Date: Fri, 21 Sep 2007 09:48:45 +0200 From: =?iso-8859-1?Q?Angel_H=F6ngens?= <angelo@hongens.nl> To: <freebsd-current@freebsd.org> Subject: iscsi port in /etc/services? Message-ID: <000b01c7fc23$d6ee60f0$84cb22d0$@nl>
next in thread | raw e-mail | index | archive | help
Hey guys, my first post here, so don't shoot me. (Don't know if this is = the right place to come with the question) I'm running RELENG_6 (built yesterday)m and after installing the iscsi-target from ports, I found that I could not get it started.. I = got the error "***ERROR*** getaddrinfo: servname not supported for = ai_socktype", which after googling for half an hour turns out to be a cryptic message meaning a service is not found in /etc/services. After getting a later version of /etc/services, the iscsi-target would start, but I was not able to connect using an initiator on another = machine. I then found out these ports in /etc/services: (apparently since rev = 1.112) iscsi 860/tcp iscsi 860/udp While my initiator expected to see port 3260. After some more googling, = I found out port 860 is a port to be used ONLY when in need of a system = TCP port number (?) but by default, port 3260 must be used: RFC3720 says: The well-known user TCP port number for iSCSI connections assigned by IANA is 3260 and this is the default iSCSI port. Implementations needing a system TCP port number may use port 860, the port assigned by IANA as the iSCSI system port; however in order to use port 860, it MUST be explicitly specified - implementations MUST NOT default to use of port 860, as 3260 is the only allowed default. Is this in error in /etc/services, or an error in my logic? Kind regards, Angelo H=F6ngens The Netherlands.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000b01c7fc23$d6ee60f0$84cb22d0$>