Date: Wed, 16 Jun 2004 00:58:15 -0400 From: Chris Pepper <pepper@reppep.com> To: freebsd-current@freebsd.org Subject: ACPI hangs on HP 7915 Message-ID: <p06200101bcf55bcf3548@[10.0.1.102]>
next in thread | raw e-mail | index | archive | help
I have an HP Pavilion 7915 which has run 4.5-4.10 happily.
I'm trying out 5.2.1, which ran fine (and rebooted successfully) off
the CD kernel for a few days.
A few minutes ago I rebooted with my REPPEP5 custom kernel
(source cvsupped to HEAD of 20040614), and it hangs at boot time --
twice at exactly the same place (AML breakpoint) in verbose mode.
Safe mode works okay, and this is a test box, so I'm okay.
I'm going to try upgrading the PhoenixBIOS from 3.04 to 3.07
("Core Version" is at 4.06 -- I don't see an update), if HP and
Windows XP can agree on what a Windows executable is
<http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?product=62761&os=228&cc=us&lc=en&dest_page=softwareCategory&tool=softwareCategory&dlc=en&softwareitem=pv161en>;
(Windows won't run the self-extractor -- may try WinZip next).
Assuming that doesn't work, I'll rebuild the kernel without ACPI. I
would appreciate any insights y'all have to offer -- I have seen
notes about ACPI BIOSes being broken in the 5.2.1 Errata and
elsewhere, so perhaps ACPI will just have to stay off for awhile.
Serial output from a hang, as well as dmesg from safe mode,
are below. These, as well as my kernel (REPPEP5), a diff against
GENERIC for 5.2.1, and acpidump output, are all available at
<http://www.reppep.com/~pepper/reppep5/>.
Regards,
Chris Pepper
----
Verbose boot hangs like this:
.??????????????????????????????????????????
. .
. . , ,
. . /( )`
. Welcome to FreeBSD! . \ \___ / |
. . /- _ `-/ '
. . (/\/ \ \ /\
. 1. Boot FreeBSD [default] . / / | ` \
. 2. Boot FreeBSD with ACPI disabled . O O ) / |
. 3. Boot FreeBSD in Safe Mode . `-^--'`< '
. 4. Boot FreeBSD in single user mode . (_.) _ ) /
. 5. Boot FreeBSD with verbose logging . `.___/` /
. 6. Escape to loader prompt . `-----' /
. 7. Reboot . <----. __ / __ \
. . <----|====O)))==) \) /====
. . <----' `--' `.__,' \
. . | |
. . \ / /\
. Select option, [Enter] for default . ______( (_ / \______/
. or [Space] to pause timer 5 . ,' ,-----' |
.?????????????????????????????????????????. `--{__________)
/boot/kernel/acpi.ko text=0x3f1a8 data=0x1744+0x114c
syms=[0x4+0x6290+0x4+0x80]|
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Tue Jun 15 00:01:27 EDT 2004
root@guest.reppep.com:/usr/obj/usr/src/sys/REPPEP5
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0982000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc098221c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (1102.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C>
real memory = 401539072 (382 MB)
avail memory = 380444672 (362 MB)
ACPI APIC Table: <PTLTD APIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
stray irq13
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
