Date: Thu, 01 Nov 2018 18:35:28 +0000 From: bugzilla-noreply@freebsd.org To: amd64@FreeBSD.org Subject: [Bug 130483] [mxge] MSI must be disabled when Myricom 10Gbps Card is used on Dell PowerEdge T300 Server Message-ID: <bug-130483-17361-q9Ce95nDm0@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-130483-17361@https.bugs.freebsd.org/bugzilla/> References: <bug-130483-17361@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D130483 --- Comment #6 from commit-hook@freebsd.org --- A commit references this bug: Author: jhb Date: Thu Nov 1 18:34:29 UTC 2018 New revision: 340016 URL: https://svnweb.freebsd.org/changeset/base/340016 Log: MFC 338360,338415,338624,338630,338631,338725: Dynamic x86 IRQ layout. 338360: Dynamically allocate IRQ ranges on x86. Previously, x86 used static ranges of IRQ values for different types of I/O interrupts. Interrupt pins on I/O APICs and 8259A PICs used IRQ values from 0 to 254. MSI interrupts used a compile-time-defined range starting at 256, and Xen event channels used a compile-time-defined range after MSI. Some recent systems have more than 255 I/O APIC interrupt pins which resulted in those IRQ values overflowing into the MSI range triggering an assertion failure. Replace statically assigned ranges with dynamic ranges. Do a single pass computing the sizes of the IRQ ranges (PICs, MSI, Xen) to determine the total number of IRQs required. Allocate the interrupt source and interrupt count arrays dynamically once this pass has completed. To minimize runtime complexity these arrays are only sized once during bootup. The PIC range is determined by the PICs present in the system. The MSI and Xen ranges continue to use a fixed size, though this does make it possible to turn the MSI range size into a tunable in the future. As a result, various places are updated to use dynamic limits instead of constants. In addition, the vmstat(8) utility has been taught to understand that some kernels may treat 'intrcnt' and 'intrnames' as pointers rather than arrays when extracting interrupt stats from a crashdump. This is determined by the presence (vs absence) of a global 'nintrcnt' symbol. This change reverts r189404 which worked around a buggy BIOS which enumerated an I/O APIC twice (using the same memory mapped address for both entries but using an IRQ base of 256 for one entry and a valid IRQ base for the second entry). Making the "base" of MSI IRQ values dynamic avoids the panic that r189404 worked around, and there may now be valid I/O APICs with an IRQ base above 256 which this workaround would incorrectly skip. If in the future the issue reported in PR 130483 reoccurs, we will have to add a pass over the I/O APIC entries in the MADT to detect duplicates using the memory mapped address and use some strategy to choose the "correct" one. While here, reserve room in intrcnts for the Hyper-V counters. 338415: Fix build of x86 UP kernels after dynamic IRQ changes in r338360. 338624: msi: remove the check that interrupt sources have been added When running as a specific type of Xen guest the hypervisor won't provide any emulated IO-APICs or legacy PICs at all, thus hitting the following assert in the MSI code: panic: Assertion num_io_irqs > 0 failed at /usr/src/sys/x86/x86/msi.c:334 cpuid =3D 0 time =3D 1 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff826ffa70 vpanic() at vpanic+0x1a3/frame 0xffffffff826ffad0 panic() at panic+0x43/frame 0xffffffff826ffb30 msi_init() at msi_init+0xed/frame 0xffffffff826ffb40 apic_setup_io() at apic_setup_io+0x72/frame 0xffffffff826ffb50 mi_startup() at mi_startup+0x118/frame 0xffffffff826ffb70 start_kernel() at start_kernel+0x10 Fix this by removing the assert in the MSI code, since it's possible to get to the MSI initialization without having registered any other interrupt sources. 338630: lapic: skip setting intrcnt if lapic is not present Instead of panicking. Legacy PVH mode doesn't provide a lapic, and since native_lapic_intrcnt is called unconditionally this would cause the assert to trigger. Change the assert into a continue in order to take into account the possibility of systems without a lapic. 338631: xen: legacy PVH fixes for the new interrupt count Register interrupts using the PIC pic_register_sources method instead of doing it in apic_setup_io. This is now required, since the internal interrupt structures are not yet setup when calling apic_setup_io. 338725: Fix a regression in r338360 when booting an x86 machine without APIC. The atpic_register_sources callback tries to avoid registering interrupt sources that would collide with an I/O APIC. However, the previous implementation was failing to register IRQs 8-15 since the slave PIC saw valid IRQs from the master and assumed an I/O APIC was present. To fix, go back to registering all 8259A interrupt sources in one loop when the master's register_sources method is invoked. PR: 229429, 130483, 231291 Changes: _U stable/11/ stable/11/sys/sys/interrupt.h stable/11/sys/x86/acpica/madt.c stable/11/sys/x86/include/apicvar.h stable/11/sys/x86/include/intr_machdep.h stable/11/sys/x86/iommu/intel_intrmap.c stable/11/sys/x86/isa/atpic.c stable/11/sys/x86/x86/intr_machdep.c stable/11/sys/x86/x86/io_apic.c stable/11/sys/x86/x86/local_apic.c stable/11/sys/x86/x86/msi.c stable/11/sys/x86/x86/nexus.c stable/11/sys/x86/xen/pvcpu_enum.c stable/11/sys/x86/xen/xen_intr.c stable/11/sys/x86/xen/xen_msi.c stable/11/sys/x86/xen/xen_nexus.c stable/11/sys/xen/xen_intr.h stable/11/usr.bin/vmstat/vmstat.c --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-130483-17361-q9Ce95nDm0>