Date: Mon, 29 Aug 2016 12:07:34 +0900 (JST) From: Mori Hiroki <yamori813@yahoo.co.jp> To: Stanislav Galabov <sgalabov@gmail.com>, Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: sys/mips/mediatek kernel crash on RT3050 Message-ID: <125460.52837.qm@web101714.mail.ssk.yahoo.co.jp> In-Reply-To: <81B9B540-B1CB-406F-9F51-FDBDB451B4FC@gmail.com> References: <705503.18629.qm@web101707.mail.ssk.yahoo.co.jp> <CAJ-Vmomju=NVyhcG5K2UdDwXJZX%2Bc41onn8qUqzGzBW-wYPcSQ@mail.gmail.com> <81B9B540-B1CB-406F-9F51-FDBDB451B4FC@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi I build for BCM box at sys/mips/brodecom today. This build have same panic. CFE> boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os: Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ........... 3446116 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 entry: mips_init() Cache info: picache_stride = 4096 picache_loopcount = 4 pdcache_stride = 4096 pdcache_loopcount = 4 cpu0: Broadcom processor v41.144 MMU: Standard TLB, 32 entries (1K 4K 16K 64K 256K 1M 16M 64M 256M pg sizes) L1 i-cache: 4 ways of 256 sets, 16 bytes per line L1 d-cache: 2 ways of 512 sets, 16 bytes per line L2 cache: disabled Config1=0x3e9b6c86<MIPS16,EJTAG> KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #3 7c2f7cf(zrouter)-dirty: Mon Aug 29 11:41:45 JST 2016 hiroki@microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/ mips.mipsel/storage/home/hiroki/freebsd/sys/Buffalo_WHR-HP-G54 mips gcc version 4.2.1 20070831 patched [FreeBSD] real memory = 16125952 (15748K bytes) avail memory = 11137024 (10MB) nexus0: <MIPS32 root nexus> bhnd0: <BCM5354 SIBA bus> at mem 0x18000000-0x180fffff on nexus0 bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 20> mem 0x18000000-0x18000 dff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x1a000000-0x1bffffff at core 0 on bhnd0 bhnd_mips0: <Broadcom MIPS3302 Core, rev 8> mem 0x18002000-0x18002dff at core 2 on bhnd0 cpupic0: <MIPS32 Interrupt Controller> on nexus0 bhnd_pmu0: <Broadcom ChipCommon PMU, rev 0> on bhnd_chipc0 bhnd0: error reading BOARDVENDOR: 19 bhnd_pmu0: error fetching board info: 19 device_attach: bhnd_pmu0 attach returned 6 nvram2env0: Found NVRAM at 0x1fc00400 nvram2env0: <NVRAM to ENV pseudo-device> on nexus0 nvram2env0: sig = 0x48534c46 nvram2env0: size = 0x2f0 nvram2env1: Found NVRAM at 0x1c7f8000 nvram2env1: <NVRAM to ENV pseudo-device> on nexus0 nvram2env1: sig = 0x48534c46 nvram2env1: size = 0x344 clock0: <Generic MIPS32 ticker> on nexus0 panic: Unable to add hard IRQ 7 handler KDB: enter: panic [ thread pid 0 tid 100000 ] Stopped at kdb_enter+0x4c: lui at,0x8036 ----- Original Message ----- > From: Stanislav Galabov <sgalabov@gmail.com> > To: Adrian Chadd <adrian.chadd@gmail.com> > Cc: Mori Hiroki <yamori813@yahoo.co.jp>; "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> > Date: 2016/8/26, Fri 01:31 > Subject: Re: sys/mips/mediatek kernel crash on RT3050 > > Hi all, > > I am currently on vacation and will be back next week. I guess I'll find > some time to look at this then if needed. > > Best wishes, > Stanislav > >> On Aug 25, 2016, at 18:25, Adrian Chadd <adrian.chadd@gmail.com> > wrote: >> >> Hm, does it require INTRNG these days? >> >> >> -a >> >> >>> On 24 August 2016 at 18:11, Mori Hiroki <yamori813@yahoo.co.jp> > wrote: >>> Hi >>> >>> I build sys/mips/mediatek for RT3050 box at few days before head. >>> >>> This kernel crash. >>> >>> This build based on rt3050.dtsi. >>> >>> Some one know this problem ? >>> >>> Thanks. >>> >>> Starting kernel ... >>> >>> FDT DTB at: 0x802ce6f0 >>> CPU clock: 320MHz >>> Timer clock: 160MHz >>> UART clock: 106MHz >>> >>> U-Boot args (from 0 args): >>> None >>> Environment: >>> entry: mips_init() >>> RAM size: 32MB (assumed) >>> Cache info: >>> picache_stride = 4096 >>> picache_loopcount = 8 >>> pdcache_stride = 4096 >>> pdcache_loopcount = 4 >>> cpu0: MIPS Technologies processor v76.150 >>> MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg > sizes) >>> L1 i-cache: 4 ways of 256 sets, 32 bytes per line >>> L1 d-cache: 4 ways of 128 sets, 