Debugger("Executed AML Breakpoint opcode")
Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0
db> where
Debugger(c096a711,30,c3a5e140,1,c0c21a1c) at Debugger+0x54
AcpiOsSignal(1,c096a711,c39bec00,0,c3a6c060) at AcpiOsSignal+0x55
AcpiDsExecEndControlOp(c39bec00,c3a6c060,c39bec00,13,c39bec00) at
AcpiDsExecEndf
AcpiDsExecEndOp(c39bec00,c3a6c060,0,c0c21a5c,c05919b3) at AcpiDsExecEndOp+0xf2
AcpiPsParseLoop(c39bec00,c3a33c40,c0c21b18,c39bec00,c39bede4) at
AcpiPsParseLoo6
AcpiPsParseAml(c39bec00,c3a33cc0,c19c2e00,d385ea79,1) at AcpiPsParseAml+0x7c
AcpiPsxExecute(c19c2e00,0,c0c21ba0,c19c2e00,0) at AcpiPsxExecute+0x202
AcpiNsExecuteControlMethod(c19c2e00,0,c0c21ba0,c3a5e200,0) at
AcpiNsExecuteContf
AcpiNsEvaluateByHandle(c19c2e00,0,0,e,0) at AcpiNsEvaluateByHandle+0x96
AcpiNsEvaluateRelative(c19c2e20,c096b320,0,0,f) at AcpiNsEvaluateRelative+0xde
AcpiNsInitOneDevice(c19c2e20,2,c0c21c8c,0,6) at AcpiNsInitOneDevice+0xb8
AcpiNsWalkNamespace(6,ffffffff,ffffffff,0,c094c150) at AcpiNsWalkNamespace+0xb3
AcpiNsInitializeDevices(0,c0c21ce4,c0958a46,0,2) at
AcpiNsInitializeDevices+0x53
AcpiInitializeObjects(0,2,c0948730,c0942760,0) at AcpiInitializeObjects+0x3a
acpi_attach(c19cf580,c3a4404c,c07bd4f4,c09706f0,c3a117d0) at acpi_attach+0x166
device_probe_and_attach(c19cf580,c19cf700,c0c21d30,c0749edc,c19cf700)
at device9
bus_generic_attach(c19cf700,c19cf700,c0c21d5c,c05b1859,c19cf700) at
bus_generic8
nexus_attach(c19cf700,c3a3504c,c07bd4f4,0,c19c4a0c) at nexus_attach+0x1c
device_probe_and_attach(c19cf700,c19c4a0c,c0c21d80,c0739a39,c39df000)
at device9
root_bus_configure(c39df000,c07b38bc,0,c0c21d98,c0574fa5) at
root_bus_configure8
configure(0,c1e000,c1ec00,c1e000,0) at configure+0x29
mi_startup() at mi_startup+0xb5
begin() at begin+0x2c
db> trace
Debugger(c096a711,30,c3a5e140,1,c0c21a1c) at Debugger+0x54
AcpiOsSignal(1,c096a711,c39bec00,0,c3a6c060) at AcpiOsSignal+0x55
AcpiDsExecEndControlOp(c39bec00,c3a6c060,c39bec00,13,c39bec00) at
AcpiDsExecEndf
AcpiDsExecEndOp(c39bec00,c3a6c060,0,c0c21a5c,c05919b3) at AcpiDsExecEndOp+0xf2
AcpiPsParseLoop(c39bec00,c3a33c40,c0c21b18,c39bec00,c39bede4) at
AcpiPsParseLoo6
AcpiPsParseAml(c39bec00,c3a33cc0,c19c2e00,d385ea79,1) at AcpiPsParseAml+0x7c
AcpiPsxExecute(c19c2e00,0,c0c21ba0,c19c2e00,0) at AcpiPsxExecute+0x202
AcpiNsExecuteControlMethod(c19c2e00,0,c0c21ba0,c3a5e200,0) at
AcpiNsExecuteContf
AcpiNsEvaluateByHandle(c19c2e00,0,0,e,0) at AcpiNsEvaluateByHandle+0x96
AcpiNsEvaluateRelative(c19c2e20,c096b320,0,0,f) at AcpiNsEvaluateRelative+0xde
AcpiNsInitOneDevice(c19c2e20,2,c0c21c8c,0,6) at AcpiNsInitOneDevice+0xb8
AcpiNsWalkNamespace(6,ffffffff,ffffffff,0,c094c150) at AcpiNsWalkNamespace+0xb3
AcpiNsInitializeDevices(0,c0c21ce4,c0958a46,0,2) at
AcpiNsInitializeDevices+0x53
AcpiInitializeObjects(0,2,c0948730,c0942760,0) at AcpiInitializeObjects+0x3a
acpi_attach(c19cf580,c3a4404c,c07bd4f4,c09706f0,c3a117d0) at acpi_attach+0x166
device_probe_and_attach(c19cf580,c19cf700,c0c21d30,c0749edc,c19cf700)
