Date: Sat, 8 Sep 2018 14:07:46 -0400 From: Josh Endries <josh@endries.org> To: freebsd-hardware@freebsd.org Subject: Problem with FreeBSD 11.2 and LSI 9341-8i Message-ID: <CANeBKNR74m3_Od4A9=EGH%2BtkPYRGMk4qNuB6X2ToYVrKH3UGYQ@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I just got an LSI 9341-8i card and I'm having some trouble getting it to work in a new install of 11.2-RELEASE. I'm trying to replace an old 9.x FreeNAS box with a new machine. I have one drive connected for testing. I haven't set anything up, it's just JBOD (which is what I want anyway). The BIOS seems to see the drive and controller, and in FreeBSD when I boot I see this: AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd mfi0: <Fury> port 0xd000-0xd0ff mem 0xfe720000-0xfe72ffff,0xfe600000-0xfe6fffff irq 19 at device 0.0 on pci2 mfi0: Using MSI mfi0: Megaraid SAS driver Ver 4.23 mfi0: FW MaxCmds = 240, limiting to 128 mfi0: MaxCmd = 240, Drv MaxCmd = 128, MaxSgl = 70, state = 0xbf3c00f0 mfi0: Init command Failed 0x3 mfi0: TB Init has failed with error 3 device_attach: mfi0 attach returned 3 I haven't found anything on Google. I read on the mfi man page (I think) that I should enable mrsas for these cards, so I added hwmfi.mrsas_enable="1" to /boot/device.hints, but that didn't help. I have nothing related in /dev, no disk or even a controller node, so I can't update the firmware or do anything else... I'm not sure what else to try. For now I'm going to try 10.x instead and see if that works, though I would of course rather use the latest version. Josh
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANeBKNR74m3_Od4A9=EGH%2BtkPYRGMk4qNuB6X2ToYVrKH3UGYQ>