Date: Mon, 09 Feb 2004 14:30:20 +0300 From: Yuri Grebenkin <rainbreath@hotpop.com> To: Ulrich Spoerlein <q@uni.de> Cc: freebsd-stable@freebsd.org Subject: Re: nVidia Riva TNT2 M64 problem on FreeBSD4.9 Message-ID: <opr23owuzrw41ezb@smtp.hotpop.com> In-Reply-To: <20040207171500.GB805@galgenberg.net> References: <opr2o5s1jmw41ezb@smtp.hotpop.com> <opr2o6ayn3w41ezb@smtp.hotpop.com> <20040201162804.GB614@einstein.lab> <opr2pcyjcgw41ezb@smtp.hotpop.com> <20040201192118.GF614@einstein.lab> <opr2povcv9w41ezb@smtp.hotpop.com> <20040207171500.GB805@galgenberg.net>
next in thread | previous in thread | raw e-mail | index | archive | help
------------hmlOdyN2xSfyn0rGDgbIJo
Content-Type: text/plain; format=flowed; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
On Sat, 7 Feb 2004 18:15:00 +0100, Ulrich Spoerlein <q@uni.de> wrote:
> On Mon, 02.02.2004 at 01:03:02 +0300, Yuri Grebenkin wrote:
>> And could anyone receive my attachments, is it possible or I'm in
>> trouble?
>> Hell... |:-)
>
> Attachments get filtered. You would have to attach them inline.
>
> To your problem: Force AGP Mode to 1 (It won't make a difference
> anyway), then try this:
>
> In kernel: add 'device agp', recompile
> in /boot/loader/conf: remove agp_load="YES"
> Recompile the port with WITH_FREEBSD_AGP
> Edit XF86Config, add Option "NvAgp" "0"
Hangs up as usual.
>
> If this does not work, do the following:
> Remove 'device agp' from kernel, recompile
> recompile the port without any options
> Edit XF86Config, set NvAgp to 1.
Hangs too.
>
> Just make sure, to never mix two AGP drivers (kernel + module +
> XF86Config)
>
> Ulrich Spörlein
I've probed to use all flags to make this nvidia-driver with your first
configuration.
For example, I used FORCE_AGP_RATE and set hw.nvidia...ReqAGPRate to 1
from 7.
But still I get a hang up.
I've attached my configuration simply as text files.
But here is the strange thing:
After 'kldload nvidia' I do 'sysctl -a -o | grep nvidia' and get the
following output:
hw.nvidia.agp.host-bridge.rates: 4x 2x 1x
hw.nvidia.agp.host-bridge.fw: supported
hw.nvidia.agp.host-bridge.sba: supported
hw.nvidia.agp.host-bridge.registers: 0x1f000217:0x00000000
hw.nvidia.agp.card.rates: 4x 2x 1x
hw.nvidia.agp.card.fw: not supported
hw.nvidia.agp.card.sba: not supported
hw.nvidia.agp.card.registers: 0x1f000007:0x00000000
hw.nvidia.agp.status.status: disabled
hw.nvidia.agp.status.driver: n/a
hw.nvidia.agp.status.rate: n/a
hw.nvidia.agp.status.fw: n/a
hw.nvidia.agp.status.sba: n/a
hw.nvidia.version: NVIDIA FreeBSD x86 nvidia.ko Kernel Module 1.0-4365
Wed May 28 09:20:25 PDT 2003
hw.nvidia.registry.EnableVia4x: 0
hw.nvidia.registry.EnableALiAGP: 0
hw.nvidia.registry.ReqAGPRate: 7
hw.nvidia.registry.EnableAGPSBA: 0
hw.nvidia.registry.EnableAGPFW: 0
hw.nvidia.registry.SoftEDIDs: 1
hw.nvidia.registry.Mobile: 4294967295
hw.nvidia.registry.ResmanDebugLevel: 4294967295
hw.nvidia.registry.FlatPanelMode: 0
hw.nvidia.cards.0.model: RIVA TNT2 Model 64/Model 64 Pro
hw.nvidia.cards.0.irq: 11
hw.nvidia.cards.0.vbios: ??.??.??.??.??
hw.nvidia.cards.0.type: AGP
Isn't it strange that hw.nvidia.cards.0.vbios is set to ??.??.??.??.?? ?