32 bytes per line >>> L2 cache: disabled >>> Config1=0xbea3319e<PerfCount,WatchRegs,MIPS16,EJTAG> >>> Config2=0x80000000 >>> Config3=0x420 >>> Physical memory chunk(s): >>> 0x334000 - 0x1ffffff, 30195712 bytes (7372 pages) >>> Maxmem is 0x2000000 >>> Copyright (c) 1992-2016 The FreeBSD Project. >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 >>> The Regents of the University of California. All rights > reserved. >>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>> FreeBSD 12.0-CURRENT #1 ed1832a(zrouter): Sun Aug 21 12:19:54 JST 2016 >>> > hiroki@microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/ >>> mips.mipsel/storage/home/hiroki/freebsd/sys/Fon_FON2305E_FDT mips >>> gcc version 4.2.1 20070831 patched [FreeBSD] >>> Preloaded elf kernel "kernel" at 0x8032afb0. >>> real memory = 33554432 (32768K bytes) >>> Physical memory chunk(s): >>> 0x003c0000 - 0x01f3efff, 28831744 bytes (7039 pages) >>> avail memory = 28397568 (27MB) >>> ULE: setup cpu 0 >>> random: entropy device external interface >>> firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0x802d86d0 >>> firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0x802d2550 >>> firmware: 'rt2561sfw' version 0: 8192 bytes loaded at > 0x802d45d0 >>> wlan: <802.11 Link Layer> >>> firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0x802d6650 >>> null: <full device, null device, zero device> >>> openfirm: <Open Firmware control device> >>> mem: <memory> >>> nexus0: <MIPS32 root nexus> >>> random: harvesting attach, 8 bytes (4 bits) from nexus0 >>> ofwbus0: <Open Firmware Device Tree> on nexus0 >>> palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on ofwbus0 >>> random: harvesting attach, 8 bytes (4 bits) from palmbus0 >>> random: harvesting attach, 8 bytes (4 bits) from ofwbus0 >>> cpupic0: <MIPS32 Interrupt Controller> on ofwbus0 >>> random: harvesting attach, 8 bytes (4 bits) from cpupic0 >>> sysc0: <MTK System Controller> mem 0-0xff on palmbus0 >>> random: harvesting attach, 8 bytes (4 bits) from sysc0 >>> pinctrl0: <MTK Pin Controller> on ofwbus0 >>> pinctrl0: GPIO mode start: 0x0000029d >>> Processing 1 pin-config node(s) in pinctrl-0 for spi@b00 >>> Processing 1 pin-config node(s) in pinctrl-0 for uartlite@c00 >>> Processing 1 pin-config node(s) in pinctrl-0 for pinctrl >>> pinctrl0: GPIO mode end : 0x0000005d >>> random: harvesting attach, 8 bytes (4 bits) from pinctrl0 >>> rstctrl0: <MTK Reset Controller> on ofwbus0 >>> random: harvesting attach, 8 bytes (4 bits) from rstctrl0 >>> clkctrl0: <MTK Clock Controller> on ofwbus0 >>> random: harvesting attach, 8 bytes (4 bits) from clkctrl0 >>> intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 6 on > palmbus0 >>> random: harvesting attach, 8 bytes (4 bits) from intc0 >>> gpio0: <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 9 on > palmbus0 >>> gpiobus0: <OFW GPIO bus> on gpio0 >>> random: harvesting attach, 8 bytes (4 bits) from gpiobus0 >>> random: harvesting attach, 8 bytes (4 bits) from gpio0 >>> palmbus0: <timer@100> mem 0x100-0x11f irq 4 compat > ralink,rt3050-timer (no drive >>> r attached) >>> palmbus0: <watchdog@120> mem 0x120-0x12f irq 5 compat > ralink,rt3050-wdt (no driv >>> er attached) >>> palmbus0: <memc@300> mem 0x300-0x3ff irq 7 compat > ralink,rt3050-memc (no driver >>> attached) >>> palmbus0: <uart@500> mem 0x500-0x5ff irq 8 disabled compat > ralink,rt3050-uart (n >>> o driver attached) >>> gpioled0: <GPIO led> at pin 14 on gpiobus0 >>> random: harvesting attach, 8 bytes (4 bits) from gpioled0 >>> gpioled1: <GPIO led> at pin 11 on gpiobus0 >>> random: harvesting attach, 8 bytes (4 bits) from gpioled1 >>> gpioled2: <GPIO led> at pin 9 on gpiobus0 >>> random: harvesting attach, 8 bytes (4 bits) from gpioled2 >>> gpioled3: <GPIO led> at pin 12 on gpiobus0 >>> random: harvesting attach, 8 bytes (4 bits) from gpioled3 >>> gpioc0: <GPIO controller> on gpio0 >>> random: harvesting attach, 8 bytes (4 bits) from gpioc0 >>> palmbus0: <gpio@638> mem 0x638-0x65b disabled compat > ralink,rt3050-gpio (no driv >>> er attached) >>> palmbus0: <gpio@660> mem 