Date: Fri, 24 Feb 2023 14:05:25 -0800 From: Eric Joyner <erj@freebsd.org> To: Alexander Shikov <minotaur@crete.org.ua> Cc: net@freebsd.org Subject: Re: Intel E810-C-Q2 adapter with 13.1-RELEASE Message-ID: <CA%2Bb0zg-JCyx8_7QQ9WCKgjAjyveOrvGa%2BckgjAcXNuxCYdCYxA@mail.gmail.com> In-Reply-To: <20230221155404.GA34918@crete.itcons.net.ua> References: <20230221155404.GA34918@crete.itcons.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
--000000000000b3c73305f579554a Content-Type: text/plain; charset="UTF-8" Hi, I'm not sure how to help here; it looks like there's either an issue with the firmware or a physical issue with the cage. Though, another option you could try would be to download the latest driver from the Intel Download Center and see if that works. If not, then also try the NVMupdate utility from Download Center as well since maybe a firmware update could help fix the issue. Also, that adapter should have two ports and show two devices; is there an ice1 that shows up as well? - Eric On Tue, Feb 21, 2023 at 7:54 AM Alexander Shikov <minotaur@crete.org.ua> wrote: > Hello! > > I have a box with Intel(R) Ethernet Network Adapter E810-C-Q2 running > 13.1-RELEASE. > As far as I understand it should support this NIC, but it doesn't work: > > ice0: flags=8822<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP> > ether b4:96:91:ad:8d:a0 > ifconfig: ice0: no media types? > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > > > Lines from dmesg: > ice0: <Intel(R) Ethernet Network Adapter E810-C-Q2 - 1.34.2-k> mem > 0x92000000-0x93ffffff,0x96010000-0x9601ffff irq 32 at device 0.0 > numa-domain 0 on pci3 > ice0: Loading the iflib ice driver > ice0: Get PHY capabilities failed status = -100, continuing anyway > ice0: The DDP package module (ice_ddp) failed to load or could not be > found. Entering Safe Mode. > ice0: The DDP package module cannot be automatically loaded while booting. > You may want to specify ice_ddp_load="YES" in your loader.conf > ice0: fw 5.1.5 api 1.7 nvm 2.15 etid 800049c3 netlist > 2.1.2000-3.13.0.550223bf oem 1.2789.0 > ice0: Using 1 Tx and Rx queues > ice0: Using MSI-X interrupts with 2 vectors > ice0: Using 1024 TX descriptors and 1024 RX descriptors > ice0: Ethernet address: b4:96:91:ad:8d:a0 > ice0: PCI Express Bus: Speed 8.0GT/s Width x16 > ice0: ice_init_saved_phy_cfg: ice_aq_get_phy_caps (w/MEDIA) failed; status > ICE_ERR_AQ_ERROR, aq_err AQ_RC_EINVAL > ice0: Firmware LLDP agent disabled > ice0: ice_init_link_configuration: ice_aq_set_link_restart_an: status > ICE_ERR_AQ_ERROR, aq_err AQ_RC_EINVAL > ice0: link state changed to DOWN > ice0: ice_add_media_types: ice_aq_get_phy_caps (ACTIVE) failed; status > ICE_ERR_AQ_ERROR, aq_err AQ_RC_EINVAL > ice0: Error adding device media types: ICE_ERR_AQ_ERROR aq_err AQ_RC_EINVAL > ice0: netmap queues/slots: TX 1/1024, RX 1/1024 > > I have ice_ddp_load="YES" in loader.conf. > > Any help is appreciated! Thank you. > > --000000000000b3c73305f579554a Content-Type: text/html; charset="UTF-8" Content-Transfer-Encoding: quoted-printable <div dir=3D"ltr">Hi,<div><br></div><div>I'm not sure how to help here; = it looks like there's either an issue with the firmware or a physical i= ssue with the cage. Though, another option you could try would be to downlo= ad the latest driver from the Intel Download Center and see if that works. = If not, then also try the NVMupdate utility from Download Center as well si= nce maybe a firmware update could help fix the issue.</div><div><br></div><= div>Also, that adapter should have two ports and show two devices; is there= an ice1 that shows up as well?</div><div><br></div><div>- Eric</div></div>= <br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Tue= , Feb 21, 2023 at 7:54 AM Alexander Shikov <<a href=3D"mailto:minotaur@c= rete.org.ua">minotaur@crete.org.ua</a>> wrote:<br></div><blockquote clas= s=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid r= gb(204,204,204);padding-left:1ex">Hello!<br> <br> I have a box with Intel(R) Ethernet Network Adapter E810-C-Q2 running 13.1-= RELEASE.<br> As far as I understand it should support this NIC, but it doesn't work:= <br> <br> ice0: flags=3D8822<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 options=3D4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLA= N_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RX= CSUM_IPV6,TXCSUM_IPV6,NOMAP><br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 ether b4:96:91:ad:8d:a0<br> ifconfig: ice0: no media types?<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_= LINKLOCAL><br> <br> <br> Lines from dmesg:<br> ice0: <Intel(R) Ethernet Network Adapter E810-C-Q2 - 1.34.2-k> mem 0x= 92000000-0x93ffffff,0x96010000-0x9601ffff irq 32 at device 0.0 numa-domain = 0 on pci3<br> ice0: Loading the iflib ice driver<br> ice0: Get PHY capabilities failed status =3D -100, continuing anyway<br> ice0: The DDP package module (ice_ddp) failed to load or could not be found= . Entering Safe Mode.<br> ice0: The DDP package module cannot be automatically loaded while booting. = You may want to specify ice_ddp_load=3D"YES" in your loader.conf<= br> ice0: fw 5.1.5 api 1.7 nvm 2.15 etid 800049c3 netlist 2.1.2000-3.13.0.55022= 3bf oem 1.2789.0<br> ice0: Using 1 Tx and Rx queues<br> ice0: Using MSI-X interrupts with 2 vectors<br> ice0: Using 1024 TX descriptors and 1024 RX descriptors<br> ice0: Ethernet address: b4:96:91:ad:8d:a0<br> ice0: PCI Express Bus: Speed 8.0GT/s Width x16<br> ice0: ice_init_saved_phy_cfg: ice_aq_get_phy_caps (w/MEDIA) failed; status = ICE_ERR_AQ_ERROR, aq_err AQ_RC_EINVAL<br> ice0: Firmware LLDP agent disabled<br> ice0: ice_init_link_configuration: ice_aq_set_link_restart_an: status ICE_E= RR_AQ_ERROR, aq_err AQ_RC_EINVAL<br> ice0: link state changed to DOWN<br> ice0: ice_add_media_types: ice_aq_get_phy_caps (ACTIVE) failed; status ICE_= ERR_AQ_ERROR, aq_err AQ_RC_EINVAL<br> ice0: Error adding device media types: ICE_ERR_AQ_ERROR aq_err AQ_RC_EINVAL= <br> ice0: netmap queues/slots: TX 1/1024, RX 1/1024<br> <br> I have ice_ddp_load=3D"YES" in loader.conf.<br> <br> Any help is appreciated! Thank you.<br> <br> </blockquote></div> --000000000000b3c73305f579554a--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2Bb0zg-JCyx8_7QQ9WCKgjAjyveOrvGa%2BckgjAcXNuxCYdCYxA>