Date: Sun, 18 Aug 2019 10:47:46 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: Emmanuel Vadot <manu@bidouilliste.com> Cc: "freebsd-arm@freebsd.org" <arm@freebsd.org> Subject: Re: boot hangs in nanopi-neo Message-ID: <EE2DB512-1729-482B-8706-85A4029E08F1@cs.huji.ac.il> In-Reply-To: <20190817203259.e028141082262cd0dda70c68@bidouilliste.com> References: <116689BE-9231-4591-BFBB-8E823931D2D2@cs.huji.ac.il> <20190817203259.e028141082262cd0dda70c68@bidouilliste.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> On 17 Aug 2019, at 21:32, Emmanuel Vadot <manu@bidouilliste.com> =
wrote:
>=20
> On Sat, 17 Aug 2019 19:55:13 +0300
> Daniel Braniss <danny@cs.huji.ac.il> wrote:
>=20
>> after some months, I decided to upgrade, but now it stucks here:
>> ?
>>=20
>> FreeBSD 13.0-CURRENT #13 r351126M: Sat Aug 17 13:19:09 IDT 2019
>> =
danny@pe-44:/home/obj/pe-44/arm/neo/r+d/vanilla/13/arm.armv7/r+d/vanilla/1=
3/sys/AWG arm
>> FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on =
LLVM 8.0.1)
>> WARNING: WITNESS option enabled, expect reduced performance.
>> ?
>>=20
>> hub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on =
usbus3
>> mmcsd0: 8GB <SDHC SL08G 8.0 SN 6C912A00 MFG 10/2017 by 3 SD> at mmc0 =
50.0MHz/4bit/32768-block
>> Release A
>>=20
>> at which point it hangs solid.
>>=20
>> BTW, I installed a newer u-boot (maybe it?s not the very latest)
>>=20
>> this is the full console output:
>>=20
>> USB Device(s) found
>> scanning bus 1 for devices... 1 USB Device(s) found
>> scanning bus 2 for devices... 1 USB Device(s) found
>> scanning bus 3 for devices... 1 USB Device(s) found
>> scanning usb for storage devices... 0 Storage Device(s) found
>> Hit any key to stop autoboot: 0=20
>> switch to partitions #0, OK
>> mmc0 is current device
>> Scanning mmc 0:1...
>> Found U-Boot script /boot.scr
>> 199 bytes read in 0 ms
>> ## Executing script at 43100000
>> 384788 bytes read in 24 ms (15.3 MiB/s)
>> ## Starting application at 0x42000000 ...
>> Consoles: U-Boot console =20
>> Compatible U-Boot API signature found @0x5bf6bca0
>>=20
>> FreeBSD/armv7 U-Boot loader, Revision 1.3
>> (Sat Aug 17 12:49:43 IDT 2019 danny@pe-44)
>>=20
>> DRAM: 512MB
>> Number of U-Boot devices: 1
>> U-Boot env: loaderdev not set, will probe all devices.
>> Found U-Boot device: disk
>> Probing all <unknown> devices...
>> Checking unit=3D0 slice=3D<auto> partition=3D<auto>... good.
>> Booting from disk0s2a:
>> Loading /boot/defaults/loader.conf
>> Loading /boot/device.hints
>> Loading /boot/loader.conf
>> Loading /boot/loader.conf.local
>> Loading kernel...
>> /boot/kernel/kernel text=3D0x870a68 data=3D0xb4e18+0x259768 =
syms=3D[0x4+0xaa340+0x4+0x10d2ac]
>> Loading configured modules...
>> can't find '/boot/entropy'
>>=20
>> Hit [Enter] to boot immediately, or any other key for command prompt.
>> Booting [/boot/kernel/kernel]... =20
>> /boot/dtb/sun8i-h3-nanopi-neo.dtb size=3D0x64d1
>> Loaded DTB from file 'sun8i-h3-nanopi-neo.dtb'.
>> Kernel entry at 0x42400180...
>> Kernel args: (null)
>> ---<<BOOT>>---
>> KDB: debugger backends: ddb
>> KDB: current backend: ddb
>> Copyright (c) 1992-2019 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, =
1994
>> The Regents of the University of California. All rights =
reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 13.0-CURRENT #13 r351126M: Sat Aug 17 13:19:09 IDT 2019
>> =
danny@pe-44:/home/obj/pe-44/arm/neo/r+d/vanilla/13/arm.armv7/r+d/vanilla/1=
3/sys/AWG arm
>> FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on =
LLVM 8.0.1)
>> WARNING: WITNESS option enabled, expect reduced performance.
>> VT: init without driver.
>> module_register: cannot register ofwbus/pcib from kernel; already =
loaded from kernel
>> Module ofwbus/pcib failed to register: 17
>> module_register: cannot register simplebus/pcib from kernel; already =
loaded from kernel
>> Module simplebus/pcib failed to register: 17
>> CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
>> CPU Features:=20
>> Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, =
VMSAv7,
>> PXN, LPAE, Coherent Walk
>> Optional instructions:=20
>> SDIV/UDIV, UMULL, SMULL, SIMD(ext)
>> LoUU:2 LoC:3 LoUIS:2=20
>> Cache level 1:
>> 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
>> 32KB/32B 2-way instruction cache Read-Alloc
>> Cache level 2:
>> 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
>> real memory =3D 536870912 (512 MB)
>> avail memory =3D 506929152 (483 MB)
>> No PSCI/SMCCC call function found
>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>> arc4random: WARNING: initial seeding bypassed the cryptographic =
random device because it was not yet seeded and the knob =
'bypass_before_seeding' was enabled.
