Date: Sat, 17 Jun 2023 16:07:48 -0500 From: "Brandon Bergren" <bdragon@FreeBSD.org> To: "FreeBSD PowerPC ML" <freebsd-ppc@freebsd.org> Subject: Fwd: Re: POWER9 Blackbird Powerup Issue Message-ID: <b2f63e14-fe19-444d-89a3-71554c308f9c@app.fastmail.com>
index | next in thread | raw e-mail
Forwarding, as I used the wrong mail alias by mistake and it bounced. ----- Original message ----- From: Brandon Bergren <freebsd@bdragon.rtk0.net> To: Curtis Hamilton <clhamilto@gmail.com>, FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> Subject: Re: POWER9 Blackbird Powerup Issue Date: Saturday, June 17, 2023 3:27 PM You have a BMC serial port hooked up already, correct? (not to be confused with the host serial port.) Here are the procedures to fix OpenBMC after mishaps. https://wiki.raptorcs.com/wiki/Debricking_the_BMC If those don't work, I would inspect the board carefully for damage. As long as there isn't physical damage, there is always the option of reflashing the BMC. On Sat, Jun 17, 2023, at 2:29 PM, Curtis Hamilton wrote: > I’m have an issue with my blackbird and can’t get support from RaptorCS > because it’s out of warranty. So I wanted to see if anyone else has > experienced the same or similar issue. > > The blackbird refuses to boot into OpenBMC after being powered off to > install a discrete GPU. The OpenBMC led ( ) continues to flash rapidly > with a momentary pause, then continues to flash rapidly. The power led > stays orange. > > I’ve checked raptors wiki, forums and the how-to guides, but don’t see > anything similar to my issue. I’ve tried leaving it completely powered off > for several days but the problem still remains. > > Any suggestions/help would really be appreciated. > > Regards -- Brandon Bergren Technical Generalist -- Brandon Bergren bdragon@FreeBSD.orghome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b2f63e14-fe19-444d-89a3-71554c308f9c>