Date: Sat, 10 Oct 2009 22:27:41 -0700 From: Ted Faber <faber@isi.edu> To: freebsd-current@freebsd.org Subject: 80RC1 can't find onboard Intel PRO (pciconf & dmesg attached) Message-ID: <20091011052741.GA46868@zod.isi.edu>
next in thread | raw e-mail | index | archive | help
--iFRdW5/EC4oqxDHL Content-Type: multipart/mixed; boundary="KFztAG8eRSV9hGtP" Content-Disposition: inline --KFztAG8eRSV9hGtP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable I have an Intel DP55WB motherboard that claims to have an Intel PRO 10/100/1000 device on it, but FreeBSD isn't detecting it properly. I've attached a pciconf -l and verbose dmesg. I think the offender had a PCI ID of 10F08086, which http://www.clavister.com/support/utilities/vendors.txt thinks is an Interl Ethernet as well. I tried just adding that ID to the table in /sys/dev/e1000/if_em.c, but that was insufficient. I'm happy to try patches. Thanks! --=20 Ted Faber http://www.isi.edu/~faber PGP: http://www.isi.edu/~faber/pubkeys.= asc Unexpected attachment on this mail? See http://www.isi.edu/~faber/FAQ.html#= SIG --KFztAG8eRSV9hGtP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Content-Transfer-Encoding: quoted-printable ugen1.4: <vendor 0x0781> at usbus1 umass0: <vendor 0x0781 product 0x5406, class 0/0, rev 2.00/2.00, addr 4> on= usbus1 umass0: SCSI over Bulk-Only; quirks =3D 0x0000 umass0:1:0:-1: Attached to scbus1 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk Cruzer 7.01> Removable Direct Access SCSI-0 device=20 da0: 40.000MB/s transfers da0: 955MB (1957887 512 byte sectors: 64H 32S/T 955C) (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0=20 (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition (probe0:umass-sim0:0:0:1): UNIT ATTENTION asc:29,0 (probe0:umass-sim0:0:0:1): Power on, reset, or bus device reset occurred (probe0:umass-sim0:0:0:1): Retrying Command (per Sense Data) (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0=20 (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition (probe0:umass-sim0:0:0:1): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:1): Medium not present (probe0:umass-sim0:0:0:1): Unretryable error cd0 at umass-sim0 bus 0 target 0 lun 1 cd0: <SanDisk Cruzer 7.01> Removable CD-ROM SCSI-0 device=20 cd0: 40.000MB/s transfers cd0: cd present [32767 x 2048 byte records] GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. ugen1.4: <vendor 0x0781> at usbus1 (disconnected) umass0: at uhub3, port 2, addr 4 (disconnected) (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry (cd0:umass-sim0:0:0:1): lost device (cd0:umass-sim0:0:0:1): removing device entry (cd0:umass-sim0:0:0:1): removing changer entry Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...2 2 2 2 0 0 done All buffers synced. Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RC1 #14: Sat Oct 10 22:14:36 PDT 2009 root@ylum.lunabase.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0fef000. Preloaded elf module "/boot/kernel/geom_mirror.ko" at 0xc0fef234. Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc0fef2e4. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0fef394. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2666776980 Hz CPU: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (2666.78-MHz 686-class= CPU) Origin =3D "GenuineIntel" Id =3D 0x106e5 Stepping =3D 5 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xT= PR,PDCM,SSE4.1,SSE4.2,POPCNT> AMD Features=3D0x28100000<NX,RDTSCP,LM> AMD Features2=3D0x1<LAHF> TSC: P-state invariant Data TLB: 4 KB pages, 4-way set associative, 64 entries Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 256 kbytes, 8-way associative, 64 bytes/line real memory =3D 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000008dfff, 577536 bytes (141 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001026000 - 0x00000000db73ffff, 3664879616 bytes (894746 pages) 0x00000000df6bf000 - 0x00000000df6e4fff, 155648 bytes (38 pages) 