Date: Sun, 16 Feb 2014 09:16:30 GMT From: Philipp Maechler <philipp.maechler@mamo.li> To: freebsd-gnats-submit@FreeBSD.org Subject: usb/186811: Intel NUC Haswell Generation USB 3 support (solution attached) Message-ID: <201402160916.s1G9GUeR046495@cgiserv.freebsd.org> Resent-Message-ID: <201402160920.s1G9K0Lh092137@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 186811 >Category: usb >Synopsis: Intel NUC Haswell Generation USB 3 support (solution attached) >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Feb 16 09:20:00 UTC 2014 >Closed-Date: >Last-Modified: >Originator: Philipp Maechler >Release: 9.2-RELEASE / 10.0-RELEASE >Organization: >Environment: FreeBSD x.tontaube.ch 10.0-RELEASE FreeBSD 10.0-RELEASE #6 r261922M: Sat Feb 15 19:30:32 CET 2014 root@x.tontaube.ch:/usr/obj/usr/src/sys/GENERIC amd64 >Description: I bought a Intel Nuc D34010WYK [0]. It has a QS77 Chipset with a Intel Panther Point USB Controller (as far as I can say). The problem was, that a connected external harddisk case (it has a JMicron USB2Sata bridge JMicron JMS539 [1]) or even a simple usb 3 memory stick, it was always connected at highspeed (usb2) instead of superspeed (usb3) (see usbconfig in [2]). Of course, the attached harddisk drives only appeared to have only 40MB/s transfer rates instead of 400MB/s. [0] http://www.intel.com/content/www/us/en/nuc/nuc-kit-d34010wyk.html [1] http://www.jmicron.com/Product_JMS539.htm JMicron USB2Sata bridge (in a Raidsonic Icybox IB-3640SU3 together with a JMB321 SATA port multiplier) [2] faked output out of my head, if you need an exactly output I will provide after a reboot from a 10.0-RELEASE memory stick: [root@x ~]# usbconfig ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <product 0x8000 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.6: <USB to ATAATAPI Bridge JMicron> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (8mA) # <- PROBLEM ugen0.7: <USB to ATAATAPI Bridge JMicron> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (8mA) # <- PROBLEM >How-To-Repeat: Attach any USB 3 mass storage (maybe any device) to a Intel Nuc D34010WYK. Below 9.2-RELEASE and 10.0-RELEASE, the device will only appear as a HIGH-speed device (usb2) instead of a SUPER-speed device (usb3). (e.g. output dmesg or usbconfig) >Fix: By accident I found this commit: http://lists.freebsd.org/pipermail/svn-src-stable-9/2012-November/003213.html I then realized, that the pci dev id on my intel nuc is 0x9c318086 instead of 0x8c318086. In a fast hack I added the same code for this id in a 10.0-RELEASE Generic kernel [3] and the problem was solved [4], the devices are now correctly routed to xhci and have superspeed support. I hope this pr helps to integrate the solution to FreeBSD, but I think the patch is not finished yet (maybe you would change the descriptions etc, as my knowledge of hardware naming is limited I'm not able to do). But as it doesn't change much, I'd define it as production-ready. Philipp [3] [root@x /usr/src]# svn diff sys/dev/usb/controller/xhci_pci.c Index: sys/dev/usb/controller/xhci_pci.c =================================================================== --- sys/dev/usb/controller/xhci_pci.c (revision 261922) +++ sys/dev/usb/controller/xhci_pci.c (working copy) @@ -106,6 +106,8 @@ return ("Intel Panther Point USB 3.0 controller"); case 0x8c318086: return ("Intel Lynx Point USB 3.0 controller"); + case 0x9c318086: + return ("Intel Panther Point USB 3.0 controller"); default: break; @@ -239,6 +241,7 @@ switch (pci_get_devid(self)) { case 0x1e318086: /* Panther Point */ case 0x8c318086: /* Lynx Point */ + case 0x9c318086: /* Panther Point */ sc->sc_port_route = &xhci_pci_port_route; break; default: [4] [root@x /usr/src]# usbconfig ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <product 0x8000 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.6: <USB to ATAATAPI Bridge JMicron> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (2mA) # <- perfect ugen0.7: <USB to ATAATAPI Bridge JMicron> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (2mA) # <- perfect Patch attached with submission follows: --- sys/dev/usb/controller/xhci_pci.c 2014-02-16 10:09:07.597292623 +0100 +++ sys/dev/usb/controller/xhci_pci.c.new 2014-02-16 10:09:00.400292742 +0100 @@ -24,7 +24,7 @@ */ #include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/10.0/sys/dev/usb/controller/xhci_pci.c 255768 2013-09-21 21:40:57Z hselasky $"); +__FBSDID("$FreeBSD: release/10.0.0/sys/dev/usb/controller/xhci_pci.c 255768 2013-09-21 21:40:57Z hselasky $"); #include <sys/stdint.h> #include <sys/stddef.h> @@ -106,6 +106,8 @@ return ("Intel Panther Point USB 3.0 controller"); case 0x8c318086: return ("Intel Lynx Point USB 3.0 controller"); + case 0x9c318086: + return ("Intel Panther Point USB 3.0 controller"); default: break; @@ -239,6 +241,7 @@ switch (pci_get_devid(self)) { case 0x1e318086: /* Panther Point */ case 0x8c318086: /* Lynx Point */ + case 0x9c318086: /* Panther Point */ sc->sc_port_route = &xhci_pci_port_route; break; default: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201402160916.s1G9GUeR046495>