Date: Mon, 9 Nov 2009 14:01:15 +0200 From: Sergey Golovchenko <ibis@datasvit.net> To: freebsd-isp@freebsd.org Subject: Re: That is the most heavy-loaded FreeBSD-router at your network? Message-ID: <20091109140115.3955e40b@haron> In-Reply-To: <1163595169.20091106172454@homelink.ru> References: <1163595169.20091106172454@homelink.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
=D0=92 Fri, 6 Nov 2009 17:24:54 +0300 Dennis Yusupoff <dyr@homelink.ru> =D0=BF=D0=B8=D1=88=D0=B5=D1=82: > Good day all! >=20 > I'm looking for information what is the most pps/Mbits-powerful > FreeBSD-based routers used in real world in ISP networks. >=20 > For example, we have regular traffic up to 60kpps and 200MBits, with > confirmed tests at 300kpps and 600Mbits and router with ng_netflow, > dummynet and ipfw + pf (Bi-)NAT. > There are some examples at russian forum http://forum.nag.ru about > 1.3Mpps (yep, MILLION and dot 3 packets per second). > How much have you got? > That is a hardware? > Did you try to tune sysctl? >=20 >=20 120kpps, 650Mbit/s pf NAT CPU: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (1997.01-MHz K8-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6f6 Stepping =3D 6 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x4e33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,D= CA> AMD Features=3D0x20100800<SYSCALL,NX,LM> AMD Features2=3D0x1<LAHF> Cores per package: 2 usable memory =3D 2139934720 (2040 MB) avail memory =3D 2063695872 (1968 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xdc200000-0xdc20ffff irq 16 at device 0.0 on pci19 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:18:fe:fa:52:7e bge0: [ITHREAD] pcib11: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci20: <ACPI PCI bus> on pcib11 bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xdc300000-0xdc30ffff irq 17 at device 0.0 on pci20 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:18:fe:fa:52:7f bge1: [ITHREAD] --=20 WBR, Sergey Golovchenko ISP XTC system administrator
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091109140115.3955e40b>