Skip site navigation (1)Skip section navigation (2) 
Date:      Mon, 20 Sep 2021 17:11:36 +0300
From:      Stefan Parvu <sparvu@kronometrix.org>
To:        freebsd-arm <freebsd-arm@freebsd.org>
Subject:   FreeBSD 13 Release questions RBPI 3B+
Message-ID:  <2D88BEBC-9520-4DF0-A102-DA4D3FAD2BBE@kronometrix.org>
index | next in thread | raw e-mail 

Hi all,

Is there anything changed on FreeBSD 13 for Raspberry PI 3B+ related to the 
ethernet onboard NIC driver? I have the NIC working, but there are no lights on 
for the NIC port on the Raspberry PI. All lights are off.

freebsd@generic:~ % ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
	ether b8:27:eb:5a:3c:98
	inet 192.168.1.177 netmask 0xffffff00 broadcast 192.168.1.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>


Same network cable, same board works fine with using FreeBSD 12.2 

Any ideas?

Thanks,
Stefan
home | help

Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2D88BEBC-9520-4DF0-A102-DA4D3FAD2BBE>