Date: Sun, 9 Jul 2006 09:06:27 GMT From: Giovanni Venturi <jumpyboy@infinito.it> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/99954: cannot install FreeBSD Message-ID: <200607090906.k6996R6o036315@www.freebsd.org> Resent-Message-ID: <200607090910.k699AE4v053234@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 99954
>Category: i386
>Synopsis: cannot install FreeBSD
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Jul 09 09:10:13 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Giovanni Venturi
>Release: 6.x
>Organization:
>Environment:
FreeBSD bastian.ksniffer.org 6.1-STABLE FreeBSD 6.1-STABLE #0: Sat Jul 8 22:24:31 CEST 2006 zambia@bastian.ksniffer.org:/usr/obj/usr/src/sys/GENERIC i386
>Description:
Till FreeBSD 5.5 I had no problem to install FreeBSD from my DVD writer. I tryed to install FreeBSD 6.0, 6.1 and snapshot-stable-6.1-june2006 but always worse. With FreeBSD 6.0 I installed FreeBSD 6.0 from a CD-R writer SCSI. But with 6.1 and 6.1 latest stable nothing. I get I/O error. I tryed also to install FreeBSD 5.5 and later to upgrade with the CVSup the source and install the kernel 6.1, but after I did this the access to the DVD writer and to the CD-R writer SCSI gets I/O error. The same problem also with 7.0 current.
My machine is and Athlon-XP, 1 master EIDE HDD, 1 serial ATA, 1 master EIDE DVD writer, 1 CD-R SCSI:
# pciconf -lv
agp0@pci0:0:0: class=0x060000 card=0x807f1043 chip=0x31891106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8377 Apollo KT400/A/600 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1981106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'ProSavageDDR P4X600 CPU to AGP Bridge'
class = bridge
subclass = PCI-PCI
skc0@pci0:9:0: class=0x020000 card=0x80eb1043 chip=0x170010b7 rev=0x12 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C940 and 3C2000 Gigabit Ethernet PCI CODEC?'
class = network
subclass = ethernet
none0@pci0:11:0: class=0x040100 card=0x80611102 chip=0x00021102 rev=0x07 hdr=0x00
vendor = 'Creative Labs'
device = 'EMU10000 Sound Blaster Live! (Also Live! 5.1) - OEM from DELL - CT4780'
class = multimedia
subclass = audio
none1@pci0:11:1: class=0x098000 card=0x00201102 chip=0x70021102 rev=0x07 hdr=0x00
vendor = 'Creative Labs'
device = 'EMU10000 Game Port'
class = input device
atapci0@pci0:15:0: class=0x010400 card=0x80ed1043 chip=0x31491106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237 VT6410 SATA RAID Controller'
class = mass storage
subclass = RAID
atapci1@pci0:15:1: class=0x01018a card=0x80ed1043 chip=0x05711106 rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
uhci0@pci0:16:0: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci1@pci0:16:1: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci2@pci0:16:2: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci3@pci0:16:3: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
ehci0@pci0:16:4: class=0x0c0320 card=0x80ed1043 chip=0x31041106 rev=0x86 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6202 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
isab0@pci0:17:0: class=0x060100 card=0x80ed1043 chip=0x32271106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237 PCI-to-ISA Bridge'
class = bridge
subclass = PCI-ISA
none2@pci0:17:5: class=0x040100 card=0x80b01043 chip=0x30591106 rev=0x60 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
class = multimedia
subclass = audio
ahc0@pci0:19:0: class=0x010000 card=0x78509004 chip=0x50789004 rev=0x03 hdr=0x00
vendor = 'Adaptec Inc'
device = 'AVA-2902I/E,AVA-2904,AVA-2910 (AIC-7850P) Fast/Wide SCSI II'
class = mass storage
subclass = SCSI
none3@pci1:0:0: class=0x030000 card=0x59601fd3 chip=0x59601002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV280 Radeon 9200 Pro'
class = display
subclass = VGA
none4@pci1:0:1: class=0x038000 card=0x59611fd3 chip=0x59401002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV280 Radeon 9200 Pro - Secondary'
class = display
a "dmesg" gets:
# dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #0: Sat Jul 8 22:24:31 CEST 2006
zambia@bastian.ksniffer.org:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 2600+ (2071.04-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 1610592256 (1535 MB)
avail memory = 1569173504 (1496 MB)
ACPI APIC Table: <ASUS A7V600 >
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ASUS A7V600> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
skc0: <3Com 3C940 Gigabit Ethernet> port 0xb800-0xb8ff mem 0xde800000-0xde803fff irq 18 at device 9.0 on pci0
skc0: 3Com Gigabit LOM (3C940) rev. (0x1)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0c:6e:8e:fa:a0
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pci0: <multimedia, audio> at device 11.0 (no driver attached)
pci0: <input device> at device 11.1 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f,0x9000-0x90ff at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8800-0x880f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0x8400-0x841f at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x8000-0x801f at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x7800-0x781f at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x7400-0x741f at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xde000000-0xde0000ff at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
ahc0: <Adaptec 2902/04/10/15/20C/30C SCSI adapter> port 0x7000-0x70ff mem 0xdd800000-0xdd800fff irq 18 at device 19.0 on pci0
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
ahc0: [GIANT-LOCKED]
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2071037256 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 28629MB <QUANTUM FIREBALLP AS30.0 A1Y.1500> at ata0-master UDMA100
acd0: DVDR <PIONEER DVD-RW DVR-110D/1.39> at ata1-master UDMA66
ad6: 194481MB <Maxtor 6L200S0 BANC1G10> at ata3-master SATA150
Waiting 5 seconds for SCSI devices to settle
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <MATSHITA CD-R CW-7502 4.17> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad0s1a
sk0: link state changed to UP
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200607090906.k6996R6o036315>