Date: Fri, 1 Sep 2023 23:06:51 +0100 From: Nuno Teixeira <eduardo@freebsd.org> To: Shawn Webb <shawn.webb@hardenedbsd.org> Cc: freebsd-wireless@freebsd.org, FreeBSD CURRENT <freebsd-current@freebsd.org> Subject: Re: [iwlwifi] ipv6 connection problem Message-ID: <CAFDf7UKEHzpCn-3_tN4ood0B8y68oehnR2oxGWjArNj6bfFRBA@mail.gmail.com> In-Reply-To: <20220813205406.lat5e6aryzliw3op@mutt-hbsd> References: <CAFDf7ULaHmG-yr7_nbi0rWFD3KbNi237FvfFCJGDdBQV0WTP2A@mail.gmail.com> <20220813202027.2mhq7cyuqpntk6h5@mutt-hbsd> <CAFDf7UKs2AYUOXjc0rRnSa0XX9Ntnn==qPN3wBfSrmFTmoxZYQ@mail.gmail.com> <20220813205406.lat5e6aryzliw3op@mutt-hbsd>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
Hello all!
After one year I was in need to use ipv6 on wireless and everything is
working ok.
I'm running 15-CURRENT:
---
wlans_iwlwifi0="wlan0"
create_args_wlan0="wlanmode sta regdomain ETSI country PT"
ifconfig_wlan0_ipv6="inet6 accept_rtadv"
ifconfig_wlan0="WPA SYNCDHCP"
rtsold_enable="YES"
---
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=0
ether 6c:6a:77:df:09:21
inet 192.168.1.68 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::6e6a:77ff:fedf:921%wlan0 prefixlen 64 scopeid 0x3
inet6 2001:8a0:de5b:8300:6e6a:77ff:fedf:921 prefixlen 64 autoconf
pltime 90000 vltime 90000
groups: wlan
ssid MEO-787FB0 channel 11 (2462 MHz 11g) bssid 00:06:91:78:7f:b0
regdomain ETSI country PT authmode WPA2/802.11i privacy ON
deftxkey UNDEF AES-CCM 2:128-bit txpower 30 bmiss 7 scanvalid 60
protmode CTS wme roaming MANUAL
parent interface: iwlwifi0
media: IEEE 802.11 Wireless Ethernet OFDM/18Mbps mode 11g
status: associated
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
---
Thanks all,
Shawn Webb <shawn.webb@hardenedbsd.org> escreveu no dia sábado, 13/08/2022
à(s) 21:55:
> I should have mentioned that my wireless AP isn't your typical AP.
> It's running HardenedBSD 13-STABLE on a PC-Engines APU2 with an
> Atheros WNIC.
>
> Here's the relevant configs on the WAP:
>
> ==== begin rc.conf ====
> ifconfig_igb0="DHCP"
> ifconfig_igb0_ipv6="inet6 accept_rtadv"
>
> wlans_ath0="wlan0"
> create_args_wlan0="wlanmode hostap mode 11a up"
> ifconfig_wlan0="HOSTAP"
>
> cloned_interfaces="bridge0"
> ifconfig_bridge0="addm igb0 addm wlan0 span igb1 up"
> ==== end rc.conf ====
>
> ==== begin hostapd-wlan0.conf ====
> interface=wlan0
> ctrl_interface=/var/run/hostapd-wlan0
> ctrl_interface_group=wheel
> ssid=[redacted]
> wpa=2
> wpa_passphrase=[redacted]
> wpa_key_mgmt=WPA-PSK
> wpa_pairwise=CCMP
> ==== end hostapd-wlan0.conf ====
>
> On Sat, Aug 13, 2022 at 09:49:34PM +0100, Nuno Teixeira wrote:
> > Hello Shawn!
> >
> > I've tested your config:
> > ---
> > wlans_iwlwifi0="wlan0"
> > create_args_wlan0="wlanmode sta regdomain ETSI country PT"
> > ifconfig_wlan0_ipv6="inet6 accept_rtadv"
> > ifconfig_wlan0="WPA DHCP"
> > rtsold_enable="YES"
> > ---
> > and no carrier.
> >
> > Think we have to wait a little more and see if people that use ifwwifi
> > driver do some tests on ipv6.
> >
> > Thanks,
> >
> > Shawn Webb <shawn.webb@hardenedbsd.org> escreveu no dia sábado,
> 13/08/2022
> > à(s) 21:21:
> >
> > > On Sun, Aug 07, 2022 at 06:16:20PM +0100, Nuno Teixeira wrote:
> > > > Hello,
> > > >
> > > > Due to ISP changes I was forced to use ipv6 on my re0 ethernet so I
> can
> > > > have a funcional internet.