0x00000000df7bf000 - 0x00000000df7d7fff, 102400 bytes (25 pages) avail memory =3D 3663699968 (3493 MB) Table 'FACP' at 0xdf7fc000 Table 'APIC' at 0xdf7f7000 MADT: Found table at 0xdf7f7000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: disabled MADT: Found CPU APIC ID 2 ACPI ID 2: enabled SMP: Added CPU 2 (AP) MADT: Found CPU APIC ID 3 ACPI ID 3: disabled MADT: Found CPU APIC ID 4 ACPI ID 4: enabled SMP: Added CPU 4 (AP) MADT: Found CPU APIC ID 5 ACPI ID 5: disabled MADT: Found CPU APIC ID 6 ACPI ID 6: enabled SMP: Added CPU 6 (AP) MADT: Found CPU APIC ID 7 ACPI ID 7: disabled ACPI APIC Table: <INTEL WBIBX10J> INTR: Adding local APIC 2 as a target INTR: Adding local APIC 4 as a target INTR: Adding local APIC 6 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 pnpbios: Found PnP BIOS data at 0xc00fe0e0 pnpbios: Entry =3D f0000:ba00 Rev =3D 1.0 pnpbios: OEM ID 8224744e Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 4 APIC: CPU 3 has ACPI ID 6 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0xfe020 00024 (v2 INTEL ) ACPI: XSDT 0xdf7fd120 0006C (v1 INTEL WBIBX10J 0000007A 01000013) ACPI: FACP 0xdf7fc000 000F4 (v3 INTEL WBIBX10J 0000007A MSFT 0100000D) ACPI: DSDT 0xdf7f8000 03432 (v2 INTEL WBIBX10J 0000007A MSFT 0100000D) ACPI: FACS 0xdf76c000 00040 ACPI: APIC 0xdf7f7000 000BC (v2 INTEL WBIBX10J 0000007A MSFT 0100000D) ACPI: WDDT 0xdf7f6000 00040 (v1 INTEL WBIBX10J 0000007A MSFT 0100000D) ACPI: MCFG 0xdf7f5000 0003C (v1 INTEL WBIBX10J 0000007A MSFT 0100000D) ACPI: ASF! 0xdf7f4000 000A5 (v32 INTEL WBIBX10J 0000007A MSFT 0100000D) ACPI: HPET 0xdf7f3000 00038 (v1 INTEL WBIBX10J 0000007A MSFT 0100000D) ACPI: ASPT 0xdf7f1000 00034 (v5 INTEL WBIBX10J 0000007A MSFT 0100000D) ACPI: WDTT 0xdf7f0000 00224 (v2 INTEL WBIBX10J 0000007A MSFT 0100000D) ACPI: SSDT 0xdf7e9000 06F74 (v1 INTEL SSDT PM 0000007A MSFT 0100000D) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 8 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: level lapic0: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 1 lapic2: Routing NMI -> LINT1 lapic2: LINT1 trigger: level lapic2: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 3 lapic4: Routing NMI -> LINT1 lapic4: LINT1 trigger: level lapic4: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 5 lapic6: Routing NMI -> LINT1 lapic6: LINT1 trigger: level lapic6: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger cpu0 BSP: ID: 0x00000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_ra= te_min=3D1 feeder_rate_max=3D2016000 feeder_rate_round=3D25 wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 npx0: INT 16 interface acpi0: <INTEL WBIBX10J> on motherboard PCIe: Memory Mapped configuration base @ 0xf8000000 pcibios: No call entry point ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.GFX0.IGDP -> bus 0 dev 2 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xc6c59000 pa 0x1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 7 9 10 11 12 Validation 0 9 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 Validation 0 255 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12 Validation 0 10 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12 Validation 0 10 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 Validation 0 255 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 7 9 10 11 12 Validation 0 9 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp= i0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 7 hz: 14318180 opts: legacy_route 64= -bit Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0xd131, revid=3D0x11 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0xd138, revid=3D0x11 domain=3D0, bus=3D0, slot=3D3, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks found-> vendor=3D0x8086, dev=3D0xd155, revid=3D0x11 domain=3D0, bus=3D0, slot=3D8, func=3D0 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0xd156, revid=3D0x11 domain=3D0, bus=3D0, slot=3D8, func=3D1 