>> random: entropy device external interface
>> kbd0 at kbdmux0
>> ofwbus0: <Open Firmware Device Tree>
>> ofw_clkbus0: <OFW clocks bus> on ofwbus0
>> clk_fixed0: <Fixed clock> on ofw_clkbus0
>> clk_fixed1: <Fixed clock> on ofw_clkbus0
>> simplebus0: <Flattened device tree simple bus> on ofwbus0
>> regfix0: <Fixed Regulator> on ofwbus0
>> regfix1: <Fixed Regulator> on ofwbus0
>> regfix2: <Fixed Regulator> on ofwbus0
>> rtc0: <Allwinner RTC> mem 0x1f00000-0x1f003ff irq 40,41 on simplebus0
>> rtc0: registered as a time-of-day clock, resolution 1.000000s
>> ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem =
0x1c20000-0x1c203ff on simplebus0
>> ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem =
0x1f01400-0x1f014ff on simplebus0
>> gic0: <ARM Generic Interrupt Controller> mem =
0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c=
87fff irq 37 on simplebus0
>> gic0: pn 0x1, arch 0x2, rev 0x1, implementer 0x43b irqs 160
>> gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq =
18,19 on simplebus0
>> gpiobus0: <OFW GPIO bus> on gpio0
>> gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq =
44 on simplebus0
>> gpiobus1: <OFW GPIO bus> on gpio1
>> generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality =
1000
>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality =
1000
>> aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
>> awusbphy0: <Allwinner USB PHY> mem =
0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803,0x1c1c800-0x1c=
1c803,0x1c1d800-0x1c1d803 on simplebus0
>> a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 4 on =
simplebus0
>> aw_mmc0: <Allwinner Integrated MMC/SD controller> mem =
0x1c0f000-0x1c0ffff irq 6 on simplebus0
>> mmc0: <MMC/SD bus> on aw_mmc0
>> ehci0: <Allwinner Integrated USB 2.0 controller> mem =
0x1c1a000-0x1c1a0ff irq 10 on simplebus0
>> usbus0: EHCI version 1.0
>> usbus0 on ehci0
>> ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 11 on =
simplebus0
>> usbus1 on ohci0
>> ehci1: <Allwinner Integrated USB 2.0 controller> mem =
0x1c1d000-0x1c1d0ff irq 16 on simplebus0
>> usbus2: EHCI version 1.0
>> usbus2 on ehci1
>> ohci1: <Generic OHCI Controller> mem 0x1c1d400-0x1c1d4ff irq 17 on =
simplebus0
>> usbus3 on ohci1
>> gpioc0: <GPIO controller> on gpio0
>> awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 22 on =
simplebus0
>> miibus0: <MII bus> on awg0
>> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
>> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, =
auto-flow
>> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, =
auto-flow
>> awg0: Ethernet address: f2:00:e7:81:61:2e
>> aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 25 on =
simplebus0
>> uart2: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 30 on =
simplebus0
>> uart2: console (115384,n,8,1)
>> gpioc1: <GPIO controller> on gpio1
>> cpulist0: <Open Firmware CPU Group> on ofwbus0
>> cpu0: <Open Firmware CPU> on cpulist0
>> cpu1: <Open Firmware CPU> on cpulist0
>> cpu2: <Open Firmware CPU> on cpulist0
>> cpu3: <Open Firmware CPU> on cpulist0
>> gpioled0: <GPIO LEDs> on ofwbus0
>> cryptosoft0: <software crypto>
>> Timecounters tick every 1.000 msec
>> usbus0: 480Mbps High Speed USB v2.0
>> usbus1: 12Mbps Full Speed USB v1.0
>> usbus2: 480Mbps High Speed USB v2.0
>> usbus3: 12Mbps Full Speed USB v1.0
>> ugen1.1: <Generic OHCI root HUB> at usbus1
>> uhub0 on usbus1
>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on =
usbus1
>> ugen0.1: <Allwinner EHCI root HUB> at usbus0
>> uhub1 on usbus0
>> uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on =
usbus0
>> ugen2.1: <Allwinner EHCI root HUB> at usbus2
>> uhub2 on usbus2
>> uhub2: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on =
usbus2
>> ugen3.1: <Generic OHCI root HUB> at usbus3
>> uhub3 on usbus3
>> uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on =
usbus3
>> mmcsd0: 8GB <SDHC SL08G 8.0 SN 6C912A00 MFG 10/2017 by 3 SD> at mmc0 =
50.0MHz/4bit/32768-block
>> Release A
>=20
> Could you boot -v please ?
I think I found the problem, lousy usb power, will confirm later.
btw, any chance to enable the sid stuff? without it the ethernet changes =
it=E2=80=99s mac
=09
/dts-v1/;
/plugin/;
/ {
compatible =3D "allwinner,sun50i-h5";
};
&{/soc} {
sid: eeprom@1c14000 {
compatible =3D "allwinner,sun50i-h5-sid";
reg =3D <0x1c14000 0x400>;
};
};
>=20
> --=20
> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?EE2DB512-1729-482B-8706-85A4029E08F1>