> > > >
> > > > Now I'm trying to get ipv6 on iwlwifi (AX201) with /etc/rc.conf:
> > > > ---
> > > > wlans_iwlwifi0="wlan0"
> > > > create_args_wlan0="wlanmode sta regdomain ETSI country PT"
> > > > ifconfig_wlan0_ipv6="inet6 accept_rtadv"
> > > > ifconfig_wlan0="WPA SYNCDHCP"
> > > > rtsold_enable="YES"
> > > > ---
> > > > but wpa_supplicant doesn't connect after trying for some seconds.
> > > >
> > > > How do I obtain more details to help showing my problem?
> > > > I've tried "wpa_supplicant_flags="-f /var/log/wpa.log" without
> success.
> > >
> > > Caveat: the last time I used the iwlwifi driver was somewhere between
> > > one and two months ago, during which time there have been several
> > > changes in src related to wifi/linuxkpi stuff.
> > >
> > > Hardware: Dell Precision 7550, BIOS revision 1.13.0
> > >
> > > Dual stack IPv4+IPv6 worked for me that last time I used iwlwifi.
> > > Here's my relevant configs:
> > >
> > > ==== begin rc.conf ====
> > > ifconfig_em0_ipv6="inet6 accept_rtadv"
> > > ifconfig_em0="DHCP"
> > >
> > > #wlans_iwlwifi0="wlan0"
> > > create_args_wlan0="wlanmode sta"
> > > wlandebug_wlan0="+state +crypto +node +auth +assoc +dot1xsm +wpa"
> > > ifconfig_wlan0="WPA DHCP"
> > > ifconfig_wlan0_ipv6="inet6 accept_rtadv"
> > > ==== end rc.conf ====
> > >
> > > ==== begin `pciconf -lv` ====
> > > iwlwifi0@pci0:0:20:3: class=0x028000 rev=0x00 hdr=0x00 vendor=0x8086
> > > device=0x06f0 subvendor=0x8086 subdevice=0x4070
> > > vendor = 'Intel Corporation'
> > > device = 'Comet Lake PCH CNVi WiFi'
> > > ==== end `pciconf -lv` ====
> > >
> > > ==== begin dmesg.boot ====
> > > 27] iwlwifi0: successfully loaded firmware image
> > > 'iwlwifi-QuZ-a0-hr-b0-71.ucode'
> > > [27] iwlwifi0: api flags index 2 larger than supported by driver
> > > [27] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
> > > [27] iwlwifi0: loaded firmware version 71.058653f6.0
> QuZ-a0-hr-b0-71.ucode
> > > op_mode iwlmvm
> > > [27] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
> > > [28] iwlwifi0: Detected RF HR B3, rfid=0x10a100
> > > [28] iwlwifi0: base HW address: [redacted]
> > > ==== end dmesg.boot ====
> > >
> > > Hopefully this helps. But this is all the info I've got. Please let me
> > > know if you have any questions or comments.