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0xd157, revid=3D0x11 domain=3D0, bus=3D0, slot=3D8, func=3D2 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0xd158, revid=3D0x11 domain=3D0, bus=3D0, slot=3D8, func=3D3 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0xd150, revid=3D0x11 domain=3D0, bus=3D0, slot=3D16, func=3D0 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0xd151, revid=3D0x11 domain=3D0, bus=3D0, slot=3D16, func=3D1 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x10f0, revid=3D0x05 domain=3D0, bus=3D0, slot=3D25, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xe2100000, size 17, enabled map[14]: type Memory, range 32, base 0xe2124000, size 12, enabled map[18]: type I/O Port, range 32, base 0x1020, size 5, enabled pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 20 found-> vendor=3D0x8086, dev=3D0x3b3c, revid=3D0x05 domain=3D0, bus=3D0, slot=3D26, func=3D0 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D9 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe2125400, size 10, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x3b56, revid=3D0x05 domain=3D0, bus=3D0, slot=3D27, func=3D0 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe2120000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=3D0x8086, dev=3D0x3b42, revid=3D0x05 domain=3D0, bus=3D0, slot=3D28, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=3D0x8086, dev=3D0x3b4a, revid=3D0x05 domain=3D0, bus=3D0, slot=3D28, func=3D4 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=3D0x8086, dev=3D0x3b4e, revid=3D0x05 domain=3D0, bus=3D0, slot=3D28, func=3D6 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=3D0x8086, dev=3D0x3b34, revid=3D0x05 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D9 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe2125000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0xa5 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x18 (6000 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x3b02, revid=3D0x05 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x3b20, revid=3D0x05 domain=3D0, bus=3D0, slot=3D31, func=3D2 class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D10 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x1098, size 3, enabled map[14]: type I/O Port, range 32, base 0x10ac, size 2, enabled map[18]: type I/O Port, range 32, base 0x1090, size 3, enabled map[1c]: type I/O Port, range 32, base 0x10a8, size 2, enabled map[20]: type I/O Port, range 32, base 0x1070, size 4, enabled map[24]: type I/O Port, range 32, base 0x1060, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=3D0x8086, dev=3D0x3b30, revid=3D0x05 domain=3D0, bus=3D0, slot=3D31, func=3D3 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D10 map[10]: type Memory, range 64, base 0xe2125800, size 8, enabled map[20]: type I/O Port, range 32, base 0x1000, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x3b26, revid=3D0x05 domain=3D0, bus=3D0, slot=3D31, func=3D5 class=3D01-01-85, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D10 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x1088, size 3, enabled map[14]: type I/O Port, range 32, base 0x10a4, size 2, enabled map[18]: type I/O Port, range 32, base 0x1080, size 3, enabled map[1c]: type I/O Port, range 32, base 0x10a0, size 2, enabled map[20]: type I/O Port, range 32, base 0x1050, size 4, enabled map[24]: type I/O Port, range 32, base 0x1040, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x0-0x0 pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 pci0: <base peripheral> at device 8.0 (no driver attached) pci0: <base peripheral> at device 8.1 (no driver attached) pci0: <base peripheral> at device 8.2 (no driver attached) pci0: <base peripheral> at device 8.3 (no driver attached) pci0: <base peripheral> at device 16.0 (no driver attached) pci0: <base peripheral> at device 16.1 (no driver attached) pci0: <network, ethernet> at device 25.0 (no driver attached) ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe2125400-0xe21257ff irq 16= at device 26.0 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe2125400 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus0: waiting for BIOS to give up control usbus0: EHCI version 1.0 usbus0: <EHCI (generic) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=3D0, physical bus=3D3 pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x0-0x0 pcib4: no prefetched decode pci4: <ACPI PCI bus> on pcib4 pci4: domain=3D0, physical bus=3D4 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe2125000-0xe21253ff irq 23= at device 29.0 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe2125000 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 50 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus1: waiting for BIOS to give up control usbus1: EHCI version 1.0 usbus1: <EHCI (generic) USB 2.0 controller> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xe1000000-0xe20fffff pcib5: prefetched decode 0xe0000000-0xe0ffffff pcib5: Subtractively decoded bridge. pci5: <ACPI PCI bus> on pcib5 pci5: domain=3D0, physical bus=3D5 found-> vendor=3D0x12d2, dev=3D0x0018, revid=3D0x10 domain=3D0, bus=3D5, slot=3D1, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 (250 ns) intpin=3Da, irq=3D11 map[10]: type Memory, range 32, base 0xe1000000, size 24, enabled pcib5: requested memory range 0xe1000000-0xe1ffffff: good map[14]: type Prefetchable Memory, range 32, base 0xe0000000, size 24, ena= bled pcib5: requested memory range 0xe0000000-0xe0ffffff: good pcib5: matched entry for 5.1.INTA pcib5: slot 1 INTA hardwired to IRQ 22 found-> vendor=3D0x104c, dev=3D0x8023, revid=3D0x00 domain=3D0, bus=3D5, slot=3D3, func=3D0 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0016, statreg=3D0x0210, cachelnsz=3D16 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xe2004000, size 11, enabled pcib5: requested memory range 0xe2004000-0xe20047ff: good map[14]: type Memory, range 32, base 0xe2000000, size 14, enabled pcib5: requested memory range 0xe2000000-0xe2003fff: good vgapci0: <VGA-compatible display> mem 0xe1000000-0xe1ffffff,0xe0000000-0xe0= ffffff irq 22 at device 1.0 on pci5 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe2004000-0xe20047ff,0xe20000= 00-0xe2003fff at device 3.0 on pci5 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe2004000 pcib5: matched entry for 5.3.INTA pcib5: slot 3 INTA hardwired to IRQ 19 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 51 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=3D0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:90:27:00:02:53:d6:7f fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x128c000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:90:27:53:d6:7f fwe0: bpf attached fwe0: Ethernet address: 02:90:27:53:d6:7f fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:90:27:00:02:53:d6:7f @ 0xfffe00000000, S400, ma= xrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D1, CYCLEMAS= TER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ATA controller> port 0x1098-0x109f,0x10ac-0x10af,0x1090-0x1= 097,0x10a8-0x10ab,0x1070-0x107f,0x1060-0x106f irq 19 at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1070 atapci0: [MPSAFE] atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1098 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x10ac ata2: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata2: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata2: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata2: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1090 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x10a8 ata3: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: stat1=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata3: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata3: [MPSAFE] ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci1: <Intel ATA controller> port 0x1088-0x108f,0x10a4-0x10a7,0x1080-0x1= 