Date: Sun, 22 Mar 2015 01:00:12 +0000 From: Miguel Clara <miguelmclara@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: ath0 performence issues "ar9300_Stub_GetCTSTimeout" "ar9300_Stub_GetCTSTimeout Message-ID: <CADGo8CWBjVvvAxpXKSrr6BqOE7SBBv%2B2trcGwa6JSf1KPsAB6A@mail.gmail.com> In-Reply-To: <CADGo8CXeHiWypp3O6LT9x3aBwxHcUFGpfx0GpDJeE-OcG0YjgQ@mail.gmail.com> References: <CADGo8CWitJUhU0%2BjDX59gv%2Bc-4uhpgf58=r_K%2Bfq=4acDTni8A@mail.gmail.com> <CAJ-VmonRS-ifM2YYUFn73g7xWSmpeqWYcK86h=RuYHtiRuyE%2Bg@mail.gmail.com> <CADGo8CVX50Zfypwzc-_tjcZ-ej41rmvU00N3g7Fjh9XFQyCVDA@mail.gmail.com> <CADGo8CXKQszJWgM46q8wRkMZjKSXgn9=iLqx3mUEc7htuNU1RQ@mail.gmail.com> <CAJ-VmokfdeCU528L135HKupJ0iJartBDbwjMoww_16Km8jeFrQ@mail.gmail.com> <CADGo8CUoJb_YxHHZP_z=2yEYU0=Sg_ULL4GiTPRZ1B2SLnheYA@mail.gmail.com> <CAJ-VmonXcVTa-h2T2uEoMtNbw4GnB3vZZTf9UrEC6XrPLGeiTg@mail.gmail.com> <CADGo8CXB6rK%2BCPZ9i=V48z3cTLw3Wah2w88bKVpxf4vOJPR=9Q@mail.gmail.com> <CADGo8CXZY3bzBq=MAMMDu1sJMyqScbvWj9NhYLzGnS%2Bw-VKL5Q@mail.gmail.com> <CAJ-VmokfXR8pL9P3c8C_yACLxddHW=7hFqM9YDYd6N2=pX8Wng@mail.gmail.com> <CADGo8CWbS3iSE=ssndfb_gSCxdRrx9-Ve9_nSbG6MdWmhj4a3Q@mail.gmail.com> <CADGo8CV%2BEiPXUF==c=1kMHQBxsCDmrAuj_wEiymeLu%2BaUukBrQ@mail.gmail.com> <CAJ-Vmok1xxeNrA=dX6SGgPNq5zOE_5a3_5QZgMt__u1nBV3qkw@mail.gmail.com> <CADGo8CURXQqh21SPdp%2B0BdE=7oksUMwM87PU3qKHszPd%2BMkfpA@mail.gmail.com> <CADGo8CX2hfKzA4ab7SUEFxoLzR=B5_533OzHHnAMUzHvA%2B_WuA@mail.gmail.com> <CADGo8CUO0fh=fBmZx%2BDt9wv54HOA92Yx5gKz2eUjGoG70ZMSdQ@mail.gmail.com> <CADGo8CWJFd0FoowS7O4G3yWwzbfkdmeQa=YwCt6F8yyUKZ6WCw@mail.gmail.com> <CAJ-Vmok50--g0xgHMzaWFJ0uF-T6Wxqs2A0ue2MxDRpLnvXMLA@mail.gmail.com> <CAJ-Vmok79b0U3185_ofGG8dpxqkxGod86LX_-ri%2BeVSv8rtLLw@mail.gmail.com> <CADGo8CUMzY7j6h55dscW5t0jm5Jb_yBRj56UfDei0oY1GpiWww@mail.gmail.com> <CADGo8CWDhwDfiJr=gDDvvpe7pX6ZJgUJhVxtDx6PEavSLzX7Ew@mail.gmail.com> <CADGo8CXeHiWypp3O6LT9x3aBwxHcUFGpfx0GpDJeE-OcG0YjgQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Mar 20, 2015 at 2:42 PM, Miguel Clara <miguelmclara@gmail.com> wrote: > > On Fri, Mar 20, 2015 at 2:41 PM, Miguel Clara <miguelmclara@gmail.com> > wrote: > >> >> On Fri, Mar 20, 2015 at 3:25 AM, Miguel Clara <miguelmclara@gmail.com> >> wrote: >> >>> >>> On Fri, Mar 20, 2015 at 3:20 AM, Adrian Chadd <adrian@freebsd.org> >>> wrote: >>> >>>> What's the output of ifconfig -v wlan0 ? >>>> >>>> and run athstats 1 for a while whilst doing traffic, say speedtest, >>>> and paste the results from there. >>>> >>>> >>>> >>>> ]# ifconfig -v wlan0 >>> >>> >>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >>> 1500 >>> ether e0:06:e6:aa:bf:5b >>> inet 10.10.50.70 netmask 0xffffff00 broadcast 10.10.50.255 >>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >>> media: IEEE 802.11 Wireless Ethernet MCS mode 11na >>> status: associated >>> ssid PissnLove5G channel 48 (5240 MHz 11a ht/40-) bssid >>> 60:a4:4c:28:13:c4 >>> regdomain 108 country DEBUG indoor ecm authmode WPA2/802.11i -wps >>> -tsn privacy ON deftxkey UNDEF >>> AES-CCM 2:128-bit >>> AES-CCM 3:128-bit powersavemode OFF powersavesleep 100 txpower 30 >>> txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7 >>> 11a ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 >>> 11b ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 >>> 11g ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 >>> turboA ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 >>> turboG ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 >>> sturbo ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 >>> 11na ucast NONE mgmt 12 MCS mcast 12 MCS maxretry 6 >>> 11ng ucast NONE mgmt 2 MCS mcast 2 MCS maxretry 6 >>> half ucast NONE mgmt 3 Mb/s mcast 3 Mb/s maxretry 6 >>> quarter ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 >>> scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250 >>> roam:11a rssi 7dBm rate 12 Mb/s >>> roam:11b rssi 7dBm rate 1 Mb/s >>> roam:11g rssi 7dBm rate 5 Mb/s >>> roam:turboA rssi 7dBm rate 12 Mb/s >>> roam:turboG rssi 7dBm rate 12 Mb/s >>> roam:sturbo rssi 7dBm rate 12 Mb/s >>> roam:11na rssi 7dBm MCS 1 >>> roam:11ng rssi 7dBm MCS 1 >>> roam:half rssi 7dBm rate 6 Mb/s >>> roam:quarter rssi 7dBm rate 3 Mb/s >>> -pureg protmode CTS ht htcompat ampdu ampdulimit 64k >>> ampdudensity 4 >>> amsdu shortgi htprotmode RTSCTS -puren -smps -rifs wme burst >>> -dwds >>> roaming MANUAL bintval 100 >>> AC_BE cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm ack >>> cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm >>> AC_BK cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm ack >>> cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm >>> AC_VI cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm ack >>> cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm >>> AC_VO cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm ack >>> cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm >>> groups: wlan >>> >>> Going to recompile and I'll re-run athstats >>> >> >> Hum it seems that after the recompile/reboot things are a bit better... >> >> [miguelc@r2d2:~ ]% speedtest >> Retrieving speedtest.net configuration... >> Retrieving speedtest.net server list... >> Testing from Vodafone Portugal (89.114.40.155)... >> Selecting best server based on latency... >> Hosted by Vodafone PT (Porto) [16.63 km]: 22.599 ms >> Testing download speed........................................ >> Download: 91.17 Mbits/s >> Testing upload speed.................................................. >> Upload: 9.48 Mbits/s >> [miguelc@r2d2:~ ]% speedtest >> Retrieving speedtest.net configuration... >> Retrieving speedtest.net server list... >> Testing from Vodafone Portugal (89.114.40.155)... >> Selecting best server based on latency... >> Hosted by Vodafone PT (Porto) [16.63 km]: 5.164 ms >> Testing download speed........................................ >> Download: 93.21 Mbits/s >> Testing upload speed.................................................. >> Upload: 10.65 Mbits/s >> >> ########################################### >> [ ID] Interval Transfer Bandwidth >> [ 4] 0.00-1.01 sec 1.42 MBytes 11.8 Mbits/sec >> [ 4] 1.01-2.00 sec 5.66 KBytes 46.7 Kbits/sec >> [ 4] 2.00-3.00 sec 3.94 MBytes 33.1 Mbits/sec >> [ 4] 3.00-4.00 sec 4.15 MBytes 34.8 Mbits/sec >> [ 4] 4.00-5.00 sec 4.52 MBytes 37.9 Mbits/sec >> [ 4] 5.00-6.00 sec 4.44 MBytes 37.3 Mbits/sec >> [ 4] 6.00-7.00 sec 4.44 MBytes 37.3 Mbits/sec >> [ 4] 7.00-8.00 sec 4.36 MBytes 36.6 Mbits/sec >> [ 4] 8.00-9.00 sec 6.67 MBytes 55.9 Mbits/sec >> [ 4] 9.00-10.00 sec 5.45 MBytes 45.7 Mbits/sec >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bandwidth >> [ 4] 0.00-10.00 sec 39.4 MBytes 33.1 Mbits/sec >> sender >> [ 4] 0.00-10.00 sec 38.9 MBytes 32.6 Mbits/sec >> receiver >> >> ( First Iperf was run on purpose in the middle of the first speedtest >> (and while runing athstats 1) >> [ ID] Interval Transfer Bandwidth >> [ 4] 0.00-1.00 sec 6.20 MBytes 52.0 Mbits/sec >> [ 4] 1.00-2.00 sec 6.46 MBytes 54.2 Mbits/sec >> [ 4] 2.00-3.00 sec 6.55 MBytes 55.0 Mbits/sec >> [ 4] 3.00-4.00 sec 8.64 MBytes 72.5 Mbits/sec >> [ 4] 4.00-5.00 sec 8.50 MBytes 71.3 Mbits/sec >> [ 4] 5.00-6.00 sec 8.81 MBytes 73.9 Mbits/sec >> [ 4] 6.00-7.00 sec 9.24 MBytes 77.5 Mbits/sec >> [ 4] 7.00-8.00 sec 8.87 MBytes 74.4 Mbits/sec >> [ 4] 8.00-9.00 sec 8.68 MBytes 72.8 Mbits/sec >> [ 4] 9.00-10.00 sec 8.94 MBytes 75.0 Mbits/sec >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bandwidth >> [ 4] 0.00-10.00 sec 80.9 MBytes 67.8 Mbits/sec >> sender >> [ 4] 0.00-10.00 sec 80.6 MBytes 67.6 Mbits/sec >> receiver >> ############################################################ >> >> athstats ==> http://pastebin.com/zXhG6FWc >> >> typo: > >> things look better, *I've* had better results before though, but I would >> still consider this ok if it keeps this state... >> > I left the Laptop online for quite some time (almost all day) but with no user activiy. I was just replying some email (as adrian might have noticed :) )and notice the internet seemed a lot slower, and I'm back to the same reported state in see the error messages: ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetAntennaSwitch: called ath0: ath_intr: TSFOOR and speedtest results are very poor: speedtest Retrieving speedtest.net configuration... Retrieving speedtest.net server list... Testing from Vodafone Portugal (89.114.40.155)... Selecting best server based on latency... Hosted by Vodafone PT (Porto) [16.63 km]: 5.686 ms Testing download speed........................................ Download: 33.64 Mbits/s Testing upload speed.................................................. Upload: 6.69 Mbits/s I was also playing with the "Fn-F3" key was reported in the other thread but I've done it earlier and saw no issues at the time. I wonder then if this as something to do with long periods of inactivity which as the first TSFOOR is ~22pm Mar 21 21:55:10 r2d2 kernel: ath0: ath_intr: TSFOOR Thats basicly ~the time I resumed the session, and by that I mean just login back to lumina-DE - I did not use resume/suspend, as I was plaining to be back sooner :) >> -a >>>> >>>> >>>> On 19 March 2015 at 20:17, Adrian Chadd <adrian@freebsd.org> wrote: >>>> > Ah, add ATH_DEBUG, AH_DEBUG and AH_DIAGAPI to your kernel and >>>> recompile! >>>> > >>>> > >>>> > -a >>>> > >>>> > >>>> > On 19 March 2015 at 19:32, Miguel Clara <miguelmclara@gmail.com> >>>> wrote: >>>> >> >>>> >> On Fri, Mar 20, 2015 at 2:11 AM, Miguel Clara < >>>> miguelmclara@gmail.com> >>>> >> wrote: >>>> >>> >>>> >>> >>>> >>> On Fri, Mar 20, 2015 at 1:55 AM, Miguel Clara < >>>> miguelmclara@gmail.com> >>>> >>> wrote: >>>> >>>> >>>> >>>> >>>> >>>> On Fri, Mar 20, 2015 at 1:18 AM, Miguel Clara < >>>> miguelmclara@gmail.com> >>>> >>>> wrote: >>>> >>>>> >>>> >>>>> >>>> >>>>> On Thu, Mar 19, 2015 at 9:49 PM, Adrian Chadd <adrian@freebsd.org >>>> > >>>> >>>>> wrote: >>>> >>>>>> >>>> >>>>>> Whilst running this, can you run 'athstats 1' on the freebsd box? >>>> >>>>>> >>>> >>>>>> i wonder what the signal level and retransmit rates are. >>>> >>>>> >>>> >>>>> >>>> >>>>> Not sure hwo to do that... do I need ath_debug? >>>> >>>>> >>>> >>>>> I did found '/usr/src/tools/tools/ath/athstats' and tried to >>>> "make" >>>> >>>>> >>>> >>>>> clang -O2 -pipe -DATH_DEFAULT='"ath0"' >>>> >>>>> -I/usr/src/tools/tools/ath/athstats >>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../common >>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys >>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/dev/ath >>>> >>>>> >>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/dev/ath/ath_hal >>>> >>>>> >>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/contrib/dev/ath/ath_hal >>>> >>>>> -I/usr/src/tools/tools/ath/athstats -DATH_SUPPORT_ANI >>>> -DATH_SUPPORT_TDMA >>>> >>>>> -DATH_DEFAULT='"ath0"' -I/usr/src/tools/tools/ath/athstats >>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../common >>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys >>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/dev/ath >>>> >>>>> >>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/dev/ath/ath_hal >>>> >>>>> >>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/contrib/dev/ath/ath_hal >>>> >>>>> -I/usr/src/tools/tools/ath/athstats -std=gnu99 -fstack-protector >>>> >>>>> -fbracket-depth=512 -Qunused-arguments -rpath /usr/lib/private >>>> -o athstats >>>> >>>>> main.o athstats.o -L/usr/src/lib/libbsdstat -lbsdstat >>>> >>>>> /usr/bin/ld: cannot find -lbsdstat >>>> >>>>> clang: error: linker command failed with exit code 1 (use -v to >>>> see >>>> >>>>> invocation) >>>> >>>>> *** Error code 1 >>>> >>>>> >>>> >>>>> Stop. >>>> >>>>> make: stopped in /usr/src/tools/tools/ath/athstats >>>> >>>>> >>>> >>>>> I installed bsdstats but after make clean;make I still get the >>>> same. >>>> >>>> >>>> >>>> >>>> >>>> Oh wait: >>>> >>>> -L/usr/src/lib/libbsdstat -lbsdstat >>>> >>>> >>>> >>>> /usr/bin/ld: cannot find -lbsdstat >>>> >>>> >>>> >>>> Should it look in /usr/private? >>>> >>>> >>>> >>>> Or maybe not... I saw this: >>>> >>>> ###################### >>>> >>>> commit 050d4409aa855fa1f82f6ca0dbb7e0c865c05e32 >>>> >>>> Author: bapt <bapt@FreeBSD.org> >>>> >>>> Date: Tue Nov 25 22:37:27 2014 +0000 >>>> >>>> >>>> >>>> Convert to LIBADD >>>> >>>> >>>> >>>> Notes: >>>> >>>> svn path=/head/; revision=275084 >>>> >>>> >>>> >>>> diff --git a/tools/tools/ath/athstats/Makefile >>>> >>>> b/tools/tools/ath/athstats/Makefile >>>> >>>> index 8d1bfa6..a7ff43b 100644 >>>> >>>> --- a/tools/tools/ath/athstats/Makefile >>>> >>>> +++ b/tools/tools/ath/athstats/Makefile >>>> >>>> @@ -23,9 +23,7 @@ CFLAGS+=-DATH_SUPPORT_TDMA >>>> >>>> >>>> >>>> CFLAGS.clang+= -fbracket-depth=512 >>>> >>>> >>>> >>>> -USEPRIVATELIB= bsdstat >>>> >>>> - >>>> >>>> -LDADD= ${LDBSDSTAT} >>>> >>>> +LIBADD= bsdstat >>>> >>>> >>>> >>>> opt_ah.h: >>>> >>>> echo "#define AH_DEBUG 1" > opt_ah.h >>>> >>>> ################# >>>> >>>> >>>> >>>> reverting gives me this: >>>> >>>> >>>> >>>> [...]ib/private -rpath /usr/lib/private -o athstats main.o >>>> athstats.o >>>> >>>> athstats.o: In function `athstats_new': >>>> >>>> athstats.c:(.text+0x3e): undefined reference to `bsdstat_init' >>>> >>>> clang: error: linker command failed with exit code 1 (use -v to see >>>> >>>> invocation) >>>> >>>> >>>> >>>> If I can get around this I'd love to post those stats >>>> >>>> >>>> >>> >>>> >>> Sadly I'm no C expert... I'm not even a coder but "bsdstat_init" >>>> defiantly >>>> >>> exists and the include bsdstat.h is in athstats.h... >>>> >>> makes no sense (to me) :| >>>> >>> >>>> >> >>>> >> In the mean time I checked out a version before bsdstat and I was >>>> able to >>>> >> complie, output follows >>>> >> % sudo athstats >>>> >> athstats: ioctl: ath0: Invalid argument <------------------ Is this >>>> >> expected? >>>> >> athstats: ioctl: ath0: Invalid argument >>>> >> 990785 data frames received >>>> >> 559194 data frames transmit >>>> >> 7602 tx frames with an alternate rate >>>> >> 27634 short on-chip tx retries >>>> >> 100075 long on-chip tx retries >>>> >> 374 tx failed 'cuz too many retries >>>> >> 24 mib overflow interrupts >>>> >> 3 tx linearized to cluster >>>> >> MCS3 current transmit rate >>>> >> 17 beacon miss interrupts >>>> >> 31173 rx failed 'cuz of bad CRC >>>> >> 114 rx failed 'cuz of PHY err >>>> >> 5 OFDM restart >>>> >> 109 CCK restart >>>> >> 247 periodic calibrations >>>> >> -0/+0 TDMA slot adjust (usecs, smoothed) >>>> >> 28 rssi of last ack >>>> >> 40 avg recv rssi >>>> >> -96 rx noise floor >>>> >> 614 tx frames through raw api >>>> >> 601749 A-MPDU sub-frames received >>>> >> 187766 Half-GI frames received >>>> >> 443941 40MHz frames received >>>> >> 12776 CRC errors for non-last A-MPDU subframes >>>> >> 198 CRC errors for last subframe in an A-MPDU >>>> >> 558554 Frames transmitted with HT Protection >>>> >> 169 TX Timeout >>>> >> Antenna profile: >>>> >> [0] tx 558817 rx 36629 >>>> >> [1] tx 0 rx 772652 >>>> >> [2] tx 0 rx 26737 >>>> >> [3] tx 0 rx 30276 >>>> >> [4] tx 0 rx 28833 >>>> >> [5] tx 0 rx 25606 >>>> >> [6] tx 0 rx 30300 >>>> >> [7] tx 0 rx 39752 >>>> >> >>>> >> >>>> >> >>>> >>> >>>> >>> >>>> >>>> >>>> >>>>> >>>> >>>>>> Thanks, >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> -a >>>> >>>>> >>>> >>>>> >>>> >>>> >>>> >>> >>>> >> >>>> >>> >>> >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADGo8CWBjVvvAxpXKSrr6BqOE7SBBv%2B2trcGwa6JSf1KPsAB6A>