> > >
> > > Thanks,
> > >
> > > --
> > > Shawn Webb
> > > Cofounder / Security Engineer
> > > HardenedBSD
> > >
> > >
> > >
> https://git.hardenedbsd.org/hardenedbsd/pubkeys/-/raw/master/Shawn_Webb/03A4CBEBB82EA5A67D9F3853FF2E67A277F8E1FA.pub.asc
> > >
> >
> >
> > --
> > Nuno Teixeira
> > FreeBSD Committer (ports)
>
> --
> Shawn Webb
> Cofounder / Security Engineer
> HardenedBSD
>
>
> https://git.hardenedbsd.org/hardenedbsd/pubkeys/-/raw/master/Shawn_Webb/03A4CBEBB82EA5A67D9F3853FF2E67A277F8E1FA.pub.asc
>
--
Nuno Teixeira
FreeBSD Committer (ports)
[-- Attachment #2 --]
<div dir="ltr"><div>Hello all!</div><div><br></div><div>After one year I was in need to use ipv6 on wireless and everything is working ok.</div><div>I'm running 15-CURRENT:<br></div><div><br></div><div>---</div><div>wlans_iwlwifi0="wlan0"<br>create_args_wlan0="wlanmode sta regdomain ETSI country PT"<br>ifconfig_wlan0_ipv6="inet6 accept_rtadv"<br>ifconfig_wlan0="WPA SYNCDHCP"<br>rtsold_enable="YES"</div><div>---</div><div>wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500<br> options=0<br> ether 6c:6a:77:df:09:21<br> inet 192.168.1.68 netmask 0xffffff00 broadcast 192.168.1.255<br> inet6 fe80::6e6a:77ff:fedf:921%wlan0 prefixlen 64 scopeid 0x3<br> inet6 2001:8a0:de5b:8300:6e6a:77ff:fedf:921 prefixlen 64 autoconf pltime 90000 vltime 90000<br> groups: wlan<br> ssid MEO-787FB0 channel 11 (2462 MHz 11g) bssid 00:06:91:78:7f:b0<br> regdomain ETSI country PT authmode WPA2/802.11i privacy ON<br> deftxkey UNDEF AES-CCM 2:128-bit txpower 30 bmiss 7 scanvalid 60<br> protmode CTS wme roaming MANUAL<br> parent interface: iwlwifi0<br> media: IEEE 802.11 Wireless Ethernet OFDM/18Mbps mode 11g<br> status: associated<br> nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL></div><div>---</div><div><br></div><div>Thanks all,<br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">Shawn Webb <<a href="mailto:shawn.webb@hardenedbsd.org">shawn.webb@hardenedbsd.org</a>> escreveu no dia sábado, 13/08/2022 à(s) 21:55:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">I should have mentioned that my wireless AP isn't your typical AP.<br>
It's running HardenedBSD 13-STABLE on a PC-Engines APU2 with an<br>
Atheros WNIC.<br>
<br>
Here's the relevant configs on the WAP:<br>
<br>
==== begin rc.conf ====<br>
ifconfig_igb0="DHCP"<br>
ifconfig_igb0_ipv6="inet6 accept_rtadv"<br>
<br>
wlans_ath0="wlan0"<br>
create_args_wlan0="wlanmode hostap mode 11a up"<br>
ifconfig_wlan0="HOSTAP"<br>
<br>
cloned_interfaces="bridge0"<br>
ifconfig_bridge0="addm igb0 addm wlan0 span igb1 up"<br>
==== end rc.conf ====<br>
<br>
==== begin hostapd-wlan0.conf ====<br>
interface=wlan0<br>
ctrl_interface=/var/run/hostapd-wlan0<br>
ctrl_interface_group=wheel<br>
ssid=[redacted]<br>
wpa=2<br>
wpa_passphrase=[redacted]<br>
wpa_key_mgmt=WPA-PSK<br>
wpa_pairwise=CCMP<br>
==== end hostapd-wlan0.conf ====<br>
<br>
On Sat, Aug 13, 2022 at 09:49:34PM +0100, Nuno Teixeira wrote:<br>
> Hello Shawn!<br>
> <br>
> I've tested your config:<br>
> ---<br>
> wlans_iwlwifi0="wlan0"<br>
> create_args_wlan0="wlanmode sta regdomain ETSI country PT"<br>
> ifconfig_wlan0_ipv6="inet6 accept_rtadv"<br>
> ifconfig_wlan0="WPA DHCP"<br>
> rtsold_enable="YES"<br>
> ---<br>
> and no carrier.<br>
> <br>
> Think we have to wait a little more and see if people that use ifwwifi<br>
> driver do some tests on ipv6.<br>
> <br>
> Thanks,<br>
> <br>
> Shawn Webb <<a href="mailto:shawn.webb@hardenedbsd.org" target="_blank">shawn.webb@hardenedbsd.org</a>> escreveu no dia sábado, 13/08/2022<br>
> à(s) 21:21:<br>
> <br>
> > On Sun, Aug 07, 2022 at 06:16:20PM +0100, Nuno Teixeira wrote:<br>
> > > Hello,<br>
> > ><br>
