Date: Sun, 15 Jan 2006 13:02:06 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Joshua Tinnin <krinklyfig@comcast.net> Cc: freebsd-current@freebsd.org Subject: Re: call for sk(4) testers Message-ID: <20060115040206.GB27154@rndsoft.co.kr> In-Reply-To: <200601140006.51237.krinklyfig@comcast.net> References: <20060112113251.GB13481@rndsoft.co.kr> <200601140006.51237.krinklyfig@comcast.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jan 14, 2006 at 12:06:48AM -0700, Joshua Tinnin wrote: > On Thu 12 Jan 06 04:32, Pyun YongHyeon <pyunyh@gmail.com> wrote: > > I'd like to hear any success/failure reports. If you have a NIC that > > is supported by sk(4) please give it a try and let me know the > > result. > > So far so good, running 6.0-RELEASE-p2 on an i386 machine. The sk(4) NIC > is an onboard Marvell 88E8001 Yukon Gigabit Ethernet on an Asus A7N8X-E > Deluxe motherboard: > Thank you for your time and testing. Did you notice a increase in throughput? While testing stock sk(4) I saw numerous "discard frame w/o leading ethernet header..." messages under high packet rates. You should not see these messages anymore in new driver. > # uname -a > FreeBSD smogmonster.local 6.0-RELEASE-p2 FreeBSD 6.0-RELEASE-p2 #0: Fri > Jan 13 23:13:57 MST 2006 > krinklyfig@smogmonster.local:/usr/obj/usr/src/sys/MYKERNEL60 i386 > > # dmesg | grep sk > skc0: <Marvell Gigabit Ethernet> port 0x9000-0x90ff mem > 0xec000000-0xec003fff irq 17 at device 4.0 on pci1 > skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7) > sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 > sk0: Ethernet address: 00:0e:a6:70:56:75 > > As for dual port, I also have: > > miibus0: <MII bus> on sk0 > e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseTX-FDX, auto > > ... although I haven't used that one, yet. I can try it if you like. > Yes. I'd like to know it has locking bugs on dual port handling. I'd also like to know sk(4) works on second generation chips from Marvell.(e.g. Yukon-II XL/EC/FE) > - jt -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060115040206.GB27154>