Date: Tue, 12 Mar 2019 15:34:08 +0000 From: Chris6 <Chris6@protonmail.com> To: "freebsd-hardware@freebsd.org" <freebsd-hardware@freebsd.org> Subject: REALTEK RTL8723BE wireless adaptor issue Message-ID: <JyeD5sIb2zkdmLr1_Ob-ETrUaKLdlIFJE5HnOmxuhahIs3Cks4rEEpiWaB1zkO_vkktOQO-nYLs_3SfbIjx8dnw9APqqC0XBsvgcRnRowFo=@protonmail.com>
index | next in thread | raw e-mail
Lenovo G50-70 (64 bit) REALTEK RTL8723BE wireless adaptor Issue: Can't get adaptor to work. Tried using ndisgen(8). Went to realtek and found netrtwlane.inf and rtwlane.sys files from the win7x86 folder and followed handbook network config directions (11.5.1.1). Any help is greatly appreciated. Please be specific enough that I can look up how-to online for any instructions. Currently using a usb adapter for wireless conncetivity but I would rather use hardware as it gets better reception and isn't sticking out of side of laptop. See dmesg and dmesg.boot below. I alsotried to do linux emulation but couldn't figure out how to load .bin file I found on github. ------DMESG.BOOT------ ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (2394.51-MHz K8-class CPU) Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16500551680 (15736 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO CB-01 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-39 on motherboard Launching APs: 1 2 3 Timecounter "TSC-low" frequency 1197256002 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO CB-01> on motherboard acpi0: Power Button (fixed) ACPI Error: No handler for Region [ERAM] (0xfffff800037b0200) [EmbeddedControl] (20181003/evregion-288) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20181003/exfldio-428) ACPI Error: Method parse/execution failed \134_SB.PCI0.LPCB.EC0.BAT0._STA, AE_NOT_EXIST (20181003/psparse-677) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x7> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xc0000000-0xc03fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xc0610000-0xc0613fff irq 16 at device 3.0 on pci0 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xc0600000-0xc060ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xc0614000-0xc0617fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xc0504000-0xc0504fff,0xc0500000-0xc0503fff irq 18 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: ASPM disabled re0: Chip rev. 0x50800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 28:d2:44:dc:d9:32 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xc061c000-0xc061c3ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x5088-0x508f,0x5094-0x5097,0x5080-0x5087,0x5090-0x5093,0x5060-0x507f mem 0xc061b000-0xc061b7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Conexant CX20751/2 HDA CODEC> at cad 0 on hdac1 hdaa1: <Conexant CX20751/2 Audio Function Group> at nid 1 on hdacc1 pcm1: <Conexant CX20751/2 (Analog)> at nid 23 and 26 on hdaa1 pcm2: <Conexant CX20751/2 (Right Analog)> at nid 22 and 25 on hdaa1 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST500LM000-SSHD-8GB LVD3> ACS-2 ATA SATA 3.x device ada0: Serial Number W7612QZ0 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <PLDS DVD-RW DA8A5SH RL61> Removable CD-ROM SCSI device cd0: Serial Number O10A11845L1CB4802XES cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus1 usbus0 uhub1: 13 ports with 13 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: <Generic USB2.0-CRW> at usbus0 ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 ugen0.3: <Bsion Corp. Lenovo EasyCamera> at usbus0 Root mount waiting for: usbus1 usbus0 uhub2: 8 ports with 8 removable, self powered ugen0.4: <Realtek Bluetooth Radio> at usbus0 lo0: link state changed to UP re0: link state changed to DOWN ubt0 on uhub1 ubt0: <Bluetooth Radio> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() ------DMESG------- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (2394.51-MHz K8-class CPU) Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16500551680 (15736 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO CB-01 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-39 on motherboard Launching APs: 1 2 3 Timecounter "TSC-low" frequency 1197254973 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO CB-01> on motherboard acpi0: Power Button (fixed) ACPI Error: No handler for Region [ERAM] (0xfffff800037b1200) [EmbeddedControl] (20181003/evregion-288) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20181003/exfldio-428) ACPI Error: Method parse/execution failed \134_SB.PCI0.LPCB.EC0.BAT0._STA, AE_NOT_EXIST (20181003/psparse-677) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x7> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xc0000000-0xc03fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xc0610000-0xc0613fff irq 16 at device 3.0 on pci0 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xc0600000-0xc060ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xc0614000-0xc0617fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xc0504000-0xc0504fff,0xc0500000-0xc0503fff irq 18 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: ASPM disabled re0: Chip rev. 0x50800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 28:d2:44:dc:d9:32 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xc061c000-0xc061c3ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x5088-0x508f,0x5094-0x5097,0x5080-0x5087,0x5090-0x5093,0x5060-0x507f mem 0xc061b000-0xc061b7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Conexant CX20751/2 HDA CODEC> at cad 0 on hdac1 hdaa1: <Conexant CX20751/2 Audio Function Group> at nid 1 on hdacc1 pcm1: <Conexant CX20751/2 (Analog)> at nid 23 and 26 on hdaa1 pcm2: <Conexant CX20751/2 (Right Analog)> at nid 22 and 25 on hdaa1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST500LM000-SSHD-8GB LVD3> ACS-2 ATA SATA 3.x device ada0: Serial Number W7612QZ0 