Date: Sun, 24 Jan 2010 16:02:37 GMT From: sng <piokud84@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/143173: Promise FastTrack TX4 + sata DVD, instalator can't mount cd and install system Message-ID: <201001241602.o0OG2bEr093260@www.freebsd.org> Resent-Message-ID: <201001241610.o0OGA2I8001084@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 143173 >Category: amd64 >Synopsis: Promise FastTrack TX4 + sata DVD, instalator can't mount cd and install system >Confidential: no >Severity: non-critical >Priority: high >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jan 24 16:10:01 UTC 2010 >Closed-Date: >Last-Modified: >Originator: sng >Release: AMD64 8.0- STABLE >Organization: >Environment: >Description: I was going to install FreeBSD on machine with Promise FastTrack TX4 and SATA DVD (Plextor PX-810SA) connected to it. CD is booting, but im getting this error: ata2: SIGNATURE: eb140101 ata2: SIGNATURE: ffffffff acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: CDROM <PLEXTOR DVDR PX-810SA/1.00> at ata2-master SATA150 acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command Im getting sysinstall menu, I can set partitions and so on but instlator can't mount cd and install system on HDD. I had to install from net or UBS stick. Full DMESG: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Dual Core AMD Opteron(tm) Processor 285 SE (2588.98-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x3<LAHF,CMP> real memory = 8589934592 (8192 MB) avail memory = 7712686080 (7355 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 2 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard kbd1 at kbdmux0 acpi0: <A M I OEMXSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, ddf00000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfec01000-0xfec013ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ohci0: <OHCI (generic) USB controller> mem 0xff3ed000-0xff3edfff irq 19 at device 0.0 on pci1 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xff3ee000-0xff3eefff irq 19 at device 0.1 on pci1 ohci1: [ITHREAD] usbus1: <OHCI (generic) USB controller> on ohci1 pci1: <network> at device 4.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 7.2 (no driver attached) pci0: <bridge> at device 7.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 2.0 on pci2 pci3: <PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xe0000000-0xefffffff,0xff4f0000-0xff4fffff irq 26 at device 0.0 on pci3 pci3: <multimedia, HDA> at device 0.1 (no driver attached) pci2: <multimedia, audio> at device 3.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci4: <ACPI PCI bus> on pcib4 atapci1: <Promise PDC40718 SATA300 controller> port 0xbc00-0xbc7f,0xb800-0xb8ff mem 0xff5ff000-0xff5fffff,0xff5c0000-0xff5dffff irq 29 at device 1.0 on pci4 atapci1: [ITHREAD] atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: SIGNATURE: eb140101 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: SIGNATURE: 00000101 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci1 ata5: SIGNATURE: 00000101 ata5: [ITHREAD] acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 powernow0: <Cool`n'Quiet K8> on cpu0 device_attach: powernow0 attach returned 6 cpu1: <ACPI CPU> on acpi0 powernow1: <Cool`n'Quiet K8> on cpu1 device_attach: powernow1 attach returned 6 cpu2: <ACPI CPU> on acpi0 powernow2: <Cool`n'Quiet K8> on cpu2 device_attach: powernow2 attach returned 6 cpu3: <ACPI CPU> on acpi0 powernow3: <Cool`n'Quiet K8> on cpu3 device_attach: powernow3 attach returned 6 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xd3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <AMD> at usbus0 uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <AMD> at usbus1 uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered ugen1.2: <Logitech> at usbus1 ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/49.00, addr 2> on usbus1 ums0: 16 buttons and [XYZ] coordinates ID=0 uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/49.00, addr 2> on usbus1 ata2: SIGNATURE: eb140101 ata2: SIGNATURE: ffffffff acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: CDROM <PLEXTOR DVDR PX-810SA/1.00> at ata2-master SATA150 acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command ad6: 152627MB <MAXTOR STM3160811AS 3.AAE> at ata3-master SATA150 ad10: 152627MB <MAXTOR STM3160811AS 3.AAE> at ata5-master SATA150 SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Trying to mount root from ufs:/dev/ad10s1a >How-To-Repeat: Connect sata dvd to PCI Promise FastTrack TX4 controler- that do the magic... >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201001241602.o0OG2bEr093260>