Date: Sun, 30 Jan 2011 01:54:00 +0100 From: Damien Fleuriot <ml@my.gd> To: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> Cc: "freebsd-hackers@freebsd.org" <freebsd-hackers@freebsd.org>, "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org> Subject: Re: KERN - mfi driver for Dell raid h200 on r210 servers Message-ID: <031F0ED3-42C0-4033-8DCB-A4AD4998DEDF@my.gd> In-Reply-To: <20110129222400.R39951@maildrop.int.zabbadoz.net> References: <AANLkTikfZ_ba4w975Y9pB4inY2xWae2i0253SM=ie-G0@mail.gmail.com> <20110129222400.R39951@maildrop.int.zabbadoz.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 29 Jan 2011, at 23:24, "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> wrote:
> On Sat, 29 Jan 2011, Damien Fleuriot wrote:
>
>> Hello lists,
>>
>>
>> I'm trying to get FreeBSD 8.0 or 8.1 to run on a Dell poweredge r210 server.
>>
>> It ships with a SATA/SAS h200 RAID controller.
>>
>>
>> Sadly, the MFI driver doesn't seem to register for this card...
>>
>>
>> Find below the pciconf -lcvb
>>
>> --
>> none6@pci0:1:0:0: class=0x010700 card=0x1f1d1028 chip=0x00721000
>> rev=0x02 hdr=0x00
>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
>> class = mass storage
>> subclass = SAS
>> bar [10] = type I/O Port, range 32, base 0xfc00, size 256, enabled
>> bar [14] = type Memory, range 64, base 0xdf2b0000, size 65536, enabled
>> bar [1c] = type Memory, range 64, base 0xdf2c0000, size 262144, enabled
>> cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
>> cap 10[68] = PCI-Express 2 endpoint max data 256(4096) link x8(x8)
>> cap 03[d0] = VPD
>> cap 05[a8] = MSI supports 1 message, 64 bit
>> cap 11[c0] = MSI-X supports 15 messages in map 0x14
>> --
>>
>>
>> I have added the following to /usr/src/sys/dev/mfi/mfi_pci.c at line 119:
>> --
>> {0x1000, 0x0072, 0x1028, 0x1f1e, MFI_FLAGS_GEN2, "Dell PERC H200 Integrated"},
>> --
>
> It's 1f1d not 1f1e. I hope it was only a paste problem into email?
>
Nope no copy paste problem, I shall try again tomorrow with 1f1d then.
I found this line on the nginx site where the issue was being discussed.
Will post back my results asap.
>
>>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?031F0ED3-42C0-4033-8DCB-A4AD4998DEDF>