Date: Wed, 23 Jul 2008 10:32:07 -0500 From: "Doug Poland" <wisco.disco@gmail.com> To: freebsd-mobile@freebsd.org Subject: Wireless access points: consumer, commercial, or DIY? Message-ID: <eae8cb0a0807230832w879999fj7e3001ce39fa0a0a@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello, I'm a long-time FreeBSD user (servers, desktops, laptops) and have lately become disillusioned with the quality of consumer WAPs. In my home I typically run 2 FreeBSD 7.x laptops, a Windows-based laptop, an iMac, and an iPhone. My current WAP is a Linksys WAP54G and is a little over a year old. As this device ages, it frequently locks up and drops connections. This is evident on all the wireless devices I use. Prior to this WAP, I had another WAP54G and it exhibited the same behavior, which is why I replaced it. Prior to that WAP, I had a DLink that had issues. When I connect on a FreeBSD laptop, I'm typically connecting to my fast desktop running XDMCP. In this environment, I'm particularly sensitive to dropouts and connection issues between my WAP and mobile device. My current WAP54G is getting so unreliable that I cannot run remote X and be productive, so I'm in the market to replace the Linksys WAP54G. I'm not pleased with the experience's I've had at the consumer level. I'm not well-informed about products on the commercial level, other than Cisco WAPs are $500+. I've toyed with the idea of using an old PIII and turning it into a WAP, or going with something like a Soekris net5501 and building my own. I want reliable wireless in my home. So what do I need to do, to get it? I'm not convinced there's a low-cost solution. If I have to go up to commercial quality and spend near $500, I could build my own Soekris net5501-based WAP and use FreeBSD 7.x. for $100 less. What are your thoughts, experiences, and/or recommendations? -- Regards, Doug
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?eae8cb0a0807230832w879999fj7e3001ce39fa0a0a>