at device9
bus_generic_attach(c19cf700,c19cf700,c0c21d5c,c05b1859,c19cf700) at
bus_generic8
nexus_attach(c19cf700,c3a3504c,c07bd4f4,0,c19c4a0c) at nexus_attach+0x1c
device_probe_and_attach(c19cf700,c19c4a0c,c0c21d80,c0739a39,c39df000)
at device9
root_bus_configure(c39df000,c07b38bc,0,c0c21d98,c0574fa5) at
root_bus_configure8
configure(0,c1e000,c1ec00,c1e000,0) at configure+0x29
mi_startup() at mi_startup+0xb5
begin() at begin+0x2c
db> examine
Debugger+0x54: 6ca41d87
db> show all procs
pid proc uarea uid ppid pgrp flag stat wmesg wchan cmd
44 c3a5c54c d382a000 0 0 0 0000204 new [IWAIT] swi6:+
43 c3a5c710 d382b000 0 0 0 0000204 new [IWAIT] swi7: task queue
42 c3a5c8d4 d382c000 0 0 0 0000204 new [IWAIT] swi7: acpitaskq
41 c3a5ca98 d382d000 0 0 0 0000204 new [IWAIT] swi3: cambio
40 c3a5cc5c d3852000 0 0 0 0000204 new [IWAIT] swi2: camnet
39 c3a5ce20 d3853000 0 0 0 0000204 new [IWAIT] swi5:+
5 c3a5f000 d3854000 0 0 0 0000204 new [RUNQ] taskqueue
38 c39c554c d37f4000 0 0 0 0000204 new [RUNQ] random
4 c39c5710 d37f5000 0 0 0 0000204 new [RUNQ] g_down
3 c39c58d4 d37f6000 0 0 0 0000204 new [RUNQ] g_up
2 c39c5a98 d37f7000 0 0 0 0000204 new [RUNQ] g_event
37 c39c5c5c d37f8000 0 0 0 0000204 new [IWAIT] swi4: vm
36 c39c5e20 d37f9000 0 0 0 000020c new [IWAIT] swi8: clock
35 c39d4000 d37fa000 0 0 0 0000204 new [IWAIT] swi1: net
34 c39d41c4 d381f000 0 0 0 0000204 new [IWAIT] irq0:
33 c39d4388 d3820000 0 0 0 0000204 new [IWAIT] irq23:
32 c39d454c d3821000 0 0 0 0000204 new [IWAIT] irq22:
31 c39d4710 d3822000 0 0 0 0000204 new [IWAIT] irq21:
30 c39d48d4 d3823000 0 0 0 0000204 new [IWAIT] irq20:
29 c19d81c4 d2a13000 0 0 0 0000204 new [IWAIT] irq19:
28 c19d8388 d2a14000 0 0 0 0000204 new [IWAIT] irq18:
27 c19d854c d2a15000 0 0 0 0000204 new [IWAIT] irq17:
26 c19d8710 d2a16000 0 0 0 0000204 new [IWAIT] irq16:
25 c19d88d4 d2a3b000 0 0 0 0000204 new [IWAIT] irq15:
24 c19d8a98 d2a3c000 0 0 0 0000204 new [IWAIT] irq14:
23 c19d8c5c d2a3d000 0 0 0 0000204 new [IWAIT] irq13:
22 c19d8e20 d2a3e000 0 0 0 0000204 new [IWAIT] irq12:
21 c39c5000 d37f1000 0 0 0 0000204 new [IWAIT] irq11:
20 c39c51c4 d37f2000 0 0 0 0000204 new [IWAIT] irq10:
19 c39c5388 d37f3000 0 0 0 0000204 new [IWAIT] irq9: acpi0
18 c19d0000 d29c1000 0 0 0 0000204 new [IWAIT] irq8:
17 c19d01c4 d2a0a000 0 0 0 0000204 new [IWAIT] irq7:
16 c19d0388 d2a0b000 0 0 0 0000204 new [IWAIT] irq6:
15 c19d054c d2a0c000 0 0 0 0000204 new [IWAIT] irq5:
14 c19d0710 d2a0d000 0 0 0 0000204 new [IWAIT] irq4:
13 c19d08d4 d2a0e000 0 0 0 0000204 new [IWAIT] irq3:
12 c19d0a98 d2a0f000 0 0 0 0000204 new [IWAIT] irq1:
11 c19d0c5c d2a10000 0 0 0 000020c [Can run] idle
1 c19d0e20 d2a11000 0 0 0 0000200 new [INACTIVE] swapper
10 c19d8000 d2a12000 0 0 0 0000204 new [RUNQ] ktrace
0 c084b740 c0c1f000 0 0 0 0000200 [CPU 0] swapper
----
Safe boot works fine. Here's the dmesg I got once it came back up:
<Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
Debugger("Executed AML Breakpoint opcode") called.
