Date: Thu, 07 Jan 2016 16:31:50 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-scsi@FreeBSD.org Subject: [Bug 191717] [isci] smartctl -H gives "ATA output registers missing" for a disk using the isci driver Message-ID: <bug-191717-5312-OP8cyh3m4R@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-191717-5312@https.bugs.freebsd.org/bugzilla/>
index | next in thread | previous in thread | raw e-mail
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=191717 --- Comment #8 from Matthew L. Dailey <matthew.l.dailey@dartmouth.edu> --- FWIW, I think I've run into this on one of my systems running FreeBSD 10.2-RELEASE-p7 amd64 and smartctl 6.4 2015-06-04 r4109. Unfortunately, this system is in production, so I can't try the kernel patch in this bug report, but wanted to pass along this info in case it was helpful. If I find another system exhibiting this behavior or am able to test the kernel patch on this system, I'll update again. The hardware looks like this (from dmesg): ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device da0 at isci0 bus 0 scbus0 target 0 lun 0 da0: <ATA WDC WD1002F9YZ-0 1M03> Fixed Direct Access SCSI-5 device da1 at isci0 bus 0 scbus0 target 1 lun 0 da1: <ATA INTEL SSDSC2BA10 0270> Fixed Direct Access SCSI-5 device da0: Serial Number BTTV4494014Z100FGN da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 95396MB (195371568 512 byte sectors: 255H 63S/T 12161C) da2 at isci0 bus 0 scbus0 target 2 lun 0 da3 at isci0 bus 0 scbus0 target 3 lun 0 da2: <ATA WDC WD1002F9YZ-0 1M03> Fixed Direct Access SCSI-5 device da3: <ATA WDC WD1002F9YZ-0 1M03> Fixed Direct Access SCSI-5 device da1: Serial Number WD-WMC5K0D20LKL da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) da2: Serial Number WD-WMC5K0D1AM6Y da3: Serial Number WD-WMC5K0DAKT6E da2: 300.000MB/s transfers da3: 300.000MB/s transfers da2: Command Queueing enabled da2: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) da3: Command Queueing enabled da3: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) Running smartctl -H on any of these devices shows this: # smartctl -H /dev/da0 smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.2-RELEASE-p7 amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. Full output is: # smartctl -H -r ioctl,2 /dev/da0 smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.2-RELEASE-p7 amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org [inquiry: 12 00 00 00 24 00 ] CAM status=0x1, SCSI status=0x0, resid=0x0 Incoming data, len=36: 00 00 00 05 02 3e 00 00 02 41 54 41 20 20 20 20 20 10 49 4e 54 45 4c 20 53 53 44 53 43 32 42 41 31 30 20 30 32 37 30 status=0x0 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] CAM status=0x1, SCSI status=0x0, resid=0x0 Incoming data, len=512 [only first 256 bytes shown]: 00 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 54 42 56 54 34 34 34 39 31 30 5a 34 20 30 31 46 30 4e 47 20 20 00 00 00 00 00 00 44 35 30 31 56 32 30 30 37 4e 49 45 54 20 4c 53 53 53 44 40 32 43 41 42 30 31 47 30 20 33 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 01 80 60 00 40 00 2f 00 40 00 00 00 00 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 01 b1 30 22 a5 0b 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 30 40 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e 85 04 00 40 00 40 00 a0 fc 03 10 01 6b 74 01 75 63 61 69 74 01 b4 63 61 b0 7f 40 02 00 02 00 00 00 fe ff 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 30 22 a5 0b 00 00 00 00 d0 00 00 06 00 03 60 00 00 cd 55 40 2e 73 4b af 5d e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5c 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/da0 Command=IDENTIFY DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] CAM status=0x1, SCSI status=0x0, resid=0x0 Incoming data, len=512 [only first 256 bytes shown]: 00 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 54 42 56 54 34 34 34 39 31 30 5a 34 20 30 31 46 30 4e 47 20 20 00 00 00 00 00 00 44 35 30 31 56 32 30 30 37 4e 49 45 54 20 4c 53 53 53 44 40 32 43 41 42 30 31 47 30 20 33 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 01 80 60 00 40 00 2f 00 40 00 00 00 00 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 01 b1 30 22 a5 0b 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 30 40 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e 85 04 00 40 00 40 00 a0 fc 03 10 01 6b 74 01 75 63 61 69 74 01 b4 63 61 b0 7f 40 02 00 02 00 00 00 fe ff 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 30 22 a5 0b 00 00 00 00 d0 00 00 06 00 03 60 00 00 cd 55 40 2e 73 4b af 5d e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5c 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 [Duration: 0.001s] REPORT-IOCTL: Device=/dev/da0 Command=IDENTIFY DEVICE returned 0 ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 000-015: 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |@..?7.......?...