Date: Sun, 22 Jan 2012 14:47:47 +1100 (EST) From: Ian Smith <smithi@nimnet.asn.au> To: mato <gamato@users.sf.net> Cc: Alexander Motin <mav@freebsd.org>, freebsd-stable@freebsd.org Subject: Re: FreeBSD hangs on boot after kernel upgrade to 9.0-R Message-ID: <20120122141241.V13367@sola.nimnet.asn.au> In-Reply-To: <20120121225824.M31395@pobox.sk> References: <mailpost.1327175876.5841741.54195.mailing.freebsd.stable@FreeBSD.cs.nctu.edu.tw> <4F1B26A1.9030801@FreeBSD.org> <20120121225824.M31395@pobox.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 22 Jan 2012, mato wrote: > On Sat, 21 Jan 2012 22:57:05 +0200, Alexander Motin wrote > > Hi. > > > > On 01/21/12 21:34, mato wrote: > > > I've used freebsd-update to upgrade from 8.2-R to 9.0-R and all looked nice > > > until the first reboot. Now my FreeBSD always hangs midway through the boot > > > process and the last message output is: > > > "uhub3:<Intel EHCI root HUB..." > > > I've tried safe boot option but that does not help at all. > > > When I disable USB support in BIOS the last message before hang is: > > > "ata1: reset tp1 mask=03 ostat0=00 ostat1=00 > > > (aprobe0:ata0:0:1:0): SIGNATURE: eb14" > > > > > > Any idea what might be wrong and how to fix it please ? > > > > The last line is the ATAPI device detection. What ATA controller do > > you have there? On one Core2Duo-class Supermicro system alike hang > > was caused by ITE PATA controller. In that case it was workarounded > > by adding hint.ata.0.mode="PIO4" to /oot/loader.conf. You may try > > just set it from loader prompt with `set` command. > > > > I don't know exact controller but this is Pentium M based laptop. Which one? > HDD is primary master while DVD drive is primary slave. :-/ > And it's been working like this since FreeBSD 5.3. > > Anyway, I've tried your advice but unfortunately it did not help. > Here is longer log (retyped from screen): > > ata0: reset tp1 mask=03 ostat0=50 ostat1=00 > ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb > ata0: reset tp2 stat0=50 stat1=00 devices=0x20001 > (aprobe0:ata0:0:0:0): SIGNATURE: 0000 > ata1: reset tp1 mask=03 ostat0=00 ostat1=00 > (aprobe0:ata0:0:1:0): SIGNATURE: eb14" > > Then it hangs. And please note it looks differently when USB is not turned > off in BIOS. Though I have no idea if / how that matters. > > So what now please ? Any other things to try ? It's possible this is not an ATA problem; these being the last messages you see may just be the last (maybe) successful thing happening; those messages look about normal to me. I had similar symptoms (ie the last messages before the problem occurring being ATA ones) with a long term error (60 second stall) when resuming my Thinkpad T23, which turned out to be a USB problem, in my case with UHCI. The solution to that was to build a kernel thus: include GENERIC ident NO_UHCI # load on boot, unload/reload around suspend/resume nodevice uhci # UHCI PCI->USB interface # not used nodevice ohci # OHCI PCI->USB interface # not used, USB 1 only nodevice ehci # EHCI PCI->USB interface (USB 2.0) That's on 8.2-RELEASE, but I haven't heard of this issue being resolved on 9 yet. Of course, if you can't boot you can't build a new kernel on it, but I thought I'd mention USB as a possible 'hidden' issue here. cheers, Ian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120122141241.V13367>