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.GAME._INI] (Node 0xc19ca580),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.MPU_._INI] (Node 0xc19ca460),
AE_AML_UNINITIALIZED_LOCAL
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.LPT_._CRS] (Node 0xc19ca680),
AE_AML_BUFFER_LIMIT
ACPI-0175: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.LPT_._CRS] (Node 0xc19ca680),
AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.PCI0.LPC0.SIO_.LPT_ - AE_AML_BUFFER_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem
0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 16 at device 1.0 on
pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci0: <Promise PDC20268 UDMA100 controller> port
0x2000-0x200f,0x2010-0x2013,0x2018-0x201f,0x2014-0x2017,0x2020-0x2027
mem 0xf4100000-0xf4103fff irq 16 at device 8.0 on pci1
atapci0: [MPSAFE]
ata2: at 0x2020 on atapci0
ata2: [MPSAFE]
ata3: at 0x2018 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2080-0x20ff mem
0xf4104000-0xf410407f irq 17 at device 9.0 on pci1
xl0: Ethernet address: 00:04:76:df:f2:82
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x2400-0x24ff
mem 0xf4104400-0xf41044ff irq 18 at device 10.0 on pci1
re0: Ethernet address: 00:0e:2e:06:ea:82
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
re0: diagnostic failed, failed to receive packet in loopback mode
re0: attach aborted due to hardware diag failure
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x98
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0629495
stack pointer = 0x10:0xc0c218e4
frame pointer = 0x10:0xc0c218f4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 12
panic: page fault
cpuid = 0;
Uptime: 1s
Shutting down ACPI
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3521c.
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (1102.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 401539072 (382 MB)
avail memory = 380452864 (362 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
Debugger("Executed AML Breakpoint opcode") called.
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.GAME._INI] (Node 0xc19ca580),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.MPU_._INI] (Node 0xc19ca460),
AE_AML_UNINITIALIZED_LOCAL
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.LPT_._CRS] (Node 0xc19ca680),
AE_AML_BUFFER_LIMIT
ACPI-0175: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.LPT_._CRS] (Node 0xc19ca680),
AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.PCI0.LPC0.SIO_.LPT_ - AE_AML_BUFFER_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem
0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 16 at device 1.0 on
pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci0: <Promise PDC20268 UDMA100 controller> port
0x2000-0x200f,0x2010-0x2013,0x2018-0x201f,0x2014-0x2017,0x2020-0x2027
mem 0xf4100000-0xf4103fff irq 16 at device 8.0 on pci1
atapci0: [MPSAFE]
ata2: at 0x2020 on atapci0
ata2: [MPSAFE]
ata3: at 0x2018 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2080-0x20ff mem
0xf4104000-0xf410407f irq 17 at device 9.0 on pci1
xl0: Ethernet address: 00:04:76:df:f2:82
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x2400-0x24ff
mem 0xf4104400-0xf41044ff irq 18 at device 10.0 on pci1
re0: Ethernet address: 00:0e:2e:06:ea:82
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH UDMA66 controller> port 0x10a0-0x10af at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
uhci0: <Intel 82801AA (ICH) USB controller> port 0x1080-0x109f irq 19
at device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem
0xe0000-0xe07ff,0xd8000-0xdbfff,0xc0000-0xc9fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1102504377 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc3b06560
ad0: 38166MB <WDC WD400AB-22BTA0> [77545/16/63] at ata0-master UDMA66
GEOM: create disk ad1 dp=0xc3ae4d60
ad1: 117800MB <IC35L120AVV207-0> [239340/16/63] at ata0-slave UDMA66
acd0: CDROM <OEM CD-ROM F522B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
ipfw2 initialized, divert disabled, rule-based forwarding enabled,
default to deny, logging disabled
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 7 7 1 1
done
Uptime: 1h56m30s
Shutting down ACPI
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3521c.
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (1102.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 401539072 (382 MB)
avail memory = 380452864 (362 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
Debugger("Executed AML Breakpoint opcode") called.
