Date: Sun, 5 Mar 2006 01:27:46 -0500 (EST) From: "kalin mintchev" <kalin@el.net> To: freebsd-mobile@freebsd.org Subject: Re: winmodem driver Message-ID: <2139.148.221.147.128.1141540066.squirrel@mail.el.net>
next in thread | raw e-mail | index | archive | help
> You forgot to tell us WHICH model of ThinkPad concerns you. Modems in
> older ThinkPads, such as a T21 or A20m may be supported by the
> comms/ltmdm port.
ok... i have the ltmdm installed. i run the ltmdm.sh. nothing happens.
i load the ltmdm module manualy with kldload. it's loaded. now what?
here is what i have for a modem:
none1@pci0:31:6: class=0x070300 card=0x051a1014 chip=0x24868086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller'
class = simple comms
subclass = generic modem
the machine is a t30 thinkpad.
i also have a pcmci 3COM modem card that shows up as:
sio4: <3Com 3CXM/3CCM556> at port 0x2f8-0x2ff irq 11 function 0 config 33
on pccard0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
not sure what normal mode is. and i don't see it in the pciconf.
i have a ppp.conf which looks exactly as the one in the handbook. when is
start ppp after a while i get the propmpt and after that if i type: dial
_tag_ the machine freezes...
the pci irqs in the bios are all 11. i guess i have to make them all auto?!
i just need one of these modems... just one....
thanks for any help...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2139.148.221.147.128.1141540066.squirrel>