Date: Mon, 18 Sep 2006 13:21:59 -0400 From: "Bucky Jordan" <bjordan@lumeta.com> To: <freebsd-jobs@freebsd.org> Subject: Developer to port bce and sata drivers to FreeBSD 4.11 Message-ID: <78ED28FACE63744386D68D8A9D1CF5D42099CD@MAIL.corp.lumeta.com>
next in thread | raw e-mail | index | archive | help
We're looking for a senior level FreeBSD developer (ideally a FreeBSD committer or someone on the release engineering team) to work on porting the following drivers to FreeBSD 4.11. This could also be submitted as a patch back to the community that could be supported by the release engineering team.=20 In particular, this is to support running FreeBSD 4.11 on a Dell 1950/2950. Hardware with remote access (serial console if necessary) can be provided. Below is dmesg output from FreeBSD6.1 amd64. I believe we would need ports for the NIC (bce) and the SATA/SAS controller (mfi). Please contact me directly at the email address below with qualifications and desired rate for further details. We are looking for someone to start ASAP. (Also, it does not need to be the same person for both drivers- if you have experience with one or the other, please get in touch). Thanks, Bucky Jordan bjordan@lumeta.com --- 2950 dmesg --- Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sun May 7 04:15:57 UTC 2006 root@bloom.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP ACPI APIC Table: <DELL PE_SC3 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (2995.50-MHz K8-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6f6 Stepping =3D 6 =20 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> =20 Features2=3D0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b1= 5 >,<b18>> AMD Features=3D0x20100800<SYSCALL,NX,LM> AMD Features2=3D0x1<LAHF> Cores per package: 2 real memory =3D 9395240960 (8960 MB) avail memory =3D 8292061184 (7907 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic1: WARNING: intbase 64 !=3D expected base 24 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 64-87 on motherboard kbd0 at kbdmux0 acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci6: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6 pci7: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7 pci8: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 0.0 on pci8 pci9: <PCI bus> on pcib4 bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.5> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9 bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bce0: Ethernet address: 00:13:72:60:29:82 pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7 pci10: <ACPI PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 0.3 on pci6 pci11: <PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib8 mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff irq 78 at device 14.0 on pci2 pcib9: <PCI-PCI bridge> at device 0.2 on pci1 pci3: <PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci12: <ACPI PCI bus> on pcib10 pcib11: <PCI-PCI bridge> at device 5.0 on pci0 pci13: <PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci14: <ACPI PCI bus> on pcib12 pcib13: <PCI-PCI bridge> at device 7.0 on pci0 pci15: <PCI bus> on pcib13 pcib14: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci4: <ACPI PCI bus> on pcib14 pcib15: <PCI-PCI bridge> at device 0.0 on pci4 pci5: <PCI bus> on pcib15 bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.5> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5 bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz miibus1: <MII bus> on bce1 brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bce1: Ethernet address: 00:13:72:60:29:80 uhci0: <UHCI (generic) USB controller> port 0xdce0-0xdcff irq 21 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xdcc0-0xdcdf irq 20 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xdca0-0xdcbf irq 21 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc600000-0xfc6003ff irq 21 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2 uhub4: multiple transaction translators uhub4: 2 ports with 2 removable, self powered ukbd0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1 kbd1 at ukbd0 ums0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 umass0: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4 umass1: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4 uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 5 uhub5: multiple transaction translators uhub5: 4 ports with 4 removable, self powered pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci16: <ACPI PCI bus> on pcib16 pci16: <display, VGA> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd1: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1 kbd2 at ukbd1 ums0: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff8062a040, 0) error 6 acd0: DVDROM <HL-DT-ST DVD-ROM GDR-8084N/1.01> at ata0-master UDMA33 mfid0: <MFI Logical Disk> on mfi0 mfid0: 1427839MB (2924216319 sectors) RAID SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <Dell Virtual CDROM 123> Removable CD-ROM SCSI-0 device=20 cd0: 40.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present da0 at umass-sim1 bus 1 target 0 lun 0 da0: <Dell Virtual Floppy 123> Removable Direct Access SCSI-0 device=20 da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da0:umass-sim1:1:0:0): SCSI Status: Check Condition (da0:umass-sim1:1:0:0): NOT READY asc:3a,0 (da0:umass-sim1:1:0:0): Medium not present (da0:umass-sim1:1:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da0:umass-sim1:1:0:0): SCSI Status: Check Condition (da0:umass-sim1:1:0:0): NOT READY asc:3a,0 (da0:umass-sim1:1:0:0): Medium not present (da0:umass-sim1:1:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da0:umass-sim1:1:0:0): SCSI Status: Check Condition (da0:umass-sim1:1:0:0): NOT READY asc:3a,0 (da0:umass-sim1:1:0:0): Medium not present (da0:umass-sim1:1:0:0): Unretryable error Opened disk da0 -> 6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?78ED28FACE63744386D68D8A9D1CF5D42099CD>