Date: Mon, 5 May 2008 11:07:12 GMT From: FreeBSD bugmaster <bugmaster@FreeBSD.org> To: freebsd-scsi@FreeBSD.org Subject: Current problem reports assigned to freebsd-scsi@FreeBSD.org Message-ID: <200805051107.m45B7CcC070836@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/39388 scsi ncr/sym drivers fail with 53c810 and more than 256MB m o kern/40895 scsi wierd kernel / device driver bug o kern/52638 scsi [panic] SCSI U320 on SMP server won't run faster than s kern/57398 scsi [mly] Current fails to install on mly(4) based RAID di o kern/60598 scsi wire down of scsi devices conflicts with config o kern/60641 scsi [sym] Sporadic SCSI bus resets with 53C810 under load s kern/61165 scsi [panic] kernel page fault after calling cam_send_ccb o kern/74627 scsi [ahc] [hang] Adaptec 2940U2W Can't boot 5.3 o kern/90282 scsi [sym] SCSI bus resets cause loss of ch device o kern/92798 scsi [ahc] SCSI problem with timeouts o kern/94838 scsi Kernel panic while mounting SD card with lock switch o o kern/99954 scsi [ahc] reading from DVD failes on 6.x [regression] o kern/110847 scsi [ahd] Tyan U320 onboard problem with more than 3 disks o kern/120247 scsi [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s 14 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/35234 scsi World access to /dev/pass? (for scanner) requires acce o kern/38828 scsi [dpt] [request] DPT PM2012B/90 doesn't work o kern/44587 scsi dev/dpt/dpt.h is missing defines required for DPT_HAND o kern/76178 scsi [ahd] Problem with ahd and large SCSI Raid system o kern/114597 scsi [sym] System hangs at SCSI bus reset with dual HBAs o kern/119668 scsi [cam] [patch] certain errors are too verbose comparing o kern/120487 scsi [sg] scsi_sg incompatible with scanners o sparc/121676 scsi [iscsi] iscontrol do not connect iscsi-target on sparc 8 problems total.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200805051107.m45B7CcC070836>