ISO8859-1/installation/common/layout.sgml
===================================================================
RCS file: /usr/cvs/src/release/doc/en_US.ISO8859-1/installation/common/layout.sgml,v
retrieving revision 1.7
diff -u -r1.7 layout.sgml
--- release/doc/en_US.ISO8859-1/installation/common/layout.sgml 7 Jul 2004 13:11:59 -0000 1.7
+++ release/doc/en_US.ISO8859-1/installation/common/layout.sgml 15 Aug 2004 14:32:14 -0000
@@ -93,7 +93,7 @@
filenames in <filename>packages</filename>/ to the &man.pkg.add.1; command.</para>
<para>The Ports Collection may be installed like any other
- distribution and requires about 100MB unpacked. More
+ distribution and requires about 190MB unpacked. More
information on the ports collection may be obtained from
<ulink url="http://www.FreeBSD.org/ports/">http://www.FreeBSD.org/ports/</ulink>; or locally from
<filename>/usr/share/doc/handbook</filename> if you've installed the <filename>doc</filename>
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200408151439.i7FEda6I028668>