Date: Sat, 11 Apr 2015 17:06:32 -0700 (MST) From: SvenB <sven@polycoresoftware.com> To: freebsd-arm@freebsd.org Subject: Re: Bluetooth on the Wandboard Quad Message-ID: <1428797192241-6004458.post@n5.nabble.com> In-Reply-To: <04cf01d070f0$6f993d40$4ecbb7c0$@polycoresoftware.com> References: <04cf01d070f0$6f993d40$4ecbb7c0$@polycoresoftware.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, Some additional information on this topic. The IOGEAR Bluetooth 4.0 USB Micro Adapter GBU521W6, works fine when plugged into USB2 on amd64 both server and VM client, both 10.1. It doesn't work when plugged into USB3 on the server (10.1) or the Wandboard (11.0 current) USB host connector (not sure if USB3, the plastic inside is blue). Below is some information on the various setups. Any advice on how to get it working on the Wandboard, or information on alternative bluetooth adapter that works with the Wandboard would be appreciated. It's a Wandboard-Quad. Regards, Sven ================================================ Server FreeBSD 10.1-RELEASE-p11, amd64 USB2 connector (the bluetooth adapter works in this setup): # usbconfig ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen2.1: <XHCI root HUB 0x1b21> at usbus2, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen3.2: <product 0x0024 vendor 0x8087> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen3.3: <product 0x8021 vendor 0x0557> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (100mA) ugen3.4: <HP USB Multimedia Keyboard CHICONY> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) ugen3.5: <BCM20702A0 Broadcom Corp> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (0mA) # usbconfig -d ugen3.5 dump_device_desc ugen3.5: <BCM20702A0 Broadcom Corp> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00ff bDeviceSubClass = 0x0001 bDeviceProtocol = 0x0001 bMaxPacketSize0 = 0x0040 idVendor = 0x0a5c idProduct = 0x21e8 bcdDevice = 0x0112 iManufacturer = 0x0001 <Broadcom Corp> iProduct = 0x0002 <BCM20702A0> iSerialNumber = 0x0003 <000272D69EE6> bNumConfigurations = 0x0001 USB3 connector (the bluetooth adapter DOESN'T work in this setup): # usbconfig ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen2.1: <XHCI root HUB 0x1b21> at usbus2, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen3.2: <product 0x0024 vendor 0x8087> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen3.3: <product 0x8021 vendor 0x0557> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (100mA) ugen3.4: <HP USB Multimedia Keyboard CHICONY> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) The device is not recognized when plugged into USB3 connector ================================================ VM running on amd64 USB2 Hub (the bluetooth adapter works in this setup): # usbconfig -d ugen0.4 dump_device_desc ugen0.4: <BCM920702 Bluetooth 4.0 Broadcom Corp> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00ff bDeviceSubClass = 0x0001 bDeviceProtocol = 0x0001 bMaxPacketSize0 = 0x0040 idVendor = 0x0a5c idProduct = 0x21e8 bcdDevice = 0x0112 iManufacturer = 0x0001 <Broadcom Corp> iProduct = 0x0002 <BCM920702 Bluetooth 4.0> iSerialNumber = 0x0003 <000272D69EE6> bNumConfigurations = 0x0001 ================================================ Wandboard USB3? connector (not sure if it is 3, but the platic in the connector is blue) (the bluetooth adapter DOESN'T work in this setup): # usbconfig -d ugen1.2 dump_device_desc ugen1.2: <BCM20702A0 Broadcom Corp> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00ff <Vendor specific> bDeviceSubClass = 0x0001 bDeviceProtocol = 0x0001 bMaxPacketSize0 = 0x0040 idVendor = 0x0a5c idProduct = 0x21e8 bcdDevice = 0x0112 iManufacturer = 0x0001 <retrieving string failed> iProduct = 0x0002 <retrieving string failed> iSerialNumber = 0x0003 <retrieving string failed> bNumConfigurations = 0x0001 Console output whe the bt adapter is plugged in: ugen1.2: <Broadcom Corp> at usbus1 ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 2> on usbus1 WARNING: attempt to domain_add(netgraph) after domainfinalize() ng_hci_process_event: ubt0hci - got HCI event=0xe, length=4 ng_hci_process_event: ubt0hci - got HCI event=0xe, length=10 ng_hci_process_event: ubt0hci - got HCI event=0xe, length=12 ng_hci_process_event: ubt0hci - got HCI event=0xe, length=11 ng_hci_process_event: ubt0hci - got HCI event=0xe, length=4 ng_hci_process_event: ubt0hci - got HCI event=0xe, length=4 ng_hci_process_event: ubt0hci - got HCI event=0xe, length=4 ng_hci_process_event: ubt0hci - got HCI event=0xe, length=4 ubt0: ubt_ctrl_write_callback:780: control transfer failed: USB_ERR_IOERROR ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x13. Timeout -- View this message in context: http://freebsd.1045724.n5.nabble.com/Bluetooth-on-the-Wandboard-Quad-tp6003976p6004458.html Sent from the freebsd-arm mailing list archive at Nabble.com.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1428797192241-6004458.post>