Date: Mon, 30 Aug 2021 18:05:25 +0000 (UTC) From: zsolty szasz via freebsd-wireless <freebsd-wireless@freebsd.org> To: freebsd-wireless@freebsd.org Subject: hostapd not working after upgrade to 14-CURRENT Message-ID: <1465656488.634601.1630346725972@mail.yahoo.com> References: <1465656488.634601.1630346725972.ref@mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
I have ath setup in hostap mode. I upgraded freebsd from 13-CURRENT to 14-CURRENT last weekend. After this hostapd is not starting.
root@ryzen:~ # ifconfig wlan0
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 18:d6:c7:1c:9e:de
groups: wlan
ssid freebsdap channel 44 (5220 MHz 11a ht/40+) bssid 18:d6:c7:1c:9e:de
regdomain 55 indoor ecm authmode OPEN privacy OFF txpower 30
mcastrate 6 mgmtrate 6 scanvalid 60 ampdulimit 64k ampdudensity 8
shortgi -uapsd wme burst dtimperiod 1 -dfs
parent interface: ath0
media: IEEE 802.11 Wireless Ethernet autoselect mode 11na <hostap>
status: running
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
root@ryzen:~ # service hostapd forcestart
Starting hostapd.
Configuration file: /etc/hostapd.conf
No hostapd driver wrapper available
wlan0: interface state UNINITIALIZED->DISABLED
wlan0: AP-DISABLED
wlan0: CTRL-EVENT-TERMINATING
hostapd_free_hapd_data: Interface wlan0 wasn't started
Here is some infom from dmesg:
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] LDPC transmit/receive enabled
ath0: [HT] 3 RX streams; 3 TX streams
ath0: AR9380 mac 448.3 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
Zsolt SZASZ
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1465656488.634601.1630346725972>