0x660-0x683 disabled compat > ralink,rt3050-gpio (no driv >>> er attached) >>> spi0: <MTK SPI Controller (v1)> mem 0xb00-0xbff on palmbus0 >>> spibus0: <OFW SPI bus> on spi0 >>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 >>> mx25l0: mx25ll64, sector 65536 bytes, 128 sectors >>> random: harvesting attach, 8 bytes (4 bits) from mx25l0 >>> random: harvesting attach, 8 bytes (4 bits) from spibus0 >>> random: harvesting attach, 8 bytes (4 bits) from spi0 >>> uart0: <MTK UART Controller> mem 0xc00-0xcff irq 10 on palmbus0 >>> uart0: console (57971,n,8,1) >>> uart0: fast interrupt >>> uart0: PPS capture mode: DCDinvalid >>> random: harvesting attach, 8 bytes (4 bits) from uart0 >>> ofwbus0: <usbphy> compat ralink,rt3050-usbphy (no driver > attached) >>> rt0: <Ralink RT3050 onChip Ethernet driver> mem > 0x10100000-0x1010ffff irq 0 on o >>> fwbus0 >>> rt0: RT305XF Ethernet MAC (rev 0x00000000) >>> rt0: use hardcoded 00:18:e7:d5:83:90 macaddr >>> rt0: bpf attached >>> rt0: Ethernet address: 00:18:e7:d5:83:90 >>> random: harvesting attach, 8 bytes (4 bits) from rt0 >>> mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff irq 1 > on ofwbus0 >>> miibus0: <MII bus> on mtkswitch0 >>> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 >>> ukphy0: OUI 0x000c43, model 0x0001, rev. 7 >>> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> random: harvesting attach, 8 bytes (4 bits) from ukphy0 >>> random: harvesting attach, 8 bytes (4 bits) from miibus0 >>> miibus1: <MII bus> on mtkswitch0 >>> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 >>> ukphy1: OUI 0x000c43, model 0x0001, rev. 7 >>> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> random: harvesting attach, 8 bytes (4 bits) from ukphy1 >>> random: harvesting attach, 8 bytes (4 bits) from miibus1 >>> miibus2: <MII bus> on mtkswitch0 >>> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 >>> ukphy2: OUI 0x000c43, model 0x0001, rev. 7 >>> ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> random: harvesting attach, 8 bytes (4 bits) from ukphy2 >>> random: harvesting attach, 8 bytes (4 bits) from miibus2 >>> miibus3: <MII bus> on mtkswitch0 >>> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 >>> ukphy3: OUI 0x000c43, model 0x0001, rev. 7 >>> ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> random: harvesting attach, 8 bytes (4 bits) from ukphy3 >>> random: harvesting attach, 8 bytes (4 bits) from miibus3 >>> miibus4: <MII bus> on mtkswitch0 >>> ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 >>> ukphy4: OUI 0x000c43, model 0x0001, rev. 7 >>> ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> random: harvesting attach, 8 bytes (4 bits) from ukphy4 >>> random: harvesting attach, 8 bytes (4 bits) from miibus4 >>> etherswitch0: <Switch controller> on mtkswitch0 >>> random: harvesting attach, 8 bytes (4 bits) from etherswitch0 >>> mdio0: <MDIO> on mtkswitch0 >>> random: harvesting attach, 8 bytes (4 bits) from mdio0 >>> random: harvesting attach, 8 bytes (4 bits) from mtkswitch0 >>> ofwbus0: <wmac@10180000> mem 0x10180000-0x101bffff irq 2 compat > ralink,rt3050-wm >>> ac (no driver attached) >>> ofwbus0: <otg@101c0000> mem 0x101c0000-0x101fffff irq 3 disabled > compat ralink,r >>> t3050-otg (no driver attached) >>> ofwbus0: <gpio-leds> compat gpio-leds (no driver attached) >>> ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no driver > attached) >>> clock0: <Generic MIPS32 ticker> on nexus0 >>> panic: Unable to add hard IRQ 7 handler >>> Uptime: 1s >>> Automatic reboot in 15 seconds - press a key on the console to abort >>> Rebooting... >>> _______________________________________________ >>> freebsd-mips@freebsd.org mailing list >>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips >>> To unsubscribe, send any mail to > "freebsd-mips-unsubscribe@freebsd.org" >> _______________________________________________ >> freebsd-mips@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-mips >> To unsubscribe, send any mail to > "freebsd-mips-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?125460.52837.qm>