Date: Fri, 9 Mar 2012 15:45:42 -0800 From: "Gregory W. MacPherson" <greg@netpublishing.com> To: ruby@freebsd.org Subject: Seg fault in portupgrade Message-ID: <20120309234542.GA93276@b2.netpublishing.com>
next in thread | raw e-mail | index | archive | help
Hi,
I routinely generate this error when I run portupgrade -arRu:
/usr/local/lib/ruby/site_ruby/1.8/pkginfo.rb:64: [BUG] Segmentation fault
ruby 1.8.7 (2012-02-08 patchlevel 358) [amd64-freebsd6]
It appears that pkginfo coughs on the regex for pkgname:
64:if /^(.+)-([^-]+)$/ !~ pkgname
65: raise ArgumentError, "Not in due form: <name>-<version>"
66:end
This message appears after the 'clean' step for each port.
Rerunning the command results in the next port being rebuilt followed by
the same message.
I don't code Ruby but I am a developer so would be perfectly comfortable
doing something like:
print "pkgname is " pkgname
prior to the match.
The portupgrade package can be either from ports-mgmt/portupgrade or
ports-mgmt/portupgrade-devel - doesn't matter, seems Ruby coughs on either
one.
System Details follow - please reply if I can provide any additional
information to help diagnose the issue.
-- Greg
---------------------------------- CUT HERE -----------------------------
b2# uname -a
FreeBSD b2.netpublishing.com 6.4-RELEASE-p11 FreeBSD 6.4-RELEASE-p11 #0: Wed Mar 7 19:33:54 PST 2012 root@b2.netpublishing.com:/usr/obj/usr/src/sys/B2 amd64
b2# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.4-RELEASE-p11 #0: Wed Mar 7 19:33:54 PST 2012
root@b2.netpublishing.com:/usr/obj/usr/src/sys/B2
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 242 (1603.65-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
real memory = 4160094208 (3967 MB)
avail memory = 4018536448 (3832 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xfb100000-0xfb100fff irq 19 at device 0.0 on pci1
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfb101000-0xfb101fff irq 19 at device 0.1 on pci1
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci1: <display, VGA> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1020-0x102f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5703 A2, ASIC rev. 0x1002> mem 0xfd000000-0xfd00ffff irq 27 at device 3.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:50:45:5d:63:7a
bge1: <Broadcom BCM5703 A2, ASIC rev. 0x1002> mem 0xfd010000-0xfd01ffff irq 27 at device 4.0 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:50:45:5d:63:7b
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0x3000-0x300f mem 0xfd100000-0xfd10000f,0xfd800000-0xfdffffff irq 29 at device 1.0 on pci3
twe0: [GIANT-LOCKED]
twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
speaker0: <PC speaker> port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,0xcb000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass0: Kingston DT 101 G2, rev 2.00/1.00, addr 2
umass1: SanDisk Corporation Cruzer Mini, rev 2.00/0.20, addr 3
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
acd0: DMA limited to UDMA33, controller found non-ATA66 cable
acd0: DVDR <DVDR PX-750A/1.01> at ata0-master UDMA33
twed0: <Unit 0, TwinStor, Normal> on twe0
twed0: 157065MB (321670912 sectors)
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR DVDR PX-750A 1.01> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [1 x 2048 byte records]
SMP: AP CPU #1 Launched!
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <SanDisk Cruzer Mini 0.4> Removable Direct Access SCSI-2 device
da1: 1.000MB/s transfers
da1: 977MB (2001888 512 byte sectors: 64H 32S/T 977C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Kingston DT 101 G2 PMAP> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 7636MB (15638528 512 byte sectors: 255H 63S/T 973C)
acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00
Trying to mount root from ufs:/dev/twed0s1a
bge0: link state changed to UP
bge0: promiscuous mode enabled
pid 58077 (ruby18), uid 0: exited on signal 6
pid 75744 (ruby18), uid 0: exited on signal 6
pid 91771 (ruby18), uid 0: exited on signal 6
b2# /usr/local/bin/ruby -v
ruby 1.8.7 (2012-02-08 patchlevel 358) [amd64-freebsd6]
---------------------------------- CUT HERE -----------------------------
--
Gregory W. MacPherson
Global Network Exploitation Specialist, CISSP, Security+, ITIL
http://www.netpublishing.com/greg/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120309234542.GA93276>