| 016-031: 00 00 00 00 54 42 56 54 34 34 34 39 31 30 5a 34 |....TBVT444910Z4| 032-047: 30 31 46 30 4e 47 20 20 00 00 00 00 00 00 44 35 |01F0NG ......D5| 048-063: 31 56 32 30 30 37 4e 49 45 54 20 4c 53 53 53 44 |1V2007NIET LSSSD| 064-079: 32 43 41 42 30 31 47 30 20 33 20 20 20 20 20 20 |2CAB01G0 3 | 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 01 80 | ..| 096-111: 00 40 00 2f 00 40 00 00 00 00 07 00 ff 3f 10 00 |.@./.@.......?..| 112-127: 3f 00 10 fc fb 00 01 b1 30 22 a5 0b 00 00 07 00 |?.......0"......| 128-143: 03 00 78 00 78 00 78 00 78 00 30 40 00 00 00 00 |..x.x.x.x.0@....| 144-159: 00 00 00 00 00 00 1f 00 0e 85 04 00 40 00 40 00 |............@.@.| 160-175: fc 03 10 01 6b 74 01 75 63 61 69 74 01 b4 63 61 |....kt.ucait..ca| 176-191: 7f 40 02 00 02 00 00 00 fe ff 00 00 00 00 00 00 |.@..............| 192-207: 00 00 00 00 00 00 00 00 30 22 a5 0b 00 00 00 00 |........0"......| 208-223: 00 00 06 00 03 60 00 00 cd 55 40 2e 73 4b af 5d |.....`...U@.sK.]| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5c 40 |..............\@| 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............| 256-271: 21 00 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 |!...............| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 03 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 | | 368-383: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 | | 384-399: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 | | 400-415: 20 20 20 20 20 20 20 20 20 20 20 20 3d 00 00 00 | =...| 416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |...@............| 432-447: 00 00 01 00 00 00 00 00 00 00 00 00 1f 10 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 01 00 ff ff 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 22 |..............."| ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== REPORT-IOCTL: Device=/dev/da0 Command=SMART READ ATTRIBUTE VALUES Input: FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN [ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ] CAM status=0x1, SCSI status=0x0, resid=0x0 Incoming data, len=512 [only first 256 bytes shown]: 00 01 00 05 32 00 64 64 00 00 00 00 00 00 00 09 32 10 00 64 64 c0 1d 00 00 00 00 00 0c 32 00 64 64 0c 20 00 00 00 00 00 00 aa 33 00 64 64 00 00 00 00 00 30 00 00 ab 32 00 64 64 00 00 00 00 00 00 00 ac 32 40 00 64 64 00 00 00 00 00 00 00 ae 32 00 64 64 08 50 00 00 00 00 00 00 af 33 00 64 64 66 02 a7 1e 2d 60 00 00 b7 32 00 64 64 00 00 00 00 00 00 00 b8 33 70 00 64 64 00 00 00 00 00 00 00 bb 32 00 64 64 00 80 00 00 00 00 00 00 be 22 00 50 4e 14 00 13 1c 00 90 00 00 c0 32 00 64 64 08 00 00 00 00 00 00 c2 22 a0 00 64 64 1b 00 00 00 00 00 00 c5 32 00 64 64 00 b0 00 00 00 00 00 00 c7 3e 00 64 64 00 00 00 00 00 c0 00 00 e1 32 00 64 64 9b 17 1f 00 00 00 00 e2 32 d0 00 64 64 14 08 00 00 00 00 00 e3 32 00 64 64 05 e0 00 00 00 00 00 00 e4 32 00 64 64 ec f8 06 00 00 f0 00 00 e8 33 00 64 64 00 00 00 00 00 00 00 e9 32 status=0x0 [Duration: 0.001s] REPORT-IOCTL: Device=/dev/da0 Command=SMART READ ATTRIBUTE VALUES returned 0 ===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) ===== 000-015: 01 00 05 32 00 64 64 00 00 00 00 00 00 00 09 32 |...2.dd........2| 016-031: 00 64 64 c0 1d 00 00 00 00 00 0c 32 00 64 64 0c |.dd........2.dd.| 032-047: 00 00 00 00 00 00 aa 33 00 64 64 00 00 00 00 00 |.......3.dd.....| 048-063: 00 00 ab 32 00 64 64 00 00 00 00 00 00 00 ac 32 |...2.dd........2| 064-079: 00 64 64 00 00 00 00 00 00 00 ae 32 00 64 64 08 |.dd........2.dd.| 080-095: 00 00 00 00 00 00 af 33 00 64 64 66 02 a7 1e 2d |.......3.ddf...-| 096-111: 00 00 b7 32 00 64 64 00 00 00 00 00 00 00 b8 33 |...2.dd........3| 112-127: 00 64 64 00 00 00 00 00 00 00 bb 32 00 64 64 00 |.dd........2.dd.| 128-143: 00 00 00 00 00 00 be 22 00 50 4e 14 00 13 1c 00 |.......".PN.....| 144-159: 00 00 c0 32 00 64 64 08 00 00 00 00 00 00 c2 22 |...2.dd........"