Date: Mon, 27 Oct 2008 10:00:33 +0200 (SAST) From: newbie@poq.co.za To: freebsd-multimedia@freebsd.org Subject: Re: Mencoder Message-ID: <64500.192.168.2.167.1225094433.squirrel@mail.wtec.co.za> In-Reply-To: <200810242017.12118.shoesoft@gmx.net> References: <53464.192.168.2.167.1224830404.squirrel@mail.wtec.co.za> <200810242017.12118.shoesoft@gmx.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> On Friday 24 October 2008 08:40:04 newbie@poq.co.za wrote: >> Hi There >> >> I have a Brooktree chipped card. It's got 4 video inputs. >> I'm trying to record video, no audio from all 4 channels >> of the card using mencoder. I use fxtv to display video >> on the seperate channels. I get video on all of them. This >> is the command I use >> >> fxtv -disableDirectV -inputFormat paln -deviceNumber 0 >> fxtv -disableDirectV -inputFormat paln -deviceNumber 1 >> fxtv -disableDirectV -inputFormat paln -deviceNumber 2 >> fxtv -disableDirectV -inputFormat paln -deviceNumber 3 >> >> So i got video on all of them, but when I record using >> mencoder I only get video on the first device. Device >> (1,2 and 3) got no video(blue screen). But from fxtv >> it works fine. >> >> mencoder -tv >> device=/dev/bktr0,/dev/tuner0:driver=bsdbt848:width=640:height=480:norm=pal >> tv:// -o tv.avi -ovc lavc -nosound >> mencoder -tv >> device=/dev/bktr1,/dev/tuner1:driver=bsdbt848:width=640:height=480:norm=pal >> tv:// -o tv.avi -ovc lavc -nosound >> mencoder -tv >> device=/dev/bktr2,/dev/tuner2:driver=bsdbt848:width=640:height=480:norm=pal >> tv:// -o tv.avi -ovc lavc -nosound >> mencoder -tv >> device=/dev/bktr3,/dev/tuner3:driver=bsdbt848:width=640:height=480:norm=pal >> tv:// -o tv.avi -ovc lavc -nosound >> >> I have read the man pages for mencoder, but still no joy. >> Its probally a syntax problem. Can anyone please help me. > > Have you tried playing around with the "input" parameter? I needed to set > it > to 1 on my old bktr card (which had only one input though). > Yes I have, and I noticed some strange results. For Example the device parameter is completely ignored. I can change it to 99(/dev/bktr99), and will still run. And mplayer will always display (/dev/bktr0) video. It's must be ignoring the device input, I'm not sure what i'm doing wrong. mplayer -tv device=/dev/bktr1,tuner=/dev/tuner1:driver=bsdbt848:input=1:chanlist=europe-west tv:// mplayer -tv device=/dev/bktr3:driver=bsdbt848:input=1:chanlist=europe-west tv:// This is the latest port versions installed gmencoder-0.1.0_10 mplayer-0.99.11_8 mplayer-skins-1.1.2_6 Thanks lou
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?64500.192.168.2.167.1225094433.squirrel>