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.GAME._INI] (Node 0xc19ca580),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.MPU_._INI] (Node 0xc19ca460),
AE_AML_UNINITIALIZED_LOCAL
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.LPT_._CRS] (Node 0xc19ca680),
AE_AML_BUFFER_LIMIT
ACPI-0175: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.SIO_.LPT_._CRS] (Node 0xc19ca680),
AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.PCI0.LPC0.SIO_.LPT_ - AE_AML_BUFFER_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem
0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 16 at device 1.0 on
pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci0: <Promise PDC20268 UDMA100 controller> port
0x2000-0x200f,0x2010-0x2013,0x2018-0x201f,0x2014-0x2017,0x2020-0x2027
mem 0xf4100000-0xf4103fff irq 16 at device 8.0 on pci1
atapci0: [MPSAFE]
ata2: at 0x2020 on atapci0
ata2: [MPSAFE]
ata3: at 0x2018 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2080-0x20ff mem
0xf4104000-0xf410407f irq 17 at device 9.0 on pci1
xl0: Ethernet address: 00:04:76:df:f2:82
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x2400-0x24ff
mem 0xf4104400-0xf41044ff irq 18 at device 10.0 on pci1
re0: Ethernet address: 00:0e:2e:06:ea:82
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH UDMA66 controller> port 0x10a0-0x10af at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
uhci0: <Intel 82801AA (ICH) USB controller> port 0x1080-0x109f irq 19
at device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem
0xe0000-0xe07ff,0xd8000-0xdbfff,0xc0000-0xc9fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1102503046 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc3b06560
ad0: 38166MB <WDC WD400AB-22BTA0> [77545/16/63] at ata0-master UDMA66
GEOM: create disk ad1 dp=0xc3ae4d60
ad1: 117800MB <IC35L120AVV207-0> [239340/16/63] at ata0-slave UDMA66
acd0: CDROM <OEM CD-ROM F522B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 6 6 1 1
done
Uptime: 1d21h51m32s
Shutting down ACPI
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Tue Jun 15 00:01:27 EDT 2004
root@guest.reppep.com:/usr/obj/usr/src/sys/REPPEP5
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0982000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc098221c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (1102.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 401539072 (382 MB)
avail memory = 380444672 (362 MB)
ACPI APIC Table: <PTLTD APIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Tue Jun 15 00:01:27 EDT 2004
root@guest.reppep.com:/usr/obj/usr/src/sys/REPPEP5
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0982000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc098221c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (1102.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 401539072 (382 MB)
avail memory = 380444672 (362 MB)
ACPI APIC Table: <PTLTD APIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Tue Jun 15 00:01:27 EDT 2004
root@guest.reppep.com:/usr/obj/usr/src/sys/REPPEP5
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0982000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc098221c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (1102.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 401539072 (382 MB)
avail memory = 380444672 (362 MB)
ACPI APIC Table: <PTLTD APIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Tue Jun 15 00:01:27 EDT 2004
root@guest.reppep.com:/usr/obj/usr/src/sys/REPPEP5
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0931000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (1102.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 401539072 (382 MB)
avail memory = 380456960 (362 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
pcib0: <Intel 82810 (i810 GMCH) Host To Hub bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:1 INTA BIOS irq 9
pci_cfgintr: 0:31 INTD BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 9
agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem
0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 9 at device 1.0 on
pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:8 INTA BIOS irq 9
pci_cfgintr: 1:9 INTA BIOS irq 9
pci_cfgintr: 1:10 INTA BIOS irq 10
atapci0: <Promise PDC20268 UDMA100 controller> port
0x2000-0x200f,0x2010-0x2013,0x2018-0x201f,0x2014-0x2017,0x2020-0x2027
mem 0xf4100000-0xf4103fff irq 9 at device 8.0 on pci1
atapci0: [MPSAFE]
ata2: at 0x2020 on atapci0
ata2: [MPSAFE]
ata3: at 0x2018 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2080-0x20ff mem
0xf4104000-0xf410407f irq 9 at device 9.0 on pci1
xl0: Ethernet address: 00:04:76:df:f2:82
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x2400-0x24ff
mem 0xf4104400-0xf41044ff irq 10 at device 10.0 on pci1
re0: Ethernet address: 00:0e:2e:06:ea:82
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH UDMA66 controller> port 0x10a0-0x10af at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
uhci0: <Intel 82801AA (ICH) USB controller> port 0x1080-0x109f irq 11
at device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801AA (ICH) SMBus controller> port 0x10b0-0x10bf
irq 9 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel ICH (82801AA)> port 0x1300-0x133f,0x1200-0x12ff at
device 31.5 on pci0
pci_cfgintr: 0:31 INTB routed to irq 9
pcm0: <Cirrus Logic CS4299 AC97 Codec>
orm0: <Option ROMs> at iomem
0xe0000-0xe07ff,0xd8000-0xdbfff,0xc0000-0xc9fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
Timecounter "TSC" frequency 1102504566 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled,
default to deny, logging limited to 100 packets/entry by default
GEOM: create disk ad0 dp=0xc3b0e260
ad0: 38166MB <WDC WD400AB-22BTA0> [77545/16/63] at ata0-master PIO4
GEOM: create disk ad1 dp=0xc3b0e060
ad1: 117800MB <IC35L120AVV207-0> [239340/16/63] at ata0-slave PIO4
acd0: CDROM <OEM CD-ROM F522B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?p06200101bcf55bcf3548>