Date: Wed, 17 Jun 2015 19:15:37 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-usb@FreeBSD.org Subject: [Bug 200938] service moused restart required after resume from suspend Message-ID: <bug-200938-17@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200938 Bug ID: 200938 Summary: service moused restart required after resume from suspend Product: Base System Version: 10.1-STABLE Hardware: Any OS: Any Status: New Severity: Affects Only Me Priority: --- Component: usb Assignee: freebsd-usb@FreeBSD.org Reporter: jrm@ftfl.ca After an upgrade from 10-STABLE (synced a few months ago) to 10-STABLE r281907 (Thu Apr 23) the psm mouse (pointing stick on a Lenovo X220) no longer works after a resume. At BSDCan there were a number of X220s and others had the same problem when running CURRENT. The problems occur in both X and at the console. The dmesg output after putting debug.psm.loglevel=2 in /boot/loader.conf is pasted below. There are similar PRs, but I think this one is different since the mouse was working after those reports and only broke in the last few months and none of the referenced hints in /boot/loader.conf work in this case. Adding service moused restart to rc.resume doesn't help. Only running it from a shell prompt after the resume works. May 1 21:50:30 phe devd: Executing '/etc/rc.suspend acpi 0x03' May 1 21:50:30 phe acpi: suspend at 20150501 21:50:30 May 1 21:50:33 phe kernel: uhub0: at usbus0, port 1, addr 1 (disconnected) May 1 21:50:33 phe kernel: ugen0.2: <vendor 0x8087> at usbus0 (disconnected) May 1 21:50:33 phe kernel: uhub2: at uhub0, port 1, addr 2 (disconnected) May 1 21:50:33 phe kernel: ugen0.3: <Chicony Electronics Co., Ltd.> at usbus0 (disconnected) May 1 21:50:47 phe kernel: uhub1: at usbus1, port 1, addr 1 (disconnected) May 1 21:50:47 phe kernel: ugen1.2: <vendor 0x8087> at usbus1 (disconnected) May 1 21:50:47 phe kernel: uhub3: at uhub1, port 1, addr 2 (disconnected) May 1 21:50:47 phe kernel: pci0: failed to set ACPI power state D2 on \_SB_.PCI0.EXP1: AE_BAD_PARAMETER May 1 21:50:47 phe kernel: pci0: failed to set ACPI power state D2 on \_SB_.PCI0.EXP2: AE_BAD_PARAMETER May 1 21:50:47 phe kernel: pci0: failed to set ACPI power state D2 on \_SB_.PCI0.EXP4: AE_BAD_PARAMETER May 1 21:50:47 phe kernel: pci0: failed to set ACPI power state D2 on \_SB_.PCI0.EXP5: AE_BAD_PARAMETER May 1 21:50:47 phe kernel: acpi0: cleared fixed power button status May 1 21:50:47 phe kernel: info: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on May 1 21:50:47 phe kernel: error: [drm:pid1253:intel_lvds_enable] *ERROR* timed out waiting for panel to power off May 1 21:50:47 phe kernel: em0: link state changed to DOWN May 1 21:50:47 phe kernel: psm0: system resume hook called. May 1 21:50:47 phe kernel: psm0: current command byte: 0047 (reinitialize). May 1 21:50:47 phe kernel: psm: DISABLE_DEV return code:00fa May 1 21:50:47 phe kernel: psm: ENABLE_DEV return code:00fa May 1 21:50:47 phe kernel: psm: DISABLE_DEV return code:00fa May 1 21:50:47 phe kernel: psm: SET_SAMPLING_RATE (100) 00fa May 1 21:50:47 phe kernel: psm: SET_RESOLUTION (2) 00fa May 1 21:50:47 phe kernel: psm: SET_SCALING11 return code:00fa May 1 21:50:47 phe kernel: psm: SET_STREAM_MODE return code:00fa May 1 21:50:47 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa May 1 21:50:47 phe kernel: psm: