Date: Sun, 13 Apr 2003 16:56:19 +0200 From: Wilko Bulte <wkb@freebie.xs4all.nl> To: Jim <vashquez@yahoo.com> Cc: freebsd-alpha@freebsd.org Subject: Re: problems w/isp0 on MiataGL since 4.7-RELEASE Message-ID: <20030413145619.GA46249@freebie.xs4all.nl> In-Reply-To: <20030413012206.6862.qmail@web40809.mail.yahoo.com> References: <20030413012206.6862.qmail@web40809.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Apr 12, 2003 at 06:22:06PM -0700, Jim wrote: > I have seen the following problem, first when booting from the > 4.7-RELEASE floppies. I also saw it after successfully installing > 4.6.2-RELEASE, while upgrading to the most recent 4.8-STABLE (after > make installkernel, during the reboot into single-user): > > <snip> > Waiting 15 seconds for SCSI devices to settle > isp0: command timed out for 0:15:0 > isp0: command timed out for 0:14:0 > isp0: command timed out for 0:13:0 > isp0: command timed out for 0:12:0 > (probe7:isp0:0:8:0): isp0: watchdog timeout for handle 0x8 > (probe7:isp0:0:9:0): isp0: watchdog timeout for handle 0x9 > (probe7:isp0:0:10:0): isp0: watchdog timeout for handle 0xa > (probe7:isp0:0:11:0): isp0: watchdog timeout for handle 0xb > isp0: cannot find handle 0xb (status 0x6) > isp0: cannot find handle 0xa (status 0x6) > isp0: cannot find handle 0x9 (status 0x6) > isp0: cannot find handle 0x8 (status 0x6) > </snip> > > The same portion of a normal dmesg (from a 4.6.2-RELEASE kernel) looks > like: > > <snip> > Waiting 15 seconds for SCSI devices to settle > Mounting root from ufs:/dev/da0a > da0 at isp0 bus 0 target 0 lun 0 > da0: <DEC RZ2CC-KA (C) DEC 5520> Fixed Direct Access SCSI-2 device > da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing > Enabled > da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) > da1 at isp0 bus 0 target 1 lun 0 > da1: <DEC RZ2CC-KB (C) DEC DC2B> Fixed Direct Access SCSI-2 device > da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing > Enabled > da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) > </snip> > > With this problem, none of the SCSI disks are detected correctly. > > Does anyone know of changes related to the isp driver between > 4.6.2-RELEASE and 4.7-RELEASE that may have caused this problem? Do you have ispfw.ko loaded? If not, I suggest to give that a try. mjacob, the isp(4) author strongly suggests getting the firmware from the .ko and not the isp firmware from the SRM. -- | / o / /_ _ wilko@FreeBSD.org |/|/ / / /( (_) Bulte
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030413145619.GA46249>