Date: Mon, 8 Jul 2019 18:16:47 +0900 (JST) From: Mori Hiroki <yamori813@yahoo.co.jp> To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: panic on 13-CURRENT Message-ID: <575189220.318858.1562577407386.JavaMail.yahoo@jws704003.mail.kks.yahoo.co.jp> References: <575189220.318858.1562577407386.JavaMail.yahoo.ref@jws704003.mail.kks.yahoo.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi I try to 13-CURRENT today. I have panic on Atheros target. ## Booting image at be060000 ... =C2=A0=C2=A0 Image Name: =C2=A0 FreeBSD Kernel Image =C2=A0=C2=A0 Created:=C2=A0 =C2=A0 =C2=A0 2019-07-08 =C2=A0 9:03:16 UTC =C2=A0=C2=A0 Image Type: =C2=A0 MIPS Linux Kernel Image (lzma compressed) =C2=A0=C2=A0 Data Size:=C2=A0 =C2=A0 1642008 Bytes =3D=C2=A0 1.6 MB =C2=A0=C2=A0 Load Address: 80001100 =C2=A0=C2=A0 Entry Point:=C2=A0 80001100 =C2=A0=C2=A0 Verifying Checksum ... OK =C2=A0=C2=A0 Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80001100) ... ## Giving linux memsize in bytes, 67108864 Starting kernel ... CPU platform: Atheros AR9132 rev 2 CPU Frequency=3D400 MHz CPU DDR Frequency=3D400 MHz CPU AHB Frequency=3D200 MHz platform frequency: 400 MHz CPU reference clock: 5 MHz CPU MDIO clock: 5 MHz arguments:=C2=A0 =C2=A0 a0 =3D 00000007 =C2=A0 a1 =3D a3f5ffb0 =C2=A0 a2 =3D a3f60480 =C2=A0 a3 =3D 00000020 Cmd line:argv is invalid Environment: envp is invalid Cache info: =C2=A0 picache_stride=C2=A0 =C2=A0 =3D 4096 =C2=A0 picache_loopcount =3D 16 =C2=A0 pdcache_stride=C2=A0 =C2=A0 =3D 4096 =C2=A0 pdcache_loopcount =3D 8 =C2=A0 max line size =C2=A0 =C2=A0 =3D 32 cpu0: MIPS Technologies processor v116.147 =C2=A0 MMU: Standard TLB, 16 entries (4K 16K 64K 256K 1M 16M 64M 256M pg si= zes) =C2=A0 L1 i-cache: 4 ways of 512 sets, 32 bytes per line =C2=A0 L1 d-cache: 4 ways of 256 sets, 32 bytes per line =C2=A0 L2 cache: disabled =C2=A0 Config1=3D0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> =C2=A0 Config2=3D0x80000000 =C2=A0 Config3=3D0x20 =C2=A0 Config7=3D0x0 Physical memory chunk(s): 0x551000 - 0x3ffffff, 61534208 bytes (15023 pages) Maxmem is 0x4000000 ---<<BOOT>>--- KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT 469d636484b(zrouter) Buffalo_WZR-HP-G300NH mips gcc version 4.2.1 20070831 patched [FreeBSD] Preloaded elf kernel "kernel" at 0x8054b380. CPU model: Atheros AR9132 rev 2 real memory=C2=A0 =3D 67108864 (65536K bytes) Physical memory chunk(s): 0x005dd000 - 0x03ef8fff, 59883520 bytes (14620 pages) avail memory =3D 59129856 (56MB) arc4random: WARNING: initial seeding bypassed the cryptographic random devi= ce because it was not yet seeded and the knob 'bypass_before_seeding' was e= nabled. random: entropy device external interface wlan: <802.11 Link Layer> snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_ra= te_min=3D1 feeder_rate_max=3D2016000 feeder_rate_round=3D25 mem: <memory> crypto: <crypto core> null: <full device, null device, zero device> [ath_hal] loaded nexus0: <MIPS32 root nexus> clock0: <Generic MIPS32 ticker> on nexus0 Timecounter "MIPS32" frequency 200000000 Hz quality 800 Event timer "MIPS32" frequency 200000000 Hz quality 800 cryptosoft0: <software crypto> on nexus0 crypto: assign cryptosoft0 driver id 0, flags 0x6000000 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0 apb0 at irq 4 on nexus0 uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0 uart0: console (115200,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on a= pb0 gpio0: [GIANT-LOCKED] gpio0: function_set: 0x2000 gpio0: function_clear: 0x0 gpio0: gpio pinmask=3D0x1e5a40 gpiobus0: <GPIO bus> on gpio0 gpioiic0: <GPIO I2C bit-banging driver> at pins 19-20 on gpiobus0 gpioiic0: SCL pin: 20, SDA pin: 19 iicbb0: <I2C bit-banging driver> on gpioiic0 iicbus0: <Philips I2C bus> on iicbb0 master-only iic0: <I2C generic I/O> on iicbus0 panic: device_busy: called for unattached device time =3D 1 KDB: enter: panic [ thread pid 0 tid 100000 ] Stopped at=C2=A0 =C2=A0 =C2=A0 _DYNAMIC_LINKING+0x3: db>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?575189220.318858.1562577407386.JavaMail.yahoo>