status 00 02 64 May 1 21:50:47 phe kernel: psm: ENABLE_DEV return code:00fa May 1 21:50:47 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa May 1 21:50:47 phe kernel: psm: status 20 02 64 May 1 21:50:47 phe kernel: psm0: system resume hook exiting. May 1 21:50:47 phe kernel: uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 May 1 21:50:47 phe kernel: uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 May 1 21:50:47 phe devd: Executing '/etc/rc.resume acpi 0x03' May 1 21:50:47 phe acpi: resumed at 20150501 21:50:47 May 1 21:50:48 phe kernel: em0: link state changed to UP May 1 21:50:48 phe devd: Executing '/etc/rc.d/dhclient quietstart em0' May 1 21:50:48 phe kernel: uhub1: 3 ports with 3 removable, self powered May 1 21:50:48 phe kernel: uhub0: 3 ports with 3 removable, self powered May 1 21:50:49 phe kernel: ugen0.2: <vendor 0x8087> at usbus0 May 1 21:50:49 phe kernel: uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 May 1 21:50:49 phe kernel: ugen1.2: <vendor 0x8087> at usbus1 May 1 21:50:49 phe kernel: uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 May 1 21:50:50 phe kernel: uhub2: 6 ports with 6 removable, self powered May 1 21:50:51 phe kernel: uhub3: 8 ports with 8 removable, self powered May 1 21:50:51 phe kernel: ugen0.3: <Chicony Electronics Co., Ltd.> at usbus0 May 1 21:50:51 phe devd: Executing '/usr/local/etc/rc.d/webcamd start ugen0.3' May 1 21:50:51 phe devd: Executing '/usr/local/etc/rc.d/webcamd start ugen0.3' May 1 21:50:51 phe devd: Executing 'logger Unknown USB device: vendor 0x04f2 product 0xb217 bus uhub2' May 1 21:50:51 phe root: Unknown USB device: vendor 0x04f2 product 0xb217 bus uhub2 May 1 21:50:51 phe devd: Executing 'logger Unknown USB device: vendor 0x04f2 product 0xb217 bus uhub2' May 1 21:50:51 phe root: Unknown USB device: vendor 0x04f2 product 0xb217 bus uhub2 May 1 21:50:51 phe devd: Executing 'logger Unknown USB device: vendor 0x04f2 product 0xb217 bus uhub2' May 1 21:50:51 phe root: Unknown USB device: vendor 0x04f2 product 0xb217 bus uhub2 May 1 21:50:51 phe dhclient: New IP Address (em0): 192.168.2.2 May 1 21:50:51 phe dhclient: New Subnet Mask (em0): 255.255.255.0 May 1 21:50:51 phe dhclient: New Broadcast Address (em0): 192.168.2.255 May 1 21:50:51 phe dhclient: New Routers (em0): 192.168.2.1 Restart moused: May 1 21:51:08 phe kernel: psm: DISABLE_DEV return code:00fa May 1 21:51:08 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa May 1 21:51:08 phe kernel: psm: status 00 02 64 May 1 21:51:09 phe kernel: psm: ENABLE_DEV return code:00fa May 1 21:51:09 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa May 1 21:51:09 phe kernel: psm: status 20 02 64 May 1 21:51:09 phe kernel: psm: SET_SAMPLING_RATE (100) 00fa May 1 21:51:09 phe kernel: psm: SET_RESOLUTION (2) 00fa May 1 21:51:09 phe kernel: psm: SET_SCALING11 return code:00fa May 1 21:51:09 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa May 1 21:51:09 phe kernel: psm: status 20 02 64 May 1 21:51:09 phe kernel: psmintr: Sync bytes now 00c0,00c0 May 1 21:51:57 phe kernel: error: [drm:pid1498:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 1a000000, was 12060000 May 1 21:53:54 phe kernel: error: [drm:pid1498:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 1a0d0000, was 1a000000 -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-200938-17>