087,0x10a0-0x10a3,0x1050-0x105f,0x1040-0x104f irq 19 at device 31.5 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1050 atapci1: [MPSAFE] atapci1: [ITHREAD] ata4: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1088 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x10a4 ata4: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: stat1=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata4: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1080 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x10a0 ata5: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: stat1=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata5: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata5: [MPSAFE] ata5: [ITHREAD] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: Invalid id16 (set, cur) =3D (19, 20) est0: Invalid freq 2527, ignored. est0: Invalid id16 (set, cur) =3D (18, 20) est0: Invalid freq 2394, ignored. est0: Invalid id16 (set, cur) =3D (17, 20) est0: Invalid freq 2261, ignored. est0: Invalid id16 (set, cur) =3D (16, 20) est0: Invalid freq 2128, ignored. est0: Invalid id16 (set, cur) =3D (15, 20) est0: Invalid freq 1995, ignored. est0: Invalid id16 (set, cur) =3D (14, 20) est0: Invalid freq 1862, ignored. est0: Invalid id16 (set, cur) =3D (13, 20) est0: Invalid freq 1729, ignored. est0: Invalid id16 (set, cur) =3D (12, 20) est0: Invalid freq 1596, ignored. est0: Invalid id16 (set, cur) =3D (11, 20) est0: Invalid freq 1463, ignored. est0: Invalid id16 (set, cur) =3D (10, 20) est0: Invalid freq 1330, ignored. est0: Invalid id16 (set, cur) =3D (9, 20) est0: Invalid freq 1197, ignored. p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 device_attach: acpi_perf1 attach returned 6 device_attach: acpi_perf1 attach returned 6 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 14 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est2: Invalid id16 (set, cur) =3D (19, 20) est2: Invalid freq 2527, ignored. est2: Invalid id16 (set, cur) =3D (18, 20) est2: Invalid freq 2394, ignored. est2: Invalid id16 (set, cur) =3D (17, 20) est2: Invalid freq 2261, ignored. est2: Invalid id16 (set, cur) =3D (16, 20) est2: Invalid freq 2128, ignored. est2: Invalid id16 (set, cur) =3D (15, 20) est2: Invalid freq 1995, ignored. est2: Invalid id16 (set, cur) =3D (14, 20) est2: Invalid freq 1862, ignored. est2: Invalid id16 (set, cur) =3D (13, 20) est2: Invalid freq 1729, ignored. est2: Invalid id16 (set, cur) =3D (12, 20) est2: Invalid freq 1596, ignored. est2: Invalid id16 (set, cur) =3D (11, 20) est2: Invalid freq 1463, ignored. est2: Invalid id16 (set, cur) =3D (10, 20) est2: Invalid freq 1330, ignored. est2: Invalid id16 (set, cur) =3D (9, 20) est2: Invalid freq 1197, ignored. p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 device_attach: acpi_perf3 attach returned 6 device_attach: acpi_perf3 attach returned 6 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 14 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() isa_probe_children: disabling PnP devices pmtimer0 on isa0 atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0x= c9fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 52 ata0: [MPSAFE] ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 53 ata1: [MPSAFE] ata1: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> failed to probe at port 0x60,0x64 on= isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 230093 -> 100000 procfs registered lapic: Divisor 2, Frequency 66669425 hz Timecounter "TSC" frequency 2666776980 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00000000 ata0: New devices: 00000000 ata1: Identifying devices: 00000000firewire0: 1 nodes, maxhop <=3D 0 cable = IRM irm(0) (me)=20 firewire0: bus manager 0=20 ata1: New devices: 00000000 ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire ad4: 476940MB <WDC WD5000AACS-00G8B1 05.04C05> at ata2-master UDMA33 ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ad4: Intel check1 failedGEOM_MIRROR: Device mirror/gm0 launched (1/1). ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000000 ata3: New devices: 00000000 ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 GEOM: ad4s1: geometry does not match label (255h,63s !=3D 16h,63s). uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on = usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on = usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: <Unicomp> at usbus0 ukbd0: <HID Keyboard> on usbus0 kbd0 at ukbd0 kbd0: ukbd0, generic (0), config:0x0, flags:0x3d0000 ugen1.3: <EPSON> at usbus1 ulpt0: <EPSON USB Printer, class 0/0, rev 1.10/1.00, addr 3> on usbus1 ulpt0: using bi-directional mode (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error ATA PseudoRAID loaded lapic6: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 lapic4: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 lapic2: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 2 vector 48 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 4 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 6 vector 48 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 49 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 ugen0.4: <Logitech> at usbus0 ums0: <Logitech USB-PS/2 Trackball, class 0/0, rev 1.00/2.00, addr 4> on us= bus0 ums0: 3 buttons and [XYZ] coordinates ID=3D0 Trying to mount root from ufs:/dev/mirror/gm0s1a ct_to_ts([2009-10-11 05:16:55]) =3D 1255238215.000000000 start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwar= ding disabled, default to deny, logging disabled splash: image decoder found: green_saver link_elf: symbol callout_reset undefined --KFztAG8eRSV9hGtP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=pciconf hostb0@pci0:0:0:0: class=0x060000 card=0x00008086 chip=0xd1318086 rev=0x11 hdr=0x00 pcib1@pci0:0:3:0: class=0x060400 card=0x00008086 chip=0xd1388086 rev=0x11 hdr=0x01 none0@pci0:0:8:0: class=0x088000 card=0x00000000 chip=0xd1558086 rev=0x11 hdr=0x00 none1@pci0:0:8:1: class=0x088000 card=0x00000000 chip=0xd1568086 rev=0x11 hdr=0x00 none2@pci0:0:8:2: class=0x088000 card=0x00000000 chip=0xd1578086 rev=0x11 hdr=0x00 none3@pci0:0:8:3: class=0x088000 card=0x00000000 chip=0xd1588086 rev=0x11 hdr=0x00 none4@pci0:0:16:0: class=0x088000 card=0x00000000 chip=0xd1508086 rev=0x11 hdr=0x00 none5@pci0:0:16:1: class=0x088000 card=0x00000000 chip=0xd1518086 rev=0x11 hdr=0x00 none6@pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x10f08086 rev=0x05 hdr=0x00 ehci0@pci0:0:26:0: class=0x0c0320 card=0x42578086 chip=0x3b3c8086 rev=0x05 hdr=0x00 none7@pci0:0:27:0: class=0x040300 card=0x00348086 chip=0x3b568086 rev=0x05 hdr=0x00 pcib2@pci0:0:28:0: class=0x060400 card=0x42578086 chip=0x3b428086 rev=0x05 hdr=0x01 pcib3@pci0:0:28:4: class=0x060400 card=0x42578086 chip=0x3b4a8086 rev=0x05 hdr=0x01 pcib4@pci0:0:28:6: class=0x060400 card=0x42578086 chip=0x3b4e8086 rev=0x05 hdr=0x01 ehci1@pci0:0:29:0: class=0x0c0320 card=0x42578086 chip=0x3b348086 rev=0x05 hdr=0x00 pcib5@pci0:0:30:0: class=0x060401 card=0x42578086 chip=0x244e8086 rev=0xa5 hdr=0x01 isab0@pci0:0:31:0: class=0x060100 card=0x42578086 chip=0x3b028086 rev=0x05 hdr=0x00 atapci0@pci0:0:31:2: class=0x01018f card=0x42578086 chip=0x3b208086 rev=0x05 hdr=0x00 none8@pci0:0:31:3: class=0x0c0500 card=0x42578086 chip=0x3b308086 rev=0x05 hdr=0x00 atapci1@pci0:0:31:5: class=0x010185 card=0x42578086 chip=0x3b268086 rev=0x05 hdr=0x00 vgapci0@pci0:5:1:0: class=0x030000 card=0x10921092 chip=0x001812d2 rev=0x10 hdr=0x00 fwohci0@pci0:5:3:0: class=0x0c0010 card=0x42578086 chip=0x8023104c rev=0x00 hdr=0x00 --KFztAG8eRSV9hGtP-- --iFRdW5/EC4oqxDHL Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.13 (FreeBSD) iEYEARECAAYFAkrRbM0ACgkQaUz3f+Zf+XufBwCgqL3MTzyXtrDNrIWZxI3o/x1A 3pkAoP4hrfRXobbW8mYDLkZWe1NvSL2C =ycDc -----END PGP SIGNATURE----- --iFRdW5/EC4oqxDHL--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091011052741.GA46868>