| 160-175: 00 64 64 1b 00 00 00 00 00 00 c5 32 00 64 64 00 |.dd........2.dd.| 176-191: 00 00 00 00 00 00 c7 3e 00 64 64 00 00 00 00 00 |.......>.dd.....| 192-207: 00 00 e1 32 00 64 64 9b 17 1f 00 00 00 00 e2 32 |...2.dd........2| 208-223: 00 64 64 14 08 00 00 00 00 00 e3 32 00 64 64 05 |.dd........2.dd.| 224-239: 00 00 00 00 00 00 e4 32 00 64 64 ec f8 06 00 00 |.......2.dd.....| 240-255: 00 00 e8 33 00 64 64 00 00 00 00 00 00 00 e9 32 |...3.dd........2| 256-271: 00 62 62 00 00 00 00 00 00 00 ea 32 00 64 64 00 |.bb........2.dd.| 272-287: 00 00 00 00 00 00 f1 32 00 64 64 9b 17 1f 00 00 |.......2.dd.....| 288-303: 00 00 f2 32 00 64 64 89 a5 01 00 00 00 00 00 00 |...2.dd.........| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 79 |...............y| 368-383: 03 00 01 00 01 02 02 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2e |................| ===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) ===== REPORT-IOCTL: Device=/dev/da0 Command=SMART READ ATTRIBUTE THRESHOLDS Input: FR=0xd1, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN [ata pass-through(16): 85 08 0e 00 d1 00 01 00 01 00 4f 00 c2 00 b0 00 ] CAM status=0x1, SCSI status=0x0, resid=0x0 Incoming data, len=512 [only first 256 bytes shown]: 00 01 00 05 00 00 00 00 00 00 00 00 00 00 00 09 00 10 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 20 00 00 00 00 00 00 aa 0a 00 00 00 00 00 00 00 00 30 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00 40 00 00 00 00 00 00 00 00 00 00 ae 00 00 00 00 00 50 00 00 00 00 00 00 af 0a 00 00 00 00 00 00 00 00 60 00 00 b7 00 00 00 00 00 00 00 00 00 00 00 b8 5a 70 00 00 00 00 00 00 00 00 00 00 bb 00 00 00 00 00 80 00 00 00 00 00 00 be 00 00 00 00 00 00 00 00 00 90 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 c2 00 a0 00 00 00 00 00 00 00 00 00 00 c5 00 00 00 00 00 b0 00 00 00 00 00 00 c7 00 00 00 00 00 00 00 00 00 c0 00 00 e1 00 00 00 00 00 00 00 00 00 00 00 e2 00 d0 00 00 00 00 00 00 00 00 00 00 e3 00 00 00 00 00 e0 00 00 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 f0 00 00 e8 0a 00 00 00 00 00 00 00 00 00 00 e9 00 status=0x0 REPORT-IOCTL: Device=/dev/da0 Command=SMART READ ATTRIBUTE THRESHOLDS returned 0 ===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) ===== 000-015: 01 00 05 00 00 00 00 00 00 00 00 00 00 00 09 00 |................| 016-031: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 |................| 032-047: 00 00 00 00 00 00 aa 0a 00 00 00 00 00 00 00 00 |................| 048-063: 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00 |................| 064-079: 00 00 00 00 00 00 00 00 00 00 ae 00 00 00 00 00 |................| 080-095: 00 00 00 00 00 00 af 0a 00 00 00 00 00 00 00 00 |................| 096-111: 00 00 b7 00 00 00 00 00 00 00 00 00 00 00 b8 5a |...............Z| 112-127: 00 00 00 00 00 00 00 00 00 00 bb 00 00 00 00 00 |................| 128-143: 00 00 00 00 00 00 be 00 00 00 00 00 00 00 00 00 |................| 144-159: 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 c2 00 |................| 160-175: 00 00 00 00 00 00 00 00 00 00 c5 00 00 00 00 00 |................| 176-191: 00 00 00 00 00 00 c7 00 00 00 00 00 00 00 00 00 |................| 192-207: 00 00 e1 00 00 00 00 00 00 00 00 00 00 00 e2 00 |................| 208-223: 00 00 00 00 00 00 00 00 00 00 e3 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 e8 0a 00 00 00 00 00 00 00 00 00 00 e9 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 ea 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 f1 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 f2 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 |................| ===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) ===== === START OF READ SMART DATA SECTION === REPORT-IOCTL: Device=/dev/da0 Command=SMART STATUS CHECK Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ] CAM status=0x8c, SCSI status=0x2, resid=0x0 sense_len=0x20, sense_resid=0xe >>> Sense buffer, len=18: 00 f0 00 01 00 50 00 00 00 00 c2 4f 00 00 1d 00 00 10 00 00 status=0x2: sense_key=0x1 asc=0x0 ascq=0x1d [Duration: 0.001s] REPORT-IOCTL: Device=/dev/da0 Command=SMART STATUS CHECK returned -1 errno=78 [Incomplete response, ATA output registers missing] SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. -- You are receiving this mail because: You are the assignee for the bug.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-191717-5312-OP8cyh3m4R>