Date: Sun, 20 Nov 2011 23:57:40 GMT From: "David J. Weller-Fahy" <dave-freebsd-gnats@weller-fahy.com> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/162708: FreeBSD 9.0-RC2 amd64 fails to boot on Dell Optiplex GX620 Message-ID: <201111202357.pAKNveDp080987@red.freebsd.org> Resent-Message-ID: <201111210000.pAL00ULW095935@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 162708 >Category: amd64 >Synopsis: FreeBSD 9.0-RC2 amd64 fails to boot on Dell Optiplex GX620 >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Nov 21 00:00:29 UTC 2011 >Closed-Date: >Last-Modified: >Originator: David J. Weller-Fahy >Release: FreeBSD 9.0-RC2 amd64 >Organization: >Environment: Unable to uname -a (installing). Dell Optiplex GX620 Pentium 4 model # 521 2.8 GHz 4 GB memory (DDR2) >Description: When trying to boot from the FreeBSD ISO at ftp://ftp.freebsd.org/pub/FreeBSD/releases/amd64/amd64/ISO-IMAGES/9.0/FreeBSD-9.0-RC2-amd64-dvd1.iso I am unable to boot with ACPI enabled or disabled. When enabled the machine freezes with the following messages being the last before the freeze (this is after pressing enter at the CD's boot prompt). #v+ .. hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 #v- In verbose mode it freezes with the last messages as follows. #v+ .. pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 21 pcib0: allocated type 3 (0xdf700000-0xdf7003ff) for rid 10 of pci0:0:29:7 unknown: Lazy allocation of 0x400 bytes rid 0x10 type 3 at 0xdf700000 #v- Once the machine freezes the only way to restart is to hold the power button in until the machine turns off, then turn it on (USB keyboard is unresponsive). I've waited over 15 minutes without response. If I disable ACPI then I get a different message (follows - only the verbose version). #v+ atrtc0: Can't map interrupt attimer0: <AT timer> at port 0x40 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 atttimer0: Can't map interrupt fdc0: cannot reserve interrupt line fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. procfs registered panic: No usable event timer found! cpuid = 0 KDB stack backtrace: #0 0xffffffff80867e4e at kdb_backtrace+0x5e #1 0xffffffff80832ab7 at panic+0x187 #2 0xffffffff80b5250b at cpu_initclocks_bsp+0x3cb #3 0xffffffff807e9ec0 at initclocks+0x20 #4 0xffffffff807e7507 at mi_startup+0x77 #5 0xffffffff8029f6ec at btext+0x2c Uptime: 1s Automated reboot in 15 seconds - press a key on the console to abort #v- I'm not sure where to proceed from here. Please let me know if you need more information. >How-To-Repeat: Boot from the amd64 9.0-RC2 cd. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201111202357.pAKNveDp080987>