Date: Sun, 19 Dec 2010 14:58:55 +0100 From: Miroslav Lachman <000.fbsd@quip.cz> To: freebsd-usb@FreeBSD.org Subject: GSM modem Siemens ES75 is not working in 8.1 Message-ID: <4D0E0F9F.2020306@quip.cz>
next in thread | raw e-mail | index | archive | help
Hi, I have GSM modem Siemens ES75 connected by USB cable to machine running FreeBSD 8.1-RELEASE amd64 GENERIC. As I found on the web, this modem was working on an older releases. But mine is not properly recognized: Unknown USB device: vendor 0x0681 product 0x0034 bus uhub1 I want to use this modem with SMS Server Tools. Device details: # usbconfig ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen4.2: <USB Flash Drive G & T> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.2: <USB Keyboard vendor 0x04d9> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen4.3: <USB2.0-CRW Generic> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen1.2: <MC75 Siemens AG Wireless Modules> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON # usbconfig -d ugen1.2 dump_device_desc ugen1.2: <MC75 Siemens AG Wireless Modules> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0002 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x0681 idProduct = 0x0034 bcdDevice = 0x0000 iManufacturer = 0x0001 <Siemens AG Wireless Modules> iProduct = 0x0002 <MC75> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 # usbconfig -d ugen1.2 reset usbconfig: could not reset device: Device not configured # tail -f /var/log/messages Dec 19 13:58:56 dca-ntbox kernel: usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT Dec 19 13:58:58 dca-ntbox kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) Dec 19 13:58:58 dca-ntbox kernel: usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_STALLED Dec 19 13:59:03 dca-ntbox kernel: ugen1.2: <Siemens AG Wireless Modules> at usbus1 (disconnected) Dec 19 13:59:06 dca-ntbox root: Unknown USB device: vendor 0x0681 product 0x0034 bus uhub1 Dec 19 13:59:06 dca-ntbox kernel: ugen1.2: <Siemens AG Wireless Modules> at usbus1 There is no /dev/cuau device entry # ll /dev | egrep 'cua|tty' crw-rw-rw- 1 root wheel 0, 11 Dec 19 12:01 ctty crw------- 1 root wheel 0, 38 Dec 19 12:01 ttyv0 crw------- 1 root wheel 0, 39 Dec 19 12:01 ttyv1 crw------- 1 root wheel 0, 40 Dec 19 12:01 ttyv2 crw------- 1 root wheel 0, 41 Dec 19 12:01 ttyv3 crw------- 1 root wheel 0, 42 Dec 19 12:01 ttyv4 crw------- 1 root wheel 0, 43 Dec 19 12:01 ttyv5 crw------- 1 root wheel 0, 44 Dec 19 12:01 ttyv6 crw------- 1 root wheel 0, 45 Dec 19 12:01 ttyv7 crw------- 1 root wheel 0, 46 Dec 19 12:01 ttyv8 crw------- 1 root wheel 0, 47 Dec 19 12:01 ttyv9 crw------- 1 root wheel 0, 48 Dec 19 12:01 ttyva crw------- 1 root wheel 0, 49 Dec 19 12:01 ttyvb crw------- 1 root wheel 0, 50 Dec 19 12:01 ttyvc crw------- 1 root wheel 0, 51 Dec 19 12:01 ttyvd crw------- 1 root wheel 0, 52 Dec 19 12:01 ttyve crw------- 1 root wheel 0, 53 Dec 19 12:01 ttyvf Can somebody tell me if it is HW problem or if I need to do some tweaks / add USB quirks? Thanks in advance Miroslav Lachman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D0E0F9F.2020306>