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <PLDS DVD-RW DA8A5SH RL61> Removable CD-ROM SCSI device cd0: Serial Number O10A11845L1CB4802XES cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus1 usbus0 uhub0: 13 ports with 13 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: <Realtek 802.11n WLAN Adapter> at usbus0 ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 ugen0.3: <Generic USB2.0-CRW> at usbus0 Root mount waiting for: usbus1 usbus0 uhub2: 8 ports with 8 removable, self powered ugen0.4: <Bsion Corp. Lenovo EasyCamera> at usbus0 Root mount waiting for: usbus0 ugen0.5: <Realtek Bluetooth Radio> at usbus0 lo0: link state changed to UP re0: link state changed to DOWN rtwn0 on uhub0 rtwn0: <Realtek 802.11n WLAN Adapter, class 0/0, rev 2.00/2.00, addr 1> on usbus0 rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R ubt0 on uhub0 ubt0: <Bluetooth Radio> on usbus0 wlan0: Ethernet address: 74:da:38:55:ff:aa WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() wlan0: link state changed to UP WARNING pid 1326 (python2.7): ioctl sign-extension ioctl ffffffff80087467 wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: Ethernet address: 74:da:38:55:ff:aa wlan0: link state changed to UP ugen0.2: <Realtek 802.11n WLAN Adapter> at usbus0 (disconnected) rtwn0: at uhub0, port 3, addr 1 (disconnected) wlan0: link state changed to DOWN rtwn0: detached ugen0.2: <Realtek 802.11n WLAN Adapter> at usbus0 rtwn0 on uhub0 rtwn0: <Realtek 802.11n WLAN Adapter, class 0/0, rev 2.00/2.00, addr 5> on usbus0 rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R wlan0: Ethernet address: 74:da:38:55:ff:aa wlan0: link state changed to UP ugen0.2: <Realtek 802.11n WLAN Adapter> at usbus0 (disconnected) rtwn0: at uhub0, port 2, addr 5 (disconnected) wlan0: link state changed to DOWN rtwn0: detached ugen0.2: <Realtek 802.11n WLAN Adapter> at usbus0 rtwn0 on uhub0 rtwn0: <Realtek 802.11n WLAN Adapter, class 0/0, rev 2.00/2.00, addr 6> on usbus0 rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R wlan0: Ethernet address: 74:da:38:55:ff:aa wlan0: link state changed to UP ugen0.2: <Realtek 802.11n WLAN Adapter> at usbus0 (disconnected) rtwn0: at uhub0, port 2, addr 6 (disconnected) wlan0: link state changed to DOWN rtwn0: detached ugen0.2: <Realtek 802.11n WLAN Adapter> at usbus0 rtwn0 on uhub0 rtwn0: <Realtek 802.11n WLAN Adapter, class 0/0, rev 2.00/2.00, addr 7> on usbus0 rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R wlan0: Ethernet address: 74:da:38:55:ff:aa wlan0: link state changed to UP ugen0.2: <Realtek 802.11n WLAN Adapter> at usbus0 (disconnected) rtwn0: at uhub0, port 2, addr 7 (disconnected) wlan0: link state changed to DOWN rtwn0: detached Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done All buffers synced. Uptime: 2h30m25s ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (2394.51-MHz K8-class CPU) Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16500551680 (15736 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO CB-01 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-39 on motherboard Launching APs: 1 2 3 Timecounter "TSC-low" frequency 1197253608 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO CB-01> on motherboard acpi0: Power Button (fixed) ACPI Error: No handler for Region [ERAM] (0xfffff800037c7180) [EmbeddedControl] (20181003/evregion-288) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20181003/exfldio-428) ACPI Error: Method parse/execution failed \134_SB.PCI0.LPCB.EC0.BAT0._STA, AE_NOT_EXIST (20181003/psparse-677) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x7> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xc0000000-0xc03fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xc0610000-0xc0613fff irq 16 at device 3.0 on pci0 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xc0600000-0xc060ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xc0614000-0xc0617fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xc0504000-0xc0504fff,0xc0500000-0xc0503fff irq 18 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x50800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 28:d2:44:dc:d9:32 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xc061c000-0xc061c3ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x5088-0x508f,0x5094-0x5097,0x5080-0x5087,0x5090-0x5093,0x5060-0x507f mem 0xc061b000-0xc061b7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Conexant CX20751/2 HDA CODEC> at cad 0 on hdac1 hdaa1: <Conexant CX20751/2 Audio Function Group> at nid 1 on hdacc1 pcm1: <Conexant CX20751/2 (Analog)> at nid 23 and 26 on hdaa1 pcm2: <Conexant CX20751/2 (Right Analog)> at nid 22 and 25 on hdaa1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST500LM000-SSHD-8GB LVD3> ACS-2 ATA SATA 3.x device ada0: Serial Number W7612QZ0 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <PLDS DVD-RW DA8A5SH RL61> Removable CD-ROM SCSI device cd0: Serial Number O10A11845L1CB4802XES cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus1 usbus0 uhub0: 13 ports with 13 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: <Generic USB2.0-CRW> at usbus0 ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 ugen0.3: <Bsion Corp. Lenovo EasyCamera> at usbus0 Root mount waiting for: usbus1 usbus0 uhub2: 8 ports with 8 removable, self powered ugen0.4: <Realtek Bluetooth Radio> at usbus0 lo0: link state changed to UP re0: link state changed to DOWN ubt0 on uhub0 ubt0: <Bluetooth Radio> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() WARNING pid 1115 (python2.7): ioctl sign-extension ioctl ffffffff80087467 WARNING pid 1119 (python2.7): ioctl sign-extension ioctl ffffffff80087467 Sent with [ProtonMail](https://protonmail.com) Secure Email.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?JyeD5sIb2zkdmLr1_Ob-ETrUaKLdlIFJE5HnOmxuhahIs3Cks4rEEpiWaB1zkO_vkktOQO-nYLs_3SfbIjx8dnw9APqqC0XBsvgcRnRowFo=>