> > > Due to ISP changes I was forced to use ipv6 on my re0 ethernet so I can<br>
> > > have a funcional internet.<br>
> > ><br>
> > > Now I'm trying to get ipv6 on iwlwifi (AX201) with /etc/rc.conf:<br>
> > > ---<br>
> > > wlans_iwlwifi0="wlan0"<br>
> > > create_args_wlan0="wlanmode sta regdomain ETSI country PT"<br>
> > > ifconfig_wlan0_ipv6="inet6 accept_rtadv"<br>
> > > ifconfig_wlan0="WPA SYNCDHCP"<br>
> > > rtsold_enable="YES"<br>
> > > ---<br>
> > > but wpa_supplicant doesn't connect after trying for some seconds.<br>
> > ><br>
> > > How do I obtain more details to help showing my problem?<br>
> > > I've tried "wpa_supplicant_flags="-f /var/log/wpa.log" without success.<br>
> ><br>
> > Caveat: the last time I used the iwlwifi driver was somewhere between<br>
> > one and two months ago, during which time there have been several<br>
> > changes in src related to wifi/linuxkpi stuff.<br>
> ><br>
> > Hardware: Dell Precision 7550, BIOS revision 1.13.0<br>
> ><br>
> > Dual stack IPv4+IPv6 worked for me that last time I used iwlwifi.<br>
> > Here's my relevant configs:<br>
> ><br>
> > ==== begin rc.conf ====<br>
> > ifconfig_em0_ipv6="inet6 accept_rtadv"<br>
> > ifconfig_em0="DHCP"<br>
> ><br>
> > #wlans_iwlwifi0="wlan0"<br>
> > create_args_wlan0="wlanmode sta"<br>
> > wlandebug_wlan0="+state +crypto +node +auth +assoc +dot1xsm +wpa"<br>
> > ifconfig_wlan0="WPA DHCP"<br>
> > ifconfig_wlan0_ipv6="inet6 accept_rtadv"<br>
> > ==== end rc.conf ====<br>
> ><br>
> > ==== begin `pciconf -lv` ====<br>
> > iwlwifi0@pci0:0:20:3: class=0x028000 rev=0x00 hdr=0x00 vendor=0x8086<br>
> > device=0x06f0 subvendor=0x8086 subdevice=0x4070<br>
> > vendor = 'Intel Corporation'<br>
> > device = 'Comet Lake PCH CNVi WiFi'<br>
> > ==== end `pciconf -lv` ====<br>
> ><br>
> > ==== begin dmesg.boot ====<br>
> > 27] iwlwifi0: successfully loaded firmware image<br>
> > 'iwlwifi-QuZ-a0-hr-b0-71.ucode'<br>
> > [27] iwlwifi0: api flags index 2 larger than supported by driver<br>
> > [27] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37<br>
> > [27] iwlwifi0: loaded firmware version 71.058653f6.0 QuZ-a0-hr-b0-71.ucode<br>
> > op_mode iwlmvm<br>
> > [27] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351<br>
> > [28] iwlwifi0: Detected RF HR B3, rfid=0x10a100<br>
> > [28] iwlwifi0: base HW address: [redacted]<br>
> > ==== end dmesg.boot ====<br>
> ><br>
> > Hopefully this helps. But this is all the info I've got. Please let me<br>
> > know if you have any questions or comments.<br>
> ><br>
> > Thanks,<br>
> ><br>
> > --<br>
> > Shawn Webb<br>
> > Cofounder / Security Engineer<br>
> > HardenedBSD<br>
> ><br>
> ><br>
> > <a href="https://git.hardenedbsd.org/hardenedbsd/pubkeys/-/raw/master/Shawn_Webb/03A4CBEBB82EA5A67D9F3853FF2E67A277F8E1FA.pub.asc" rel="noreferrer" target="_blank">https://git.hardenedbsd.org/hardenedbsd/pubkeys/-/raw/master/Shawn_Webb/03A4CBEBB82EA5A67D9F3853FF2E67A277F8E1FA.pub.asc</a><br>;
> ><br>
> <br>
> <br>
> -- <br>
> Nuno Teixeira<br>
> FreeBSD Committer (ports)<br>
<br>
-- <br>
Shawn Webb<br>
Cofounder / Security Engineer<br>
HardenedBSD<br>
<br>
<a href="https://git.hardenedbsd.org/hardenedbsd/pubkeys/-/raw/master/Shawn_Webb/03A4CBEBB82EA5A67D9F3853FF2E67A277F8E1FA.pub.asc" rel="noreferrer" target="_blank">https://git.hardenedbsd.org/hardenedbsd/pubkeys/-/raw/master/Shawn_Webb/03A4CBEBB82EA5A67D9F3853FF2E67A277F8E1FA.pub.asc</a><br>;
</blockquote></div><br clear="all"><br><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature"><div dir="ltr"><span style="color:rgb(102,102,102)">Nuno Teixeira<br>FreeBSD Committer (ports)</span></div></div>
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFDf7UKEHzpCn-3_tN4ood0B8y68oehnR2oxGWjArNj6bfFRBA>