Maybe I just have a broken BIOS on my card?
Besides I'm running it on VIA chipset motherboard that mentioned (even in
this grep's output) as not a good combination with card in some way.
But, you know, it runs normally on RH Linux, thus, probably it's a problem
with the driver.
And if hw.nvidia.cards.0.vbios must be set to some particular value and it
don't seem to be so then It's possible to think that I have a wrong card
BIOS.
Please everybody, who have such a card, check out what value do you have
and reply me!
Thank you so much.
Yuri.
------------hmlOdyN2xSfyn0rGDgbIJo
Content-Disposition: attachment; filename=loader.conf
Content-Type: application/octet-stream; name=loader.conf
Content-Transfer-Encoding: 8bit
# -- sysinstall generated deltas -- #
userconfig_script_load="YES"
------------hmlOdyN2xSfyn0rGDgbIJo
Content-Disposition: attachment; filename=XF86Config
Content-Type: application/octet-stream; name=XF86Config
Content-Transfer-Encoding: 8bit
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
# FontPath "/usr/local/lib/pcemu/font/"
EndSection
Section "Module"
Load "freetype"
# Load "xtt"
Load "extmod"
Load "glx"
#Load "dri"
Load "dbe"
#Load "record"
#Load "xtrap"
Load "type1"
#Load "speedo"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "SysMouse"
Option "Emulate3Buttons"
Option "Device" "/dev/sysmouse"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 61.0
VertRefresh 48.0 - 75.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
Option "NvAgp" "0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
------------hmlOdyN2xSfyn0rGDgbIJo
Content-Disposition: attachment; filename=dmesg.txt
Content-Type: text/plain; name=dmesg.txt
Content-Transfer-Encoding: 8bit
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #3: Mon Feb 9 13:16:23 MSK 2004
breath@breath.breath.home:/usr/obj/usr/src/sys/Y20040205
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1008053650 Hz
CPU: Intel Celeron (1008.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 126160896 (123204K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdb10
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uaudio0: audio descriptors make no sense, error=4
device_probe_and_attach: uaudio0 attach returned 6
ugen0: Evolution Electronics Ltd. MK-361C USB MIDI keyboard, rev 1.00/2.52, addr 2
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 5 at device 7.5 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
pcm1: <Crystal Semiconductor CS4281> mem 0xd8000000-0xd800ffff,0xd8010000-0xd8010fff irq 10 at device 10.0 on pci0
pcm1: <Cirrus Logic CS4297 AC97 Codec>
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 19092MB <ST320410A> [38792/16/63] at ata0-master UDMA100
ad2: 4112MB <SAMSUNG SV0432D> [8912/15/63] at ata1-master UDMA66
acd0: CDROM <ASUS CD-S520/A> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
ad2s1c: UDMA ICRC error reading fsbn 48467 of 136-143 (ad2s1 bn 48467; cn 3 tn 4 sn 20) retrying
ad2s1c: UDMA ICRC error reading fsbn 48467 of 136-143 (ad2s1 bn 48467; cn 3 tn 4 sn 20) retrying
ad2: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ata1-slave: ATA identify retries exceeded
done
ad2s1c: UDMA ICRC error reading fsbn 48467 of 136-143 (ad2s1 bn 48467; cn 3 tn 4 sn 20) falling back to PIO mode
link_elf: symbol linux_ioctl_register_handler undefined
link_elf: symbol linux_ioctl_register_handler undefined
link_elf: symbol linux_ioctl_register_handler undefined
nvidia0: <RIVA TNT2 Model 64/Model 64 Pro> mem 0xd4000000-0xd5ffffff,0xd6000000-0xd6ffffff irq 11 at device 0.0 on pci1
nvidia0: detached
pid 419 (kdeinit), uid 1000: exited on signal 11 (core dumped)
------------hmlOdyN2xSfyn0rGDgbIJo
Content-Disposition: attachment; filename=rc.conf
Content-Type: application/octet-stream; name=rc.conf
Content-Transfer-Encoding: 8bit
kern_securelevel_enable="NO"
moused_enable="YES"
moused_flags="-3"
moused_port="/dev/psm0"
moused_type="auto"
nfs_reserved_port_only="YES"
saver="green"
sendmail_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
hostname="breath.breath.home"
apm_enable="NO"
------------hmlOdyN2xSfyn0rGDgbIJo
Content-Disposition: attachment; filename=Y20040205
Content-Type: application/octet-stream; name=Y20040205
Content-Transfer-Encoding: 8bit
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.54 2003/04/28 03:41:46 simokawa Exp $
machine i386
#cpu I386_CPU
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident Y20040205
maxusers 0
options CPU_ENABLE_SSE
options CPU_SUSP_HLT
options USER_LDT
device pcm
#device csa
#device smbus
#device viapm
#device smb
device acpica
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
#options HTT # HyperThreading Technology
device isa
#device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
#device ata0 at isa? port IO_WD1 irq 14
#device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT/Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
device adv0 at isa?
