Date: Sun, 26 Feb 2006 01:33:21 +0100 From: Holger Kipp <hk@alogis.com> To: stable@freebsd.org Subject: Re: usb/scanimage broken on 6.1-PRERELEASE Message-ID: <20060226003321.GA69571@intserv.int1.b.intern> In-Reply-To: <20060225212457.GA65987@intserv.int1.b.intern> References: <20060225212457.GA65987@intserv.int1.b.intern>
next in thread | previous in thread | raw e-mail | index | archive | help
Problem still exists with the latest 6.1-PRERELEASE - build just finished (FreeBSD 6.1-PRERELEASE #11: Sun Feb 26 00:56:42 CET 2006). scanimage will remain in state uscnrb. Help and suggestions welcome! Regards, Holger Kipp On Sat, Feb 25, 2006 at 10:24:57PM +0100, Holger Kipp wrote: > Hello all, > > on my (A) FreeBSD 6.1-PRERELEASE #10: Tue Feb 21 04:37:53 CET 2006 > I can't access my USB-Scanner Epson 1260 any more. It does work > on my older kernels (some 5.4 from last year and a fairly recent > (B) FreeBSD 6.1-PRERELEASE #9: Mon Feb 13 15:25:40 CET 2006, > though). Dmesg of B and diff between B and A below. > > Details: > > root calling sane-find-scanner works (both A and B) > root calling scanimage -L works for B, but only once > for A (and for A I usually press ctrl-t to find out > the state scanimage is in, because it does not return): > > katrin# time scanimage -L > device `plustek:/dev/uscanner0' is a Epson Perfection 1260/Photo USB flatbed scanner > load: 0.14 cmd: scanimage 860 [runnable] 0.00u 0.00s 0% 1852k > 0.007u 0.000s 0:05.72 0.0% 0+0k 15+0io 5pf+0w > katrin# time scanimage -L > load: 0.06 cmd: scanimage 861 [runnable] 0.00u 0.00s 0% 1828k > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > 0.000u 0.006s 0:47.45 0.0% 0+0k 0+0io 0pf+0w > katrin# > > ------------------ > > This is what ps has to say about the status of scanimage > during both calls (before pressingt ctrl-t): > > katrin# ps axwl | grep scanimage > 0 841 837 0 0 0 3820 1860 uscnrb S+ p1 0:00.01 scanimage -L > katrin# > > > katrin# ps axwl | grep scanimage > 0 861 839 0 0 0 3732 1836 uscnrb I+ p1 0:00.01 scanimage -L > katrin# > > Scanning is not possible under A. > > Help would be really appreciated. Should I file a PR? > Or should I first try to upgrade to the latest -STABLE? > > Regards, > Holger Kipp > > Dmesg B: > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.1-PRERELEASE #9: Mon Feb 13 15:25:40 CET 2006 > root@katrin.hkipp.de:/usr/obj/usr/src/sys/KATRIN > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) XP 2800+ (2083.11-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow> > real memory = 536543232 (511 MB) > avail memory = 515686400 (491 MB) > ACPI APIC Table: <A M I OEMAPIC > > ioapic0: Changing APIC ID to 1 > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0 <Version 0.3> irqs 0-23 on motherboard > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <A M I OEMRSDT> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <VIA KT880 host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > atapci0: <VIA 6420 SATA150 controller> port 0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f,0xd800-0xd8ff irq 20 at device 15.0 on pci0 > ata2: <ATA channel 0> on atapci0 > ata3: <ATA channel 1> on atapci0 > atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0 > ata0: <ATA channel 0> on atapci1 > ata1: <ATA channel 1> on atapci1 > uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <VIA 83C572 USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device 16.3 on pci0 > uhci3: [GIANT-LOCKED] > usb3: <VIA 83C572 USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 21 at device 16.4 on pci0 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <VIA VT6202 USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.08, addr 2 > uhub5: multiple transaction translators > uhub5: 4 ports with 4 removable, self powered > isab0: <PCI-ISA bridge> at device 17.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <multimedia, audio> at device 17.5 (no driver attached) > vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem 0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0 > miibus0: <MII bus> on vr0 > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > vr0: Ethernet address: 00:0b:6a:c0:00:ce > acpi_button0: <Power Button> on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 > sio0: type 16550A > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1 > ums0: 5 buttons and Z dir. > uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2 > Timecounter "TSC" frequency 2083112275 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 152627MB <SAMSUNG SP1614N TM100-30> at ata0-master UDMA100 > ad1: 76351MB <SAMSUNG SP0802N TK100-24> at ata0-slave UDMA100 > acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A102> at ata1-master UDMA33 > acd1: CDRW <HL-DT-ST RW/DVD GCC-4120B/2.01> at ata1-slave PIO4 > Trying to mount root from ufs:/dev/ad0s1a > > > diff -u dmesgB dmesgA: > --- dmesg_kernel_old Sat Feb 25 21:43:41 2006 > +++ dmesg_kernel_new Sat Feb 25 21:50:16 2006 > @@ -1,7 +1,7 @@ > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > -FreeBSD 6.1-PRERELEASE #9: Mon Feb 13 15:25:40 CET 2006 > +FreeBSD 6.1-PRERELEASE #10: Tue Feb 21 04:37:53 CET 2006 > root@katrin.hkipp.de:/usr/obj/usr/src/sys/KATRIN > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) XP 2800+ (2083.11-MHz 686-class CPU) > @@ -71,7 +71,9 @@ > uhub5: 4 ports with 4 removable, self powered > isab0: <PCI-ISA bridge> at device 17.0 on pci0 > isa0: <ISA bus> on isab0 > -pci0: <multimedia, audio> at device 17.5 (no driver attached) > +pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0 > +pcm0: <C-Media Electronics CMI9761 AC97 Codec> > +pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1> > vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem 0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0 > miibus0: <MII bus> on vr0 > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > @@ -102,7 +104,7 @@ > ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1 > ums0: 5 buttons and Z dir. > uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2 > -Timecounter "TSC" frequency 2083112275 Hz quality 800 > +Timecounter "TSC" frequency 2083112413 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 152627MB <SAMSUNG SP1614N TM100-30> at ata0-master UDMA100 > ad1: 76351MB <SAMSUNG SP0802N TK100-24> at ata0-slave UDMA100 > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060226003321.GA69571>