device adw
device bt0 at isa?
device aha0 at isa?
device aic0 at isa?
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device dpt # DPT Smartcache - See LINT for options!
#device iir # Intel Integrated RAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device ciss # Compaq SmartRAID 5* series
# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
#device apm0 at nexus? disable flags 0x20 # Advanced Power Management
#device apm0
# PCCARD (PCMCIA) support
#device card
#device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
#device sio2 at isa? disable port IO_COM3 irq 5
#device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 NICs
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device bge # Broadcom BCM570x (``Tigon III'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
#device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
#device fe0 at isa? disable port 0x300
# Xircom Ethernet
#device xe
# PRISM I IEEE 802.11b wireless NIC.
#device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
#device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? disable port 0x280 irq 10 drq 0
#device cs0 at isa? disable port 0x300
#device sn0 at isa? disable port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3 Player
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
------------hmlOdyN2xSfyn0rGDgbIJo
Content-Disposition: attachment; filename=XFree86.0.log
Content-Type: application/octet-stream; name=XFree86.0.log
Content-Transfer-Encoding: 8bit
It was created 20040201 - with common configuration.
But I think that problem was not touched a bit by my today-configuration.
So this log is still actual.
It was captured by me just after a hang up.
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 4.9 i386 [ELF]
Build Date: 07 October 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Feb 1 16:57:37 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse0"
(==) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev c4 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 16 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 16 class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 1106,3057 rev 40 class 06,80,00 hdr 00
(II) PCI: 00:07:5: chip 1106,3058 card 1106,3058 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:0a:0: chip 1013,6005 card 0000,0000 rev 01 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002d card 0000,0000 rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] rev 21, Mem @ 0xd6000000/24, 0xd4000000/25
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]E
[1] -1 0 0xd8010000 - 0xd801ffff (0x10000) MX[B]E
[2] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[3] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
[4] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[B](B)
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
[6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[8] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[9] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[10] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
(II) PCI Memory resource overlap reduced 0xd8000000 from 0xdfffffff to 0xd800ffff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd8000000 - 0xd800ffff (0x10000) MX[B]E
[1] -1 0 0xd8010000 - 0xd801ffff (0x10000) MX[B]E
[2] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[3] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
[4] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[B](B)
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
[6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[8] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[9] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[10] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd8000000 - 0xd800ffff (0x10000) MX[B]E
[6] -1 0 0xd8010000 - 0xd801ffff (0x10000) MX[B]E
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[8] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
[9] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
[13] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[14] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4365
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4365
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA XFree86 Driver 1.0-4365 Wed May 28 09:23:41 PDT 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd8000000 - 0xd800ffff (0x10000) MX[B]E
[6] -1 0 0xd8010000 - 0xd801ffff (0x10000) MX[B]E
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[8] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
[9] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
[13] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[14] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd8000000 - 0xd800ffff (0x10000) MX[B]E
[6] -1 0 0xd8010000 - 0xd801ffff (0x10000) MX[B]E
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[8] -1 0 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
[9] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
[16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[17] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[18] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[19] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NvAGP" "3"
(**) NVIDIA(0): Use of any AGP requested (try AGPGART, then try NVIDIA's AGP)
(--) NVIDIA(0): Linear framebuffer at 0xD4000000
(--) NVIDIA(0): MMIO registers at 0xD6000000
(==) NVIDIA(0): Write-combining range (0xd6601000,0x1000) was already clear
------------hmlOdyN2xSfyn0rGDgbIJo